I have an intermittent problem with my hvr1600 which has been happening with higher frequency. Whenever I cat the device I receive only garbage (as reported by the file command). Sometimes when I load the module with different debug options I can get it to work but recently that hasn't been working for me either.
I am using cx18 v1.0.4 and ivtv v1.4.0 I have attached the dmesg output after doing: modprobe cx18 debug=127 ivtv-tune -c 3 -d /dev/hvr1600 (I use udev to rename the card to hvr1600) cat /dev/hvr1600 > /tmp/file.mpg (Ctrl-C after about 2 seconds) ivtv-tune -c 3 -d /dev/hvr1600 cat /dev/hvr1600 > /tmp/file2.mpg (Ctrl-C after about 2 seconds) modprobe -r cx18 file /tmp/file.mpg: data file /tmp/file2.mpg: Dyalog APL component file version 170 .1 I'm not sure where to look or what to tweak and would greatly appreciate any assistance. Let me know if you need more information. General system info: Fedora 10 (Mythdora 10.21 with fedora repos enabled and updated against) v4l-dvb tip as of Feb 18, 2009 uname -a: Linux 2.6.27.19-170.2.35.fc10.x86_64 #1 SMP Mon Feb 23 13:00:23 EST 2009 x86_64 x86_64 x86_64 GNU/Linux Thanks, -josh
dmesg.bz2
Description: BZip2 compressed data
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
