|
Greetings,
I have a PVR-500 in an MSI MediaLive chassis (only 1 PCI slot) running CentOS 5 (2.6.18 kernel). With ivtv 0.10.6 and latest firmware, the first tuner appears to load the firmware correctly, but the second does not. With Windows on the same hardware configuration, both tuners work okay. I'm green in this area, but...could this be an IRQ issue?
Any help would be appreciated.
Craig
#dmesg
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.10.6 (tagged release) loading ivtv: Linux version: 2.6.18-92.1.6.el5.centos.plus SMP mod_unload gcc-4.1 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge card (cx23416 based) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 18 GSI 21 sharing vector 0x32 and IRQ 21 ACPI: PCI Interrupt 0000:05:08.0[A] -> Link [LNKC] -> GSI 18 (level, low) -> IRQ 50 ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 22 (level, low) -> IRQ 217 PCI: Setting latency timer of device 0000:00:10.1 to 64 hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: Encoder revision: 0x02060039 tveeprom 2-0050: Hauppauge model 23552, rev E592, serial# 10469696 tveeprom 2-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57) tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 2-0050: audio processor is CX25843 (idx 37) tveeprom 2-0050: decoder processor is CX25843 (idx 30) tveeprom 2-0050: has radio, has no IR remote ivtv0: Autodetected WinTV PVR 500 (unit #1) tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0) tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 2-0060: TEA5767 detected. tuner 2-0060: chip found @ 0xc0 (ivtv i2c driver #0) tuner 2-0060: type set to 62 (Philips TEA5767HN FM Radio) tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) floppy0: no floppy controllers found cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes) wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: Registered device video0 for encoder MPEG (4 MB) ivtv0: Registered device video32 for encoder YUV (2 MB) ivtv0: Registered device vbi0 for encoder VBI (1 MB) ivtv0: Registered device video24 for encoder PCM audio (1 MB) ivtv0: Registered device radio0 for encoder radio tuner 2-0061: type set to 57 (Philips FQ1236A MK4) ivtv0: Initialized WinTV PVR 500 (unit #1), card #0 ivtv: ====================== NEXT CARD ====================== ivtv1: Autodetected Hauppauge card (cx23416 based) ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 17 GSI 22 sharing vector 0x3A and IRQ 22 ACPI: PCI Interrupt 0000:05:09.0[A] -> Link [LNKD] -> GSI 17 (level, low) -> IRQ 58 ivtv1: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv1: Retry loading firmware ivtv1: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv1: Error initializing firmware ivtv1: Error -19 on initialization ivtv: ==================== END INIT IVTV ==================== #cat /proc/interrupts CPU0 CPU1 0: 51152232 0 IO-APIC-edge timer 1: 3 0 IO-APIC-edge i8042 8: 1 0 IO-APIC-edge rtc 9: 0 0 IO-APIC-level acpi 12: 4 0 IO-APIC-edge i8042 14: 29034 420282 IO-APIC-edge ide0 50: 10010 304899 IO-APIC-level ivtv0 201: 10911 10867763 IO-APIC-level ehci_hcd:usb1, sata_nv 209: 41 47 IO-APIC-level ohci_hcd:usb2 217: 77600 138668 IO-APIC-level sata_nv, HDA Intel 225: 2145 5429006 IO-APIC-level eth0 233: 3787 3110875 IO-APIC-level nvidia NMI: 1156 1115 LOC: 51140088 51140804 ERR: 0 MIS: 0 |
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
