Hi all, I have a Linux system with two tuner cards (Pinnacle PCTV 800i for ATSC/HD and a PVR-150 for analog cable). The 800i works perfectly with MythTV; the problem is that after a minute of recording on the 150, the video and audio drastically speed up. I notice this even using cat /dev/video1 > test.mpg. I searched the mailing list and found some stuff talking about the 350, but I don't use the module they talked about.
Distro used: Debian lenny Kernel version: 2.6.27 (compiled; not a kernel package) IVTV version: 1.4.0--using the modules that came with the kernel I used Relevant dmesg output: Linux video capture interface: v2.00 ivtv: Start initialization, version 1.4.0 ivtv0: Initializing card #0 ivtv0: Autodetected Hauppauge card (cx23416 based) ivtv 0000:02:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 tveeprom 2-0050: Hauppauge model 26552, rev B268, serial# 7953126 tveeprom 2-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47) tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 2-0050: audio processor is CX25843 (idx 37) tveeprom 2-0050: decoder processor is CX25843 (idx 30) tveeprom 2-0050: has radio ivtv0: Autodetected Hauppauge WinTV PVR-150 cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0) tda9887 2-0043: creating new instance tda9887 2-0043: tda988[5/6/7] found tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0) tuner-simple 2-0061: creating new instance tuner-simple 2-0061: type set to 47 (LG NTSC (TAPE series)) firmware: requesting v4l-cx25840.fw cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes) ivtv0: Registered device video1 for encoder MPG (4096 kB) ivtv0: Registered device video32 for encoder YUV (2048 kB) ivtv0: Registered device vbi1 for encoder VBI (1024 kB) ivtv0: Registered device video24 for encoder PCM (320 kB) ivtv0: Registered device radio0 for encoder radio ivtv0: Initialized card #0: Hauppauge WinTV PVR-150 ivtv: End initialization firmware: requesting v4l-cx2341x-enc.fw ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: Encoder revision: 0x02060039 Any help would definitely be appreciated. Thanks, -Mooneer _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
