<quote who="Andy Walls"> > On Fri, 2008-07-11 at 20:56 -0400, Josh Becigneul wrote: >> >> Not sure why this happens, any ideas? >> > > lirc_i2c is the receive only module. lirc_pvr150 is a module that > handles both Tx and Rx. I suspect they are mutually exclusive: you > probably can't load lirc_i2c and lirc_pvr150 together. Try to inhibit > the load of the lirc_i2c module. > > Regards, > Andy
Andy, I moved the lirc_i2c driver so it can never be loaded. Running modprobe lirc_pvr150 results in the following: otherbox misc # modprobe lirc_pvr150 FATAL: Could not open '/lib/modules/2.6.24-gentoo-r4/misc/lirc_i2c.ko': No such file or directory And this is from my syslog: Jul 12 00:29:16 otherbox ivtv: Start initialization, version 1.3.0 Jul 12 00:29:16 otherbox ivtv: End initialization Jul 12 00:29:16 otherbox lirc_dev: IR Remote Control driver registered, major 61 Jul 12 00:29:17 otherbox lirc_pvr150: chip found with RX and TX Jul 12 00:29:17 otherbox lirc_dev: lirc_register_plugin: sample_rate: 0 Jul 12 00:29:17 otherbox lirc_pvr150: firmware of size 302355 loaded Jul 12 00:29:17 otherbox lirc_pvr150: 743 codesets loaded Jul 12 00:29:17 otherbox i2c-adapter i2c-1: Used 4 tries to write to client at 0x70: success Jul 12 00:29:17 otherbox lirc_pvr150: Hauppauge PVR-150 IR blaster: firmware version 2.1.0 Jul 12 00:29:17 otherbox i2c-adapter i2c-2: NAK from device addr 0x70 msg #0 Jul 12 00:29:17 otherbox i2c-adapter i2c-2: NAK from device addr 0x71 msg #0 Jul 12 00:29:17 otherbox lirc_pvr150: cx18 i2c driver #0-1: no devices found So far so good... Running irsend results in the following: otherbox bin # ./irsend SEND_ONCE blaster POWER buffer: -BEGIN- buffer: -SEND_ONCE blaster POWER- buffer: -ERROR- irsend: command failed: SEND_ONCE blaster POWER buffer: -DATA- buffer: -1- buffer: -transmission failed- irsend: transmission failed buffer: -END- lircd -n says: lircd: accepted new client on /dev/lircd lircd: write failed lircd: Remote I/O error lircd: error processing command: SEND_ONCE blaster POWER lircd: transmission failed lircd: removed client Syslog says: Jul 12 00:47:49 otherbox i2c-adapter i2c-1: NAK from device addr 0x70 msg #0 Jul 12 00:47:49 otherbox lirc_pvr150: i2c_master_send failed with -121 Jul 12 00:47:49 otherbox lirc_pvr150: sending to the IR transmitter chip failed, trying reset Jul 12 00:47:49 otherbox i2c-adapter i2c-1: Used 4 tries to write to client at 0x70: success Jul 12 00:47:49 otherbox lirc_pvr150: unexpected IR TX response: a0 Jul 12 00:47:49 otherbox i2c-adapter i2c-1: NAK from device addr 0x70 msg #0 Jul 12 00:47:49 otherbox lirc_pvr150: i2c_master_send failed with -121 Jul 12 00:47:49 otherbox lirc_pvr150: sending to the IR transmitter chip failed, trying reset Jul 12 00:47:50 otherbox i2c-adapter i2c-1: Used 4 tries to write to client at 0x70: success Jul 12 00:47:50 otherbox lirc_pvr150: unexpected IR TX response: a0 Jul 12 00:47:50 otherbox i2c-adapter i2c-1: NAK from device addr 0x70 msg #0 Jul 12 00:47:50 otherbox lirc_pvr150: i2c_master_send failed with -121 Jul 12 00:47:50 otherbox lirc_pvr150: sending to the IR transmitter chip failed, trying reset Jul 12 00:47:50 otherbox i2c-adapter i2c-1: Used 4 tries to write to client at 0x70: success Jul 12 00:47:50 otherbox lirc_pvr150: unexpected IR TX response: a0 Jul 12 00:47:50 otherbox i2c-adapter i2c-1: NAK from device addr 0x70 msg #0 Jul 12 00:47:50 otherbox lirc_pvr150: i2c_master_send failed with -121 Jul 12 00:47:50 otherbox lirc_pvr150: sending to the IR transmitter chip failed, trying reset Jul 12 00:47:50 otherbox lirc_pvr150: unable to send to the IR chip after 3 resets, giving up Hope this helps... I'm going to run downstairs and see if the light on the blaster blinks at all. I also found this thread which is a little more complete: http://mysettopbox.tv/phpBB2/viewtopic.php?t=6206&postdays=0&postorder=asc&start=0&sid=88e71f09b17342208fcaca9e220bdd4d -Josh Becigneul _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
