Hi,
If i set frequency for optimal video, I get no sound:
ivtv-tune -d/dev/video0 -f317.650
If I set frequency a little low, I get sound but a
noisy image:
ivtv-tune -d/dev/video0 -f317.050
I am using pal-n as standard, ivtv version 1.3.0,
kernel 2.6.26 and WinTV PVR 350.
Is there something I can do?
Thanks,
Gabriel
This is relevant output of dmesg:
------------------------------------------------------------------------------------------
ivtv0: Initializing card #0
ivtv0: Autodetected Hauppauge card (cx23415 based)
ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 17 (level, low) -> IRQ 17
tveeprom 0-0050: Hauppauge model 48139, rev K2B7, serial# 9904507
tveeprom 0-0050: tuner model is Philips FM1216ME MK5 (idx 117, type 38)
tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K)
(eeprom 0x74)
tveeprom 0-0050: audio processor is MSP4418 (idx 25)
tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter
ivtv0: Autodetected Hauppauge WinTV PVR-350
saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
msp3400 0-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c driver #0)
msp3400 0-0040: msp3400 supports nicam and radio, mode is autodetect
and autoselect
tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0)
tda9887 0-0043: creating new instance
tda9887 0-0043: tda988[5/6/7] found
tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
tuner-simple 0-0061: creating new instance
tuner-simple 0-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
ivtv0: Registered device video0 for encoder MPG (4096 kB)
ivtv0: Registered device video32 for encoder YUV (2048 kB)
ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
ivtv0: Registered device video24 for encoder PCM (320 kB)
ivtv0: Registered device radio0 for encoder radio
ivtv0: Registered device video16 for decoder MPG (1024 kB)
ivtv0: Registered device vbi8 for decoder VBI (64 kB)
ivtv0: Registered device vbi16 for decoder VOUT
ivtv0: Registered device video48 for decoder YUV (1024 kB)
ivtv0: Initialized card #0: Hauppauge WinTV PVR-350
ivtv: End initialization
firmware: requesting v4l-cx2341x-enc.fw
ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
firmware: requesting v4l-cx2341x-dec.fw
ivtv0: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02060039
ivtv0: Decoder revision: 0x02020023
firmware: requesting v4l-cx2341x-init.mpg
ivtv0: Loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
-----------------------------------------------------------------------------------------------------------
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
