Hello, Has anybody experienced frequency drift using the HVR-1600's analog NTSC output? Here are the symptons:
We tune to channel 72 which is around 517.250MHz with ivtv-tune: ivtv-tune -t us-cable -c 72 -d /dev/video0 Sometimes, ivtv-tune reports signal detected, sometimes it doesn't. Sometimes we have to fine tune to a higher/lower frequency like this: ivtv-tune -t us-cable -f 518.000 -d /dev/video0 This seems to work for a few hours, maybe one day, and then the signal has a lot of noise in it again. Sometimes, ivtv-tune can't find any signal. Here are our specs: Dell PowerEdge 2650 w/ 4GB RAM (2 Dual-Core Xeon 3.2GHz) ATI Radeon XL (Old card but we're multicasting with VLC so it doesn't matter). 2 - Hauppauge HVR-1600 TV Tuner Cards CX18 driver reports firmware version 0.0.71.0 (12/29/2006) for TV cards. Thanks. ________________________________________________ This mail was sent by UebiMiau 2.5 _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
