At 61 I still get no sound but it get interesting at 91 where the sound plays accelerated in short bouts every other second. 121 works great.
On Sun, Sep 7, 2008 at 8:43 PM, Andy Walls <[EMAIL PROTECTED]> wrote: > On Sat, 2008-09-06 at 16:12 -0400, Richard Ayotte wrote: >> Thank you for the quick response. Setting mmio_ndelay=0 fixed the >> problem. Your work is appreciated. > > Rich, > > Could you also try a value of mmio_ndelay=61 or 91 or 121 to see if any > of those work. We'll assume the default of 31 still doesn't work for > you. > > If one of these higher values works for you, I would recommend using it, > rather than the setting of 0. > > Regards, > Andy > > >> Rich >> >> On Sat, Sep 6, 2008 at 3:28 PM, Andy Walls <[EMAIL PROTECTED]> wrote: >> > On Sat, 2008-09-06 at 13:02 -0400, Richard Ayotte wrote: >> >> Hi, >> >> >> >> I initially had audio problems in MythTV that were later resolved at >> >> the end of July with this patch. >> >> >> >> http://linuxtv.org/hg/v4l-dvb/rev/6fc3c82281f3 >> >> >> >> But with the latest driver I'm have a different audio problem - no >> >> audio at all except for the occasional screech. System sounds still >> >> work fine so I've ruled out sound card problems. >> >> >> >> I'm using the analog tuner on Ubuntu Hardy with the Intrepid ivtv >> >> package on an AMD64 Opteron with 4G RAM. >> >> >> >> Here's some system info: >> >> >> >> $ ivtvctl --version >> >> ivtvctl version 1.2.0 (tagged release) >> >> >> >> $ dmesg |grep cx18 >> >> [ 261.019358] cx18: Start initialization, version 1.0.0 >> >> [ 261.019472] cx18-0: Initializing card #0 >> >> [ 261.019520] cx18-0: Autodetected Hauppauge card >> >> [ 261.020056] cx18-0: Unreasonably low latency timer, setting to 64 (was >> >> 32) >> >> [ 261.021537] cx18-0: cx23418 revision 01010000 (B) >> >> [ 261.217148] cx18-0: Autodetected Hauppauge HVR-1600 >> >> [ 261.217195] cx18-0: VBI is not yet supported >> >> [ 262.090741] tuner 3-0043: chip found @ 0x86 (cx18 i2c driver #0-1) >> >> [ 262.131668] tuner 3-0061: chip found @ 0xc2 (cx18 i2c driver #0-1) >> >> [ 262.131751] cs5345 2-004c: chip found @ 0x98 (cx18 i2c driver #0-0) >> >> [ 262.178526] cx18-0: Disabled encoder IDX device >> >> [ 262.178626] cx18-0: Registered device video0 for encoder MPEG (2 MB) >> >> [ 262.178678] DVB: registering new adapter (cx18) >> >> [ 262.318897] cx18-0: DVB Frontend registered >> >> [ 262.318971] cx18-0: Registered device video32 for encoder YUV (2 MB) >> >> [ 262.319038] cx18-0: Registered device video24 for encoder PCM audio (1 >> >> MB) >> >> [ 262.319107] cx18-0: Registered device radio0 for encoder radio >> >> [ 262.319978] cx18-0: Initialized card #0: Hauppauge HVR-1600 >> >> [ 262.320050] cx18: End initialization >> >> [ 278.130281] cx18-0: loaded v4l-cx23418-apu.fw firmware V00120000 >> >> (141200 bytes) >> >> [ 278.500794] cx18-0: loaded v4l-cx23418-cpu.fw firmware (158332 bytes) >> >> [ 278.504205] cx18-0: FW version: 0.0.74.0 (Release 2007/03/12) >> >> [ 279.169571] cx18-0: loaded v4l-cx23418-dig.fw firmware (16382 bytes) >> >> >> >> >> >> $ v4l2-ctl -d /dev/video0 --log-status >> >> >> >> Status Log: >> >> >> >> [ 1163.389925] cx18-0: ================= START STATUS CARD #0 >> >> ================= >> >> [ 1163.411465] tveeprom 2-0050: Hauppauge model 74541, rev C6B6, >> >> serial# 3326793 >> >> [ 1163.411471] tveeprom 2-0050: MAC address is 00-0D-FE-32-C3-49 >> >> [ 1163.411475] tveeprom 2-0050: tuner model is Philips FM1236 MK5 >> >> (idx 116, type 43) >> >> [ 1163.411479] tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) >> >> [ 1163.411482] tveeprom 2-0050: audio processor is CX23418 (idx 38) >> >> [ 1163.411484] tveeprom 2-0050: decoder processor is CX23418 (idx 31) >> >> [ 1163.411488] tveeprom 2-0050: has radio >> >> [ 1163.411493] cx18-0: Video signal: present >> >> [ 1163.411496] cx18-0: Detected format: NTSC-M >> >> [ 1163.411499] cx18-0: Specified standard: NTSC-M >> >> [ 1163.411501] cx18-0: Specified video input: Composite 7 >> >> [ 1163.411504] cx18-0: Specified audioclock freq: 32000 Hz >> >> [ 1163.411511] cx18-0: Detected audio mode: mono >> >> [ 1163.411514] cx18-0: Detected audio standard: no detected audio >> >> standard >> >> [ 1163.411517] cx18-0: Audio muted: yes >> >> [ 1163.411520] cx18-0: Audio microcontroller: running >> >> [ 1163.411523] cx18-0: Configured audio standard: automatic detection >> > >> > Somehow I broke the audio microcontroller auto audio standard detection >> > by slowing down IO accesses to the CX23418 (by 1 PCI clock cycle >> > each!?). This is only a problem on 1 of my three machines: the 1 I >> > didn't test the change on of course. >> > >> > I'll submit a quick fix to be pulled for v4l-dvb, and then try to figure >> > out what's going on. Until then load the module with the mmio_ndelay >> > parameter set to 0: >> > >> > # modprobe cx18 mmio_ndelay=0 >> > >> > That fixes the problem for me. >> > >> > >> >> [ 1163.411526] cx18-0: Configured audio system: BTSC >> >> [ 1163.411529] cx18-0: Specified audio input: Tuner (In8) >> >> [ 1163.411532] cx18-0: Preferred audio mode: stereo >> >> [ 1163.412726] cs5345 2-004c: Input: 1 >> >> [ 1163.412729] cs5345 2-004c: Volume: 0 dB >> >> [ 1163.412733] tda9887 3-0043: Data bytes: b=0x14 c=0x30 e=0x44 >> >> [ 1163.412737] tuner 3-0061: Tuner mode: analog TV >> >> [ 1163.412740] tuner 3-0061: Frequency: 77.25 MHz >> >> [ 1163.412743] tuner 3-0061: Standard: 0x0000b000 >> >> [ 1163.412747] cx18-0: Video Input: Tuner 1 >> >> [ 1163.412749] cx18-0: Audio Input: Tuner 1 >> >> [ 1163.412752] cx18-0: GPIO: direction 0x00003001, value 0x00003001 >> >> [ 1163.412755] cx18-0: Tuner: TV >> >> [ 1163.412758] cx18-0: Stream: MPEG-2 Program Stream >> >> [ 1163.412761] cx18-0: VBI Format: No VBI >> >> [ 1163.412764] cx18-0: Video: 720x480, 30 fps >> >> [ 1163.412767] cx18-0: Video: MPEG-2, 4x3, Variable Bitrate, >> >> 4500000, Peak 6000000 >> >> [ 1163.412772] cx18-0: Video: GOP Size 15, 2 B-Frames, GOP Closure >> >> [ 1163.412776] cx18-0: Audio: 32 kHz, MPEG-1/2 Layer II, 384 kbps, >> >> Stereo, No Emphasis, No CRC >> >> [ 1163.412781] cx18-0: Spatial Filter: Manual, Luma 1D Horizontal, >> >> Chroma 1D Horizontal, 0 >> >> [ 1163.412785] cx18-0: Temporal Filter: Manual, 8 >> >> [ 1163.412788] cx18-0: Median Filter: Off, Luma [0, 255], Chroma [0, >> >> 255] >> >> [ 1163.412791] cx18-0: Status flags: 0x00200001 >> >> [ 1163.412794] cx18-0: Stream encoder MPEG: status 0x0000, 0% of >> >> 2016 KiB (63 buffers) in use >> >> [ 1163.412798] cx18-0: Stream encoder YUV: status 0x0000, 0% of >> >> 2048 KiB (16 buffers) in use >> >> [ 1163.412802] cx18-0: Stream encoder PCM audio: status 0x0000, 0% >> >> of 1008 KiB (63 buffers) in use >> >> [ 1163.412806] cx18-0: Read MPEG/VBI: 8210432/0 bytes >> >> [ 1163.412809] cx18-0: ================== END STATUS CARD #0 >> >> ================== >> >> >> >> The odd thing from this status is that the audio is muted and it stays >> >> muted even when I run v4l2-ctl -c mute=0. >> > >> > The audio microcontroller is free to muck with the mute control if it >> > thinks the audio on the tuner SIF has changed. >> > >> > Regards, >> > Andy >> > >> > >> > >> > >> > _______________________________________________ >> > ivtv-users mailing list >> > [email protected] >> > http://ivtvdriver.org/mailman/listinfo/ivtv-users >> > >> >> >> > > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users > -- Richard _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
