On Thu, 2008-10-16 at 17:41 +0200, Hans Verkuil wrote:
> On Thursday 16 October 2008 11:09:28 Alexander Pipelka wrote:
> > Hi,
> >
> > I want to capture video streams without any B-Frames
> > in it from a YUAN MPC622 card (ivtv driver).
> >
> > For this I set video_b_frames to 0:
> >
> > v4l2-ctl -c video_b_frames=0
> >
> >
> > After that I won't get any output from /dev/video0.
> >
> > I know this worked with the drivers version 0.7.4.
> >
> > Is this a known issue ?
>
> Works fine for me with ivtv from the v4l-dvb repository (ivtv 1.4.0).
>
> I think it should work fine as well for ivtv 1.1.0 as I don't remember
> any changes in this area since that 1.1.0 version. But to verify that
> you could upgrade to either the 2.6.27 kernel or use the v4l-dvb
> repository.
>
I can confirm what Alexander said:
v4l2-ctl -c video_b_frames=0 (no stream saved, although nothing
appears in the syslog which would
indicate a problem)
v4l2-ctl -c video_b_frames=1 (the stream is saved OK)
All of this with the latest kernel (2.6.27) and a Hauppauge WinTV PVR-150 MCE
(the version without radio tuner but with a MCE remote control).
Levente
PS: BTW it didn't work with ivtv 1.1.0 as well (or was this 0.10.x, it happened
about half a year ago).
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
