Sorry to change the thread but - I just joined the list.
Running Mythdora 5
cx18: Start initialization, version 1.0.0
cx18-0: Initializing card #0
cx18-0: Autodetected Hauppauge card
ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 18 (level, low) -> IRQ 19
cx18-0: cx23418 revision 01010000 (B)
tveeprom 1-0050: Hauppauge model 74041, rev C6B2, serial# 3101709
tveeprom 1-0050: MAC address is 00-0D-FE-2F-54-0D
tveeprom 1-0050: tuner model is TCL M2523_5N_E (idx 112, type 50)
tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 1-0050: audio processor is CX23418 (idx 38)
tveeprom 1-0050: decoder processor is CX23418 (idx 31)
tveeprom 1-0050: has no radio, has IR receiver, has IR transmitter
cx18-0: Autodetected Hauppauge HVR-1600
cx18-0: VBI is not yet supported
tuner 2-0061: chip found @ 0xc2 (cx18 i2c driver #0-1)
cs5345 1-004c: chip found @ 0x98 (cx18 i2c driver #0-0)
tuner-simple 2-0061: creating new instance
tuner-simple 2-0061: type set to 50 (TCL 2002N)
cx18-0: Disabled encoder IDX device
cx18-0: Registered device video0 for encoder MPEG (2 MB)
DVB: registering new adapter (cx18)
MXL5005S: Attached at address 0x63
DVB: registering frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)...
cx18-0: DVB Frontend registered
cx18-0: Registered device video32 for encoder YUV (2 MB)
cx18-0: Registered device video24 for encoder PCM audio (1 MB)
cx18-0: Initialized card #0: Hauppauge HVR-1600
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1f.5 to 64
cx18: End initialization
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
