Hello,
I have problems with my pvr350, which served me error-free since december 2005: since today, the remote control isn't working anymore: it seems not to be detected anymore by lsinput: r...@syth:/tmp# lsinput /dev/input/event0 bustype : BUS_HOST vendor : 0x0 product : 0x2 version : 0 name : "Power Button (FF)" phys : "LNXPWRBN/button/input0" bits ev : EV_SYN EV_KEY /dev/input/event1 bustype : BUS_HOST vendor : 0x0 product : 0x1 version : 0 name : "Power Button (CM)" phys : "PNP0C0C/button/input0" bits ev : EV_SYN EV_KEY /dev/input/event2 bustype : BUS_ISA vendor : 0x1f product : 0x1 version : 256 name : "PC Speaker" phys : "isa0061/input0" bits ev : EV_SYN EV_SND Also the lines Feb 15 12:11:56 syth kernel: [ 19.265142] input: i2c IR (Hauppauge) as /class/input/input3 Feb 15 12:11:56 syth kernel: [ 19.292049] ir-kbd-i2c: i2c IR (Hauppauge) detected at i2c-2/2-0018/ir0 [ivtv i2c driver #0] don't appear anymore in /var/log/messages. However, ivtv still detects the pvr350 errorfree (as far as I know ;-) : remark the "has radio, has IR receiver" line): Feb 24 20:23:10 syth kernel: [ 9.829151] ivtv: Start initialization, version 1.3.0 Feb 24 20:23:10 syth kernel: [ 9.829288] ivtv0: Initializing card #0 Feb 24 20:23:10 syth kernel: [ 9.829338] ivtv0: Autodetected Hauppauge card (cx23415 based) Feb 24 20:23:10 syth kernel: [ 9.836449] ivtv0 info: base addr: 0xe8000000 Feb 24 20:23:10 syth kernel: [ 9.836503] ivtv0 info: Enabling pci device Feb 24 20:23:10 syth kernel: [ 9.836837] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19 Feb 24 20:23:10 syth kernel: [ 9.836895] ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKB] -> GSI 19 (level, low) -> IRQ 19 Feb 24 20:23:10 syth kernel: [ 9.837024] ivtv0 info: Bus Mastering Enabled. Feb 24 20:23:10 syth kernel: [ 9.837077] ivtv0 info: 2051 (rev 1) at 02:07.0, irq: 19, latency: 64, memory: 0xe8000000 Feb 24 20:23:10 syth kernel: [ 9.837149] ivtv0 info: attempting ioremap at 0xe8000000 len 0x00800000 Feb 24 20:23:10 syth kernel: [ 9.837586] ivtv0 info: attempting ioremap at 0xe9000000 len 0x00800000 Feb 24 20:23:10 syth kernel: [ 9.838030] ivtv0 info: attempting ioremap at 0xea000000 len 0x00010000 Feb 24 20:23:10 syth kernel: [ 9.838088] ivtv0 info: activating i2c... Feb 24 20:23:10 syth kernel: [ 9.838174] ivtv0 info: Active card count: 1. Feb 24 20:23:10 syth kernel: [ 9.886739] tveeprom 2-0050: Hauppauge model 48139, rev K257, serial# 8105117 Feb 24 20:23:10 syth kernel: [ 9.886795] tveeprom 2-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type 38) Feb 24 20:23:10 syth kernel: [ 9.886865] tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) Feb 24 20:23:10 syth kernel: [ 9.886937] tveeprom 2-0050: audio processor is MSP4418 (idx 25) Feb 24 20:23:10 syth kernel: [ 9.886990] tveeprom 2-0050: decoder processor is SAA7115 (idx 19) Feb 24 20:23:10 syth kernel: [ 9.887043] tveeprom 2-0050: has radio, has IR receiver, has no IR transmitter Feb 24 20:23:10 syth kernel: [ 9.887113] ivtv0: Autodetected Hauppauge WinTV PVR-350 Feb 24 20:23:10 syth kernel: [ 9.887164] ivtv0 info: PAL tuner detected Feb 24 20:23:10 syth kernel: [ 9.957101] ivtv0 info: Loaded module tuner Feb 24 20:23:10 syth kernel: [ 9.968702] ivtv0 info: Loaded module saa7115 Feb 24 20:23:10 syth kernel: [ 10.028861] ivtv0 info: Loaded module saa7127 Feb 24 20:23:10 syth kernel: [ 10.045732] ivtv0 info: Loaded module msp3400 Feb 24 20:23:10 syth kernel: [ 10.066604] saa7115 2-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) Feb 24 20:23:10 syth kernel: [ 10.216107] saa7127 2-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) Feb 24 20:23:10 syth kernel: [ 10.225757] msp3400 2-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c driver #0) Feb 24 20:23:10 syth kernel: [ 10.225811] msp3400 2-0040: msp3400 supports nicam and radio, mode is autodetect and autoselect Feb 24 20:23:10 syth kernel: [ 10.291314] tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0) Feb 24 20:23:10 syth kernel: [ 10.320633] tda9887 2-0043: creating new instance Feb 24 20:23:10 syth kernel: [ 10.320689] tda9887 2-0043: tda988[5/6/7] found Feb 24 20:23:10 syth kernel: [ 10.321942] tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) Feb 24 20:23:10 syth kernel: [ 10.369297] tuner-simple 2-0061: creating new instance Feb 24 20:23:10 syth kernel: [ 10.369354] tuner-simple 2-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) Feb 24 20:23:10 syth kernel: [ 10.380696] ivtv0 info: Allocate DMA encoder MPG stream: 128 x 32768 buffers (4096kB total) Feb 24 20:23:10 syth kernel: [ 10.380896] ivtv0 info: Allocate DMA encoder YUV stream: 64 x 32768 buffers (2048kB total) Feb 24 20:23:10 syth kernel: [ 10.381029] ivtv0 info: Allocate DMA encoder VBI stream: 41 x 26208 buffers (1049kB total) Feb 24 20:23:10 syth kernel: [ 10.381135] ivtv0 info: Allocate DMA encoder PCM stream: 72 x 4608 buffers (324kB total) Feb 24 20:23:10 syth kernel: [ 10.381260] ivtv0 info: Allocate DMA decoder MPG stream: 16 x 65536 buffers (1024kB total) Feb 24 20:23:10 syth kernel: [ 10.381353] ivtv0 info: Allocate decoder VBI stream: 29 x 2304 buffers (65kB total) Feb 24 20:23:10 syth kernel: [ 10.381442] ivtv0 info: Allocate DMA decoder YUV stream: 16 x 65536 buffers (1024kB total) Feb 24 20:23:10 syth kernel: [ 10.381565] ivtv0: Registered device video0 for encoder MPG (4096 kB) Feb 24 20:23:10 syth kernel: [ 10.381632] ivtv0: Registered device video32 for encoder YUV (2048 kB) Feb 24 20:23:10 syth kernel: [ 10.381697] ivtv0: Registered device vbi0 for encoder VBI (1024 kB) Feb 24 20:23:10 syth kernel: [ 10.381762] ivtv0: Registered device video24 for encoder PCM (320 kB) Feb 24 20:23:10 syth kernel: [ 10.381827] ivtv0: Registered device radio0 for encoder radio Feb 24 20:23:10 syth kernel: [ 10.381893] ivtv0: Registered device video16 for decoder MPG (1024 kB) Feb 24 20:23:10 syth kernel: [ 10.381958] ivtv0: Registered device vbi8 for decoder VBI (64 kB) Feb 24 20:23:10 syth kernel: [ 10.382022] ivtv0: Registered device vbi16 for decoder VOUT Feb 24 20:23:10 syth kernel: [ 10.382087] ivtv0: Registered device video48 for decoder YUV (1024 kB) Feb 24 20:23:10 syth kernel: [ 10.382140] ivtv0: Initialized card #0: Hauppauge WinTV PVR-350 (didn't paste the initialization messages for the pvr500 which is also present on the same system). My system is a debian testing: r...@syth:/tmp# uname -a Linux syth 2.6.26-1-686 #1 SMP Sat Jan 10 18:29:31 UTC 2009 i686 GNU/Linux I didn't change anything recently to the system. Why is ir suddenly not detected/working anymore? Is the card dying? BTW: recording is still working error free. Thanks in advance for any tips!
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
