Hi,
I also can't get any channels on my hauppage pvr 150.
(looks th same problem as the thread :Can't tune (PVR-150 and ivtv
1.0.3, Linux 2.6.24)"
My tv does not work with ivtv, scantv, tvtime etc.
Distribution : ubuntu 8.0.4
My dmesg output:
80.284961] Linux video capture interface: v2.00
[ 80.596421] Linux agpgart interface v0.102
[ 80.810416] ivtv: Start initialization, version 1.1.0
[ 80.810514] ivtv0: Initializing card #0
[ 80.810517] ivtv0: Autodetected Hauppauge card (cx23416 based)
[ 80.819168] ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 21 (level,
low) -> IRQ 21
[ 80.833830] nvidia: module license 'NVIDIA' taints kernel.
[ 81.158841] tveeprom 1-0050: The eeprom says no radio is present, but
the tuner type
[ 81.158844] tveeprom 1-0050: indicates otherwise. I will assume that
radio is present.
[ 81.158847] tveeprom 1-0050: Hauppauge model 26589, rev C9A5, serial#
9478722
[ 81.158849] tveeprom 1-0050: tuner model is TCL MPE05-2 (idx 105,
type 38)
[ 81.158852] tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L')
PAL(D/D1/K) (eeprom 0x74)
[ 81.158854] tveeprom 1-0050: audio processor is CX25843 (idx 37)
[ 81.158856] tveeprom 1-0050: decoder processor is CX25843 (idx 30)
[ 81.158858] tveeprom 1-0050: has radio, has no IR receiver, has no IR
transmitter
[ 81.158860] ivtv0: Autodetected Hauppauge WinTV PVR-150
[ 81.420844] tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
[ 81.420865] tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)
[ 81.420867] tuner 1-0043: type set to tda9887
[ 81.423850] tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
[ 81.557630] cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver
#0)
[ 81.874373] wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
[ 81.882105] tuner-simple 1-0061: type set to 38 (Philips PAL/SECAM
multi (FM1216ME MK3))
[ 81.882108] tuner 1-0061: type set to Philips PAL/SECAM m
[ 81.882299] ivtv0: Registered device video0 for encoder MPG (4096 kB)
[ 81.882312] ivtv0: Registered device video32 for encoder YUV (2048
kB)
[ 81.882325] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
[ 81.882338] ivtv0: Registered device video24 for encoder PCM (320 kB)
[ 81.882351] ivtv0: Registered device radio0 for encoder radio
[ 81.882352] ivtv0: Initialized card #0: Hauppauge WinTV PVR-150
[ 81.882365] ivtv: End initialization
[ 95.436143] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
[ 95.483996] Clocksource tsc unstable (delta = -70640029 ns)
[ 95.579045] ivtv0: Encoder revision: 0x02060039
[ 98.300175] cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382
bytes)
lsmod says it has loaded the module
Maybe it has something to do with udev????
I did follow all instructions, but I did not understand the section
about udev. I have looked in /etc/udev/*, but nothing about ivtv.
So I suppose, that I have to do it myself:
The example in the HOWTO says
DRIVERS=="ivtv", ATTR{name}=="ivtv? encoder
MPEG",KERNELS=="0000:02:08.0", SYMLINK+="pvr_500_1"
So I need to add a rule for pvr_150. What is the name of the file, where
this rule has to got to? How can I find the value for the KERNEL ??
Any help would be appreciated,
Peter
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
