On Sun, Oct 19, 2008 at 2:34 PM, FRLinux <[EMAIL PROTECTED]> wrote: > It is a Toshiba Qosmio G40 (my nemesis ...) with Ubuntu Intrepid beta > latest patches. I have also applied the latest BIOS and booted the > laptop with : vmalloc=192M noacpi acpi=off.
Hello, Just wanted to let you know that following the direct use of your online latest code (rather than the one in Ubuntu Intrepid), the new modules detected the card alright but still fails to make it available as a DVB-T device for Linux: [ 4883.263069] cx18: Start initialization, version 1.0.1 [ 4883.263114] cx18-0: Initializing card #0 [ 4883.263117] cx18-0: Autodetected Toshiba Qosmio DVB-T/Analog card [ 4883.263133] cx18 0000:08:09.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 4883.264830] cx18-0: cx23418 revision 01010000 (B) [ 4883.409881] cx18-0: Experimenters and photos needed for device to work well. [ 4883.409882] To help, mail the ivtv-devel list (www.ivtvdriver.org). [ 4883.494091] Chip ID is not zero. It is not a TEA5767 [ 4883.494162] tuner 4-0060: chip found @ 0xc0 (cx18 i2c driver #0-1) [ 4883.494330] xc2028 4-0060: creating new instance [ 4883.494333] xc2028 4-0060: type set to XCeive xc2028/xc3028 tuner [ 4883.494336] firmware: requesting v4l-cx23418-dig.fw [ 4883.692960] cx18-0: loaded v4l-cx23418-dig.fw firmware (16382 bytes) [ 4883.693463] cx18-0: Disabled TS device [ 4883.693465] cx18-0: Disabled encoder YUV device [ 4883.693468] cx18-0: Disabled encoder PCM audio device [ 4883.693469] cx18-0: Disabled encoder IDX device [ 4883.693606] cx18-0: Registered device video1 for encoder MPEG (1 MB) [ 4883.693609] cx18-0: Initialized card #0: Toshiba Qosmio DVB-T/Analog [ 4883.693637] cx18: End initialization [ 4883.701099] firmware: requesting v4l-cx23418-apu.fw [ 4883.831734] cx18-0: loaded v4l-cx23418-apu.fw firmware V00120000 (141200 bytes) [ 4884.328042] firmware: requesting v4l-cx23418-cpu.fw [ 4884.474079] cx18-0: loaded v4l-cx23418-cpu.fw firmware (158332 bytes) [ 4884.479961] cx18-0: FW version: 0.0.74.0 (Release 2007/03/12) [ 4884.676080] firmware: requesting v4l-cx23418-apu.fw [ 4885.304044] firmware: requesting v4l-cx23418-cpu.fw [ 4885.648445] cx18-0 api: CX18_APU_RESETAI [ 4885.648502] cx18-0 api: mailbox error 200800ff for command CX18_APU_RESETAI [ 4885.650282] firmware: requesting xc3028-v27.fw [ 4885.655883] xc2028 4-0060: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [ 4885.664370] xc2028 4-0060: Loading firmware for type=BASE (1), id 0000000000000000. [ 4887.783767] xc2028 4-0060: Loading firmware for type=(0), id 000000000000b700. [ 4887.819424] SCODE (20000000), id 000000000000b700: [ 4887.819431] xc2028 4-0060: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000. [ 4887.859156] xc2028 4-0060: Incorrect readback of firmware version. [ 4887.920038] xc2028 4-0060: Loading firmware for type=BASE (1), id 0000000000000000. [ 4890.315854] xc2028 4-0060: Loading firmware for type=(0), id 000000000000b700. [ 4890.351643] SCODE (20000000), id 000000000000b700: [ 4890.351649] xc2028 4-0060: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000. [ 4890.391041] xc2028 4-0060: Incorrect readback of firmware version. [ 4890.549045] xc2028 4-0060: Loading firmware for type=BASE (1), id 0000000000000000. [ 4892.907888] xc2028 4-0060: Loading firmware for type=(0), id 000000000000b700. [ 4892.943772] SCODE (20000000), id 000000000000b700: [ 4892.943779] xc2028 4-0060: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000. [ 4892.983041] xc2028 4-0060: Incorrect readback of firmware version. [ 4893.044035] xc2028 4-0060: Loading firmware for type=BASE (1), id 0000000000000000. [ 4895.228097] xc2028 4-0060: Loading firmware for type=(0), id 000000000000b700. [ 4895.269820] SCODE (20000000), id 000000000000b700: [ 4895.269831] xc2028 4-0060: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000. [ 4895.307542] xc2028 4-0060: Incorrect readback of firmware version. [ 4895.460032] cx18-0 file: open encoder MPEG [ 4895.460056] cx18-0: VIDIOC_QUERYCAP driver=cx18, card=Toshiba Qosmio DVB-T/Analog, bus=PCI:0000:08:09.0, version=0x00010001, capabilities=0x01030001 [ 4895.460849] cx18-0: VIDIOC_QUERYCAP driver=cx18, card=Toshiba Qosmio DVB-T/Analog, bus=PCI:0000:08:09.0, version=0x00010001, capabilities=0x01030001 [ 4895.460857] cx18-0: VIDIOC_ENUMINPUT index=0, name=Tuner 1, type=1, audioset=3, tuner=0, std=00001000, status=0 [ 4895.460862] cx18-0: VIDIOC_ENUMINPUT index=1, name=S-Video 1, type=2, audioset=3, tuner=0, std=00ffffff, status=0 [ 4895.460866] cx18-0: VIDIOC_ENUMINPUT index=2, name=Composite 1, type=2, audioset=3, tuner=0, std=00ffffff, status=0 [ 4895.460871] cx18-0: VIDIOC_ENUMINPUT error -22 [ 4895.460875] cx18-0: VIDIOC_ENUM_FMT index=0, type=1, flags=0, pixelformat=HM12, description='HM12 (YUV 4:1:1)' [ 4895.460879] cx18-0: VIDIOC_TRY_FMT type=vid-cap [ 4895.460885] cx18-0: width=720, height=480, format=MPEG, field=interlaced, bytesperline=0 sizeimage=131072, colorspace=1 [ 4895.461376] cx18-0 ioctl: close() of encoder MPEG Cheers, Steph _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
