You are right Rich. I misspelled mmio. Sorry. OK. I ran... sudo modprobe -r cx18 sudo //modprobe cx18 mmio_ndelay=31,61 and 91
Here is the new results from dmesg | grep cx18. Note that the last result of mmio_ndelay=91 gives "FATAL: Module cx18 is in use."... [EMAIL PROTECTED]:~$ sudo modprobe -r cx18 [EMAIL PROTECTED]:~$ sudo modprobe cx18 mmio_ndelay=31 [EMAIL PROTECTED]:~$ dmesg | grep cx18 [ 828.234512] cx18: Start initialization, version 1.0.1 [ 828.234561] cx18-0: Initializing card #0 [ 828.234565] cx18-0: Autodetected Hauppauge card [ 828.234907] cx18-0: Unreasonably low latency timer, setting to 64 (was 32) [ 828.236032] cx18-0: cx23418 revision 01010000 (B) [ 828.318913] cx18-0: Invalid EEPROM [ 828.318915] cx18-0: VBI is not yet supported [ 828.365193] cs5345 2-004c: chip found @ 0x98 (cx18 i2c driver #0-0) [ 828.367391] cx18-0: Disabled encoder IDX device [ 828.367616] cx18-0: Registered device video0 for encoder MPEG (2 MB) [ 828.367736] DVB: registering new adapter (cx18) [ 828.379379] cx18-0: frontend initialization failed [ 828.379533] cx18-0: DVB failed to register [ 828.379558] cx18-0: Registered device video32 for encoder YUV (2 MB) [ 828.379575] cx18-0: Registered device video24 for encoder PCM audio (1 MB) [ 828.379590] cx18-0: Registered device radio0 for encoder radio [ 828.379753] cx18-0: Error -12 registering devices [ 828.381154] cx18-0: Error -12 on initialization [ 828.381182] cx18: probe of 0000:01:06.0 failed with error -12 [ 828.381201] cx18: End initialization [ 995.972056] cx18: Start initialization, version 1.0.1 [ 995.972111] cx18-0: Initializing card #0 [ 995.972114] cx18-0: Autodetected Hauppauge card [ 995.973258] cx18-0: cx23418 revision ffffffff (A) [ 996.117695] cx18-0: Invalid EEPROM [ 996.117698] cx18-0: VBI is not yet supported [ 996.162359] cs5345 2-004c: chip found @ 0x98 (cx18 i2c driver #0-0) [ 996.164625] cx18-0: Disabled encoder IDX device [ 996.164792] cx18-0: Registered device video0 for encoder MPEG (2 MB) [ 996.164906] DVB: registering new adapter (cx18) [ 996.165904] cx18-0: frontend initialization failed [ 996.166184] cx18-0: DVB failed to register [ 996.166296] cx18-0: Registered device video32 for encoder YUV (2 MB) [ 996.166423] cx18-0: Registered device video24 for encoder PCM audio (1 MB) [ 996.166551] cx18-0: Registered device radio0 for encoder radio [ 996.166798] cx18-0: Error -12 registering devices [ 996.168296] cx18-0: Error -12 on initialization [ 996.174179] cx18: probe of 0000:01:06.0 failed with error -12 [ 996.174490] cx18: End initialization [EMAIL PROTECTED]:~$ sudo modprobe -r cx18 [EMAIL PROTECTED]:~$ sudo modprobe cx18 mmio_ndelay=61 [EMAIL PROTECTED]:~$ dmesg | grep cx18 [ 828.234512] cx18: Start initialization, version 1.0.1 [ 828.234561] cx18-0: Initializing card #0 [ 828.234565] cx18-0: Autodetected Hauppauge card [ 828.234907] cx18-0: Unreasonably low latency timer, setting to 64 (was 32) [ 828.236032] cx18-0: cx23418 revision 01010000 (B) [ 828.318913] cx18-0: Invalid EEPROM [ 828.318915] cx18-0: VBI is not yet supported [ 828.365193] cs5345 2-004c: chip found @ 0x98 (cx18 i2c driver #0-0) [ 828.367391] cx18-0: Disabled encoder IDX device [ 828.367616] cx18-0: Registered device video0 for encoder MPEG (2 MB) [ 828.367736] DVB: registering new adapter (cx18) [ 828.379379] cx18-0: frontend initialization failed [ 828.379533] cx18-0: DVB failed to register [ 828.379558] cx18-0: Registered device video32 for encoder YUV (2 MB) [ 828.379575] cx18-0: Registered device video24 for encoder PCM audio (1 MB) [ 828.379590] cx18-0: Registered device radio0 for encoder radio [ 828.379753] cx18-0: Error -12 registering devices [ 828.381154] cx18-0: Error -12 on initialization [ 828.381182] cx18: probe of 0000:01:06.0 failed with error -12 [ 828.381201] cx18: End initialization [ 995.972056] cx18: Start initialization, version 1.0.1 [ 995.972111] cx18-0: Initializing card #0 [ 995.972114] cx18-0: Autodetected Hauppauge card [ 995.973258] cx18-0: cx23418 revision ffffffff (A) [ 996.117695] cx18-0: Invalid EEPROM [ 996.117698] cx18-0: VBI is not yet supported [ 996.162359] cs5345 2-004c: chip found @ 0x98 (cx18 i2c driver #0-0) [ 996.164625] cx18-0: Disabled encoder IDX device [ 996.164792] cx18-0: Registered device video0 for encoder MPEG (2 MB) [ 996.164906] DVB: registering new adapter (cx18) [ 996.165904] cx18-0: frontend initialization failed [ 996.166184] cx18-0: DVB failed to register [ 996.166296] cx18-0: Registered device video32 for encoder YUV (2 MB) [ 996.166423] cx18-0: Registered device video24 for encoder PCM audio (1 MB) [ 996.166551] cx18-0: Registered device radio0 for encoder radio [ 996.166798] cx18-0: Error -12 registering devices [ 996.168296] cx18-0: Error -12 on initialization [ 996.174179] cx18: probe of 0000:01:06.0 failed with error -12 [ 996.174490] cx18: End initialization [ 1010.965409] cx18: Start initialization, version 1.0.1 [ 1010.965463] cx18-0: Initializing card #0 [ 1010.965466] cx18-0: Autodetected Hauppauge card [ 1010.966636] cx18-0: cx23418 revision ffffffff (A) [ 1011.112193] cx18-0: Invalid EEPROM [ 1011.112196] cx18-0: VBI is not yet supported [ 1011.157222] cs5345 2-004c: chip found @ 0x98 (cx18 i2c driver #0-0) [ 1011.159540] cx18-0: Disabled encoder IDX device [ 1011.159668] cx18-0: Registered device video0 for encoder MPEG (2 MB) [ 1011.159781] DVB: registering new adapter (cx18) [ 1011.160801] cx18-0: frontend initialization failed [ 1011.161113] cx18-0: DVB failed to register [ 1011.161223] cx18-0: Registered device video32 for encoder YUV (2 MB) [ 1011.161351] cx18-0: Registered device video24 for encoder PCM audio (1 MB) [ 1011.161506] cx18-0: Registered device radio0 for encoder radio [ 1011.161757] cx18-0: Error -12 registering devices [ 1011.163231] cx18-0: Error -12 on initialization [ 1011.169969] cx18: probe of 0000:01:06.0 failed with error -12 [ 1011.170175] cx18: End initialization [EMAIL PROTECTED]:~$ sudo modprobe -r cx18 [EMAIL PROTECTED]:~$ sudo modprobe cx18 mmio_ndelay=91 [EMAIL PROTECTED]:~$ dmesg | grep cx18 [ 828.234512] cx18: Start initialization, version 1.0.1 [ 828.234561] cx18-0: Initializing card #0 [ 828.234565] cx18-0: Autodetected Hauppauge card [ 828.234907] cx18-0: Unreasonably low latency timer, setting to 64 (was 32) [ 828.236032] cx18-0: cx23418 revision 01010000 (B) [ 828.318913] cx18-0: Invalid EEPROM [ 828.318915] cx18-0: VBI is not yet supported [ 828.365193] cs5345 2-004c: chip found @ 0x98 (cx18 i2c driver #0-0) [ 828.367391] cx18-0: Disabled encoder IDX device [ 828.367616] cx18-0: Registered device video0 for encoder MPEG (2 MB) [ 828.367736] DVB: registering new adapter (cx18) [ 828.379379] cx18-0: frontend initialization failed [ 828.379533] cx18-0: DVB failed to register [ 828.379558] cx18-0: Registered device video32 for encoder YUV (2 MB) [ 828.379575] cx18-0: Registered device video24 for encoder PCM audio (1 MB) [ 828.379590] cx18-0: Registered device radio0 for encoder radio [ 828.379753] cx18-0: Error -12 registering devices [ 828.381154] cx18-0: Error -12 on initialization [ 828.381182] cx18: probe of 0000:01:06.0 failed with error -12 [ 828.381201] cx18: End initialization [ 995.972056] cx18: Start initialization, version 1.0.1 [ 995.972111] cx18-0: Initializing card #0 [ 995.972114] cx18-0: Autodetected Hauppauge card [ 995.973258] cx18-0: cx23418 revision ffffffff (A) [ 996.117695] cx18-0: Invalid EEPROM [ 996.117698] cx18-0: VBI is not yet supported [ 996.162359] cs5345 2-004c: chip found @ 0x98 (cx18 i2c driver #0-0) [ 996.164625] cx18-0: Disabled encoder IDX device [ 996.164792] cx18-0: Registered device video0 for encoder MPEG (2 MB) [ 996.164906] DVB: registering new adapter (cx18) [ 996.165904] cx18-0: frontend initialization failed [ 996.166184] cx18-0: DVB failed to register [ 996.166296] cx18-0: Registered device video32 for encoder YUV (2 MB) [ 996.166423] cx18-0: Registered device video24 for encoder PCM audio (1 MB) [ 996.166551] cx18-0: Registered device radio0 for encoder radio [ 996.166798] cx18-0: Error -12 registering devices [ 996.168296] cx18-0: Error -12 on initialization [ 996.174179] cx18: probe of 0000:01:06.0 failed with error -12 [ 996.174490] cx18: End initialization [ 1010.965409] cx18: Start initialization, version 1.0.1 [ 1010.965463] cx18-0: Initializing card #0 [ 1010.965466] cx18-0: Autodetected Hauppauge card [ 1010.966636] cx18-0: cx23418 revision ffffffff (A) [ 1011.112193] cx18-0: Invalid EEPROM [ 1011.112196] cx18-0: VBI is not yet supported [ 1011.157222] cs5345 2-004c: chip found @ 0x98 (cx18 i2c driver #0-0) [ 1011.159540] cx18-0: Disabled encoder IDX device [ 1011.159668] cx18-0: Registered device video0 for encoder MPEG (2 MB) [ 1011.159781] DVB: registering new adapter (cx18) [ 1011.160801] cx18-0: frontend initialization failed [ 1011.161113] cx18-0: DVB failed to register [ 1011.161223] cx18-0: Registered device video32 for encoder YUV (2 MB) [ 1011.161351] cx18-0: Registered device video24 for encoder PCM audio (1 MB) [ 1011.161506] cx18-0: Registered device radio0 for encoder radio [ 1011.161757] cx18-0: Error -12 registering devices [ 1011.163231] cx18-0: Error -12 on initialization [ 1011.169969] cx18: probe of 0000:01:06.0 failed with error -12 [ 1011.170175] cx18: End initialization [ 1020.684787] cx18: Start initialization, version 1.0.1 [ 1020.684849] cx18-0: Initializing card #0 [ 1020.684853] cx18-0: Autodetected Hauppauge card [ 1020.686204] cx18-0: cx23418 revision ffffffff (A) [ 1020.832048] cx18-0: Invalid EEPROM [ 1020.832050] cx18-0: VBI is not yet supported [ 1020.876499] cs5345 2-004c: chip found @ 0x98 (cx18 i2c driver #0-0) [ 1020.882583] cx18-0: Disabled encoder IDX device [ 1020.882629] cx18-0: Registered device video0 for encoder MPEG (2 MB) [ 1020.882632] DVB: registering new adapter (cx18) [ 1020.886489] cx18-0: frontend initialization failed [ 1020.886585] cx18-0: DVB failed to register [ 1020.886609] cx18-0: Registered device video32 for encoder YUV (2 MB) [ 1020.886625] cx18-0: Registered device video24 for encoder PCM audio (1 MB) [ 1020.886639] cx18-0: Registered device radio0 for encoder radio [ 1020.886804] cx18-0: Error -12 registering devices [ 1020.888188] cx18-0: Error -12 on initialization [ 1020.888391] cx18: probe of 0000:01:06.0 failed with error -12 [ 1020.889199] cx18: End initialization [ 1020.904608] cx18-0: unable to open firmware v4l-cx23418-apu.fw [ 1020.904614] cx18-0: did you put the firmware in the hotplug firmware directory? [ 1020.904640] [<ffffffff8844caab>] :cx18:cx18_writel_retry+0x2b/0x80 [ 1020.904661] Modules linked in: cx18 dvb_core compat_ioctl32 i2c_algo_bit cx2341x tveeprom s5h1409 cs5345 tuner videodev v4l1_compat v4l2_common ipv6 aes_x86_64 aes_generic af_packet rfcomm l2cap bluetooth ppdev powernow_k8 cpufreq_stats cpufreq_conservative cpufreq_ondemand freq_table cpufreq_userspace cpufreq_powersave sbs dock video output sbshc container battery iptable_filter ip_tables x_tables ac lp snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_hwdep evdev snd_seq_dummy arc4 ecb blkcipher snd_seq_oss snd_seq_midi rt61pci rt2x00pci rt2x00lib rfkill input_polldev crc_itu_t snd_rawmidi mac80211 snd_seq_midi_event snd_seq cfg80211 snd_timer snd_seq_device serio_raw eeprom_93cx6 button parport_pc parport snd shpchp k8temp i2c_nforce2 pci_hotplug soundcore psmouse pcspkr i2c_core ext3 jbd mbcache sg sr_mod cdrom sd_mod pata_amd sata_nv pata_acpi ata_generic ohci_hcd ehci_hcd forcedeth libata scsi_mod usbcore thermal processor fan fbcon tileblit font bitblit softcursor fuse [ 1020.904745] RIP: 0010:[<ffffffff8844caab>] [<ffffffff8844caab>] :cx18:cx18_writel_retry+0x2b/0x80 [ 1020.904806] [<ffffffff88440500>] :cx18:cx18_firmware_init+0x730/0xa10 [ 1020.904830] [<ffffffff8843c3cb>] :cx18:cx18_init_on_first_open+0x6b/0x180 [ 1020.904854] [<ffffffff88442813>] :cx18:cx18_v4l2_open+0xa3/0x230 [ 1020.904930] RIP [<ffffffff8844caab>] :cx18:cx18_writel_retry+0x2b/0x80 [EMAIL PROTECTED]:~$ sudo modprobe -r cx18 FATAL: Module cx18 is in use. [EMAIL PROTECTED]:~$ sudo modprobe cx18 mmio_ndelay=91 >/ I ran these commands and this is the result... />/ />/ daryl at daryl-desktop <http://ivtvdriver.org/mailman/listinfo/ivtv-users>:~$ sudo modprobe cx18 mnio_ndelay=31 />/ FATAL: Error inserting cx18 />/ (/lib/modules/2.6.24-21-generic/kernel/drivers/media/video/cx18/cx18.ko): />/ Unknown symbol in module, or unknown parameter (see dmesg). />/ />/ Any ideas? "FATAL" sounds like a bad thing :-) / >Looks like you misspelled mnio_ndelay. I should be mmio_ndelay. >Rich _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
