I have recently upgraded from Mandriva 2008 to 2008.1 and now can't get IVTV working. My kernel is:
2.6.24.7-tmb-desktop-3mdv Here's the output of dmesg ivtv: Start initialization, version 1.2.0 ivtv0: Initializing card #0 ivtv0: Autodetected Hauppauge card (cx23415 based) ivtv0: Unreasonably low latency timer, setting to 64 (was 32) ivtv0: Autodetected Hauppauge WinTV PVR-350 saa7115 2-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) saa7127 2-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) msp3400 2-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0) tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0) tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) ivtv0: Registered device video0 for encoder MPG (4096 kB) ivtv0: Registered device video32 for encoder YUV (2048 kB) ivtv0: Registered device vbi0 for encoder VBI (1024 kB) ivtv0: Registered device video24 for encoder PCM (320 kB) ivtv0: Registered device radio0 for encoder radio ivtv0: Registered device video16 for decoder MPG (1024 kB) ivtv0: Registered device vbi8 for decoder VBI (64 kB) ivtv0: Registered device vbi16 for decoder VOUT ivtv0: Registered device video48 for decoder YUV (1024 kB) ivtv0: Initialized card #0: Hauppauge WinTV PVR-350 ivtv1: Initializing card #1 ivtv1: Autodetected Hauppauge card (cx23415 based) ivtv1: Unreasonably low latency timer, setting to 64 (was 32) ivtv1: Autodetected Hauppauge WinTV PVR-350 saa7115 3-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #1) saa7127 3-0044: saa7129 found @ 0x88 (ivtv i2c driver #1) msp3400 3-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #1) tuner 3-0043: chip found @ 0x86 (ivtv i2c driver #1) tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1) ivtv1: Registered device video1 for encoder MPG (4096 kB) ivtv1: Registered device video33 for encoder YUV (2048 kB) ivtv1: Registered device vbi1 for encoder VBI (1024 kB) ivtv1: Registered device video25 for encoder PCM (320 kB) ivtv1: Registered device radio1 for encoder radio ivtv1: Registered device video17 for decoder MPG (1024 kB) ivtv1: Registered device vbi9 for decoder VBI (64 kB) ivtv1: Registered device vbi17 for decoder VOUT ivtv1: Registered device video49 for decoder YUV (1024 kB) ivtv1: Initialized card #1: Hauppauge WinTV PVR-350 ivtv: End initialization ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02060039 ivtv0: Decoder revision: 0x02020023 ivtv0: Loaded v4l-cx2341x-init.mpg firmware (155648 bytes) ivtv1: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv1: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes) ivtv1: Encoder revision: 0x02060039 ivtv1: Decoder revision: 0x02020023 ivtv1: Loaded v4l-cx2341x-init.mpg firmware (155648 bytes) ivtv1: All encoder MPG stream buffers are full. Dropping data. ivtv1: Cause: the application is not reading fast enough. Note that I have several instances of the error on the last lines. I have tried compiling from scratch and have placed the latest drivers into the appropriate firmware directory /lib/firmware. Any pointers? thx Scott _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
