> > I don't know if this is a problem for others, but I've been attempting to > build the dvb module set, both trunk and the file set tip.tar.bz2, and > getting an error when it got to saa5249.c, it seemed to be a header issue, > I'm running gentoo with the 2.6.26 linux headers. I found that by adding > "#include " to the headers I was able to build the files.
Which include? I know about this, but both myself and others are away on vacation/conference so I haven't had the time to look into it. But if you know which header to include, then I can make a quick patch for it. I used the include linux/delay.h, and now it compiles, however (funny how the most important part of the message was 7 characters, and thy are the ones that got missed...) I am, however, running into an insertion problem now... I'm afraid their connected the following is my dmesg: Linux video capture interface: v2.00 cx18: Start initialization, version 1.0.0 cx18-0: Initializing card #0 cx18-0: Autodetected Hauppauge card ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18 cx18-0: Unreasonably low latency timer, setting to 64 (was 32) cx18-0: cx23418 revision 01010000 (B) tveeprom 2-0050: Huh, no eeprom present (err=-121)? tveeprom 2-0050: Encountered bad packet header [01]. Corrupt or not a Hauppauge eeprom. cx18-0: Invalid EEPROM cx18-0: VBI is not yet supported tuner 3-0043: chip found @ 0x86 (cx18 i2c driver #0-1) tda9887 3-0043: creating new instance tda9887 3-0043: tda988[5/6/7] found tuner 3-0061: chip found @ 0xc2 (cx18 i2c driver #0-1) cs5345 2-004c: chip found @ 0x98 (cx18 i2c driver #0-0) cx18-0: Disabled encoder IDX device cx18-0: Registered device video1 for encoder MPEG (2 MB) DVB: registering new adapter (cx18) s5h1409_readreg: readreg error (ret == -121) cx18-0: frontend initialization failed cx18-0: DVB failed to register cx18-0: Registered device video2 for encoder YUV (2 MB) cx18-0: Registered device video3 for encoder PCM audio (1 MB) cx18-0: Registered device radio0 for encoder radio cx18-0: Error -12 registering devices tda9887 3-0043: destroying instance cx18-0: Error -12 on initialization cx18: probe of 0000:00:0a.0 failed with error -12 cx18: End initialization I hope it's not false hope, I'm also interested if there is a git checkout known to work. In retrospect, I don't think it's a headers change issue, because I never changed them on this computer until now. Thanks, cctsurf _________________________________________________________________ Stay up to date on your PC, the Web, and your mobile phone with Windows Live. http://clk.atdmt.com/MRT/go/msnnkwxp1020093185mrt/direct/01/ _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
