For a totally retarded idea, I'd try unplugging the computer, remove the card, remove the battery, let it sit for a few and then putting the battery back in, putting the card back in and the plugging it in to see what happens. I use the PVR-150 with Ubuntu 8.04 - the ivtv stuff works really well, and so many ways to exploit /dev/video0.
Good luck, Mark F. Kaufman ________________________________ From: Scott Bickford <[EMAIL PROTECTED]> To: User discussion about IVTV <[email protected]> Sent: Sunday, December 7, 2008 8:27:27 PM Subject: [ivtv-users] symptoms of dead PVR-350? Using Mythdora 5 with PVR-350. I accidentally reset circuit breaker that the computer lives on so the computer was turned off. During boot, udev hangs and doesn't do anything for around 15 minutes. I eventually gave up. Removing the PVR-350 the system boots ok. current dmesg with pvr-350 removed: ivtv: Start initialization, version 1.2.0 ivtv: End initialization ivtvfb: no cards found<6>bttv: driver version 0.9.17 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture cx88/0: cx2388x v4l2 driver version 0.0.6 loaded This is ivtv messages with the PVR-350 in the box: Dec 7 20:10:11 core2 kernel: ivtv: Start initialization, version 1.2.0 Dec 7 20:10:11 core2 kernel: ivtv0: Initializing card #0 Dec 7 20:10:11 core2 kernel: ivtv0: Autodetected Hauppauge card (cx23415 based) Dec 7 20:10:11 core2 kernel: ivtv0: Unreasonably low latency timer, setting to 64 (was 32) Dec 7 20:10:11 core2 kernel: ivtv0: Autodetected Hauppauge WinTV PVR-350 Dec 7 20:10:11 core2 kernel: saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) Dec 7 20:10:11 core2 kernel: saa7127 1-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) Dec 7 20:10:11 core2 kernel: msp3400 1-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0) Dec 7 20:10:11 core2 kernel: tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0) Dec 7 20:10:11 core2 kernel: tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) Dec 7 20:10:11 core2 kernel: ivtv0: Registered device video0 for encoder MPG (16384 kB) Dec 7 20:10:11 core2 kernel: ivtv0: Registered device video32 for encoder YUV (32768 kB) Dec 7 20:10:11 core2 kernel: ivtv0: Registered device vbi0 for encoder VBI (16384 kB) Dec 7 20:10:11 core2 kernel: ivtv0: Registered device video24 for encoder PCM (16 kB) Dec 7 20:10:11 core2 kernel: ivtv0: Registered device radio0 for encoder radio Dec 7 20:10:11 core2 kernel: ivtv0: Registered device video16 for decoder MPG (1024 kB) Dec 7 20:10:11 core2 kernel: ivtv0: Registered device vbi8 for decoder VBI (64 kB) Dec 7 20:10:11 core2 kernel: ivtv0: Registered device vbi16 for decoder VOUT Dec 7 20:10:11 core2 kernel: ivtv0: Registered device video48 for decoder YUV (1024 kB) Dec 7 20:10:11 core2 kernel: ivtv0: Initialized card #0: Hauppauge WinTV PVR-350 Dec 7 20:10:11 core2 kernel: ivtv: End initialization Dec 7 20:10:11 core2 kernel: ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) Dec 7 20:10:11 core2 kernel: ivtv0: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes) Dec 7 20:10:11 core2 kernel: ivtv0: Encoder revision: 0x02060039 Dec 7 20:10:11 core2 kernel: ivtv0: Decoder revision: 0x02020023 Dec 7 20:10:11 core2 kernel: ivtv0: Loaded v4l-cx2341x-init.mpg firmware (155648 bytes) Dec 7 20:10:11 core2 kernel: ivtvfb0: Framebuffer at 0xd1510000, mapped to 0xf9810000, size 1665k Dec 7 20:10:11 core2 kernel: ivtvfb0: Framebuffer registered on ivtv card id 0 Dec 7 20:10:11 core2 kernel: ivtvfb0: Framebuffer registered on ivtv card id 0 Dec 7 20:10:11 core2 kernel: NET: Registered protocol family 10 Dec 7 20:10:11 core2 kernel: lo: Disabled Privacy Extensions Dec 7 20:10:11 core2 kernel: EXT3 FS on dm-0, internal journal Dec 7 20:10:11 core2 kernel: kjournald starting. Commit interval 5 seconds Dec 7 20:10:11 core2 kernel: EXT3 FS on dm-1, internal journal Dec 7 20:10:11 core2 kernel: EXT3-fs: mounted filesystem with ordered data mode. Dec 7 20:10:11 core2 kernel: kjournald starting. Commit interval 5 seconds Dec 7 20:10:11 core2 kernel: EXT3 FS on sda1, internal journal Dec 7 20:10:11 core2 kernel: EXT3-fs: mounted filesystem with ordered data mode. Dec 7 20:10:11 core2 kernel: kjournald starting. Commit interval 5 seconds Dec 7 20:10:11 core2 kernel: EXT3 FS on sda3, internal journal Dec 7 20:10:11 core2 kernel: EXT3-fs: mounted filesystem with ordered data mode. Dec 7 20:10:11 core2 kernel: Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol02. Priority:-1 extents:1 across:2031608k Dec 7 20:10:11 core2 kernel: IA-32 Microcode Update Driver: v1.14a <[EMAIL PROTECTED]> Dec 7 20:10:11 core2 kernel: warning: process `kudzu' used the deprecated sysctl system call with 1.23. Dec 7 20:10:11 core2 kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team Dec 7 20:10:11 core2 kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max) Dec 7 20:10:11 core2 kernel: r8169: eth0: link up Dec 7 20:10:11 core2 kernel: r8169: eth0: link up Dec 7 20:10:11 core2 kernel: RPC: Registered udp transport module. Dec 7 20:10:11 core2 kernel: RPC: Registered tcp transport module. Dec 7 20:10:11 core2 kernel: warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use) Dec 7 20:10:13 core2 ntpd[1906]: ntpd [EMAIL PROTECTED] Mon Sep 24 14:40:07 UTC 2007 (1) Dec 7 20:10:13 core2 ntpd[1907]: precision = 1.000 usec I hope to try it in a windows machine when I can get one. I don't see ivtv loading in the above. What else can I try?
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
