I have been testing the HVR 1600 mostly using mythtv, 1 recording had hyperfast audio playback and I am also noticing intermittent skips in audio, silence for about a 1 second.
Is this currently common behaviour? I noticed this in my dmesg : [ 3087.476431] cx18-0: Cannot find buffer 33 for stream encoder MPEG [ 3087.476442] cx18-0: Could not find buf 33 for stream encoder MPEG dmesg|grep cx18 [ 11.159274] cx18: Start initialization, version 1.0.2 [ 11.159324] cx18-0: Initializing card #0 [ 11.159329] cx18-0: Autodetected Hauppauge card [ 11.159727] cx18 0000:01:08.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 11.159737] cx18-0: Unreasonably low latency timer, setting to 64 (was 32) [ 11.162638] cx18-0: cx23418 revision 01010000 (B) [ 11.420693] cx18-0: Autodetected Hauppauge HVR-1600 [ 11.420695] cx18-0: VBI is not yet supported [ 11.624599] tuner 3-0061: chip found @ 0xc2 (cx18 i2c driver #0-1) [ 11.624647] cs5345 2-004c: chip found @ 0x98 (cx18 i2c driver #0-0) [ 12.833874] cx18-0: Disabled encoder IDX device [ 12.834026] cx18-0: Registered device video0 for encoder MPEG (2 MB) [ 12.834030] DVB: registering new adapter (cx18) [ 13.494761] cx18-0: DVB Frontend registered [ 13.494825] cx18-0: Registered device video32 for encoder YUV (2 MB) [ 13.494882] cx18-0: Registered device video24 for encoder PCM audio (1 MB) [ 13.494886] cx18-0: Initialized card #0: Hauppauge HVR-1600 [ 13.495451] cx18: End initialization [ 33.337294] cx18-0: loaded v4l-cx23418-apu.fw firmware V00120000 (141200 bytes) [ 33.951668] cx18-0: loaded v4l-cx23418-cpu.fw firmware (158332 bytes) [ 33.957827] cx18-0: FW version: 0.0.74.0 (Release 2007/03/12) [ 35.319069] cx18-0: loaded v4l-cx23418-dig.fw firmware (16382 bytes)
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
