Hello, I have problem with my card I have seen in a few posts but I never seen any reply. My card is detecting sound on about 80% of channels without a problem. But there are some channels that sometimes have very big lag in detection (up to one hour). And there is a few channels that when I tune just after I power up my machine have sound. When I tune to another one and back to this one there is no sound (--log-status is showing "detecting"). But when I stop watching and tune same channel twice it get sound. It is a problem when I want to record something from a few channels and then some of my recordings have no sound at all. Very rarely when I tune channel without audio twice then audio is misdetected
I have been trying to enable "pvr150_workaround" that is in the driver "ivtv driver" with adding my tuner number as "case" in switch but it have not helped me. I have been trying to use tips posted here: http://www.ivtvdriver.org/pipermail/ivtv-users/2005-November/000388.html but it have not helped me as well. I used two versions of firmware for cx25840 that are on ivtvproject site but both are not working ok for me. I have tried two versions of kernel 2.6.25.15 and 2.6.26.5 with ivtv 1.2.0 and ivtv 1.3.0 without any better results. I hoped that forcing pal standard for tda9887 chip described here would help: http://ivtvdriver.org/viewcvs/ivtv/tags/0.6.7/doc/README.tda9887?rev=3817&view=markup But there is no such parameter in this module anymore and passing it to "tuner" module does not help. I have tried options port1, port2 and qss parameters as well and sound detections looks to be faster when I set: tda9887 port1=1 port2=0 qss=1 But described problems still exist. I have been trying to change sound input to another one and back to tv when sound is missing on channel but it changed nothing. Same for stopping and starting audio microcontroller. I am live in Poland (PAL standard) and I have this problems on cable TV. Please tell me anything I should post that would help anyone recognize the problem. I am trying to fix it since a week or so and I would be very glad for any help. Here is my dmesg output: ivtv: Start initialization, version 1.3.0 ivtv0: Initializing card #0 ivtv0: Autodetected Hauppauge card (cx23416 based) ivtv0: Unreasonably low latency timer, setting to 64 (was 32) tveeprom 1-0050: Hauppauge model 26559, rev B257, serial# 7506112 tveeprom 1-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type 38) tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 1-0050: audio processor is CX25843 (idx 37) tveeprom 1-0050: decoder processor is CX25843 (idx 30) tveeprom 1-0050: has radio, has no IR receiver, has no IR transmitter ivtv0: Autodetected Hauppauge WinTV PVR-150 cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0) tda9887 1-0043: creating new instance tda9887 1-0043: tda988[5/6/7] found tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) tuner-simple 1-0061: creating new instance tuner-simple 1-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) firmware: requesting v4l-cx25840.fw speedtch 2-2:1.0: found stage 1 firmware speedtch-1.bin cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) ivtv0: Registered device video0 for encoder MPG (4096 kB) ivtv0: Registered device video32 for encoder YUV (2048 kB) ivtv0: Registered device vbi0 for encoder VBI (1024 kB) ivtv0: Registered device video24 for encoder PCM (320 kB) ivtv0: Registered device radio0 for encoder radio ivtv0: Initialized card #0: Hauppauge WinTV PVR-150 ivtv: End initialization firmware: requesting v4l-cx2341x-enc.fw ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: Encoder revision: 0x02060039 Best regards Krzysztof Kwiatkowski _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
