Hi, I'm running Mandriva 2008.1 2.6.22.18-desktop-1mdv with my own compiled version of myth (svn.021-fixes). Everything is working great, that is until I decided to try out the IR blasters.
I've been following the various guides on getting lirc compiled to use the blaster firmware. I have a single blaster working just fine. However, when I plug in the second ir blaster to the second pvr-150 I don't find that it is recognized. I hope I'm missing something obvious and just need some fresh advice. To recap just a bit: On boot the modules 'lirc_dev' and 'lirc_pvr150' are loaded fine. I only see a single /dev/lirc0 device file. I think I should see two if both remote dongles (with blaster) were active. Is that true? Any suggestions? Rick ------ Output from log: Sep 12 23:43:45 myhost kernel: lirc_dev: IR Remote Control driver registered, major 61 Sep 12 23:43:45 myhost kernel: lirc_pvr150: chip found with RX and TX Sep 12 23:43:45 myhost kernel: lirc_dev: lirc_register_plugin: sample_rate: 0 Sep 12 23:43:45 myhost kernel: lirc_pvr150: firmware of size 302355 loaded Sep 12 23:43:45 myhost kernel: lirc_pvr150: 743 codesets loaded Sep 12 23:43:45 myhost kernel: lirc_pvr150: Hauppauge PVR-150 IR blaster: firmware version 1.3.0 Sep 12 23:43:45 myhost kernel: lirc_pvr150: ivtv i2c driver #1: no devices found _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
