Originally posted a long description of my problems here: http://www.gossamer-threads.com/lists/mythtv/users/380947#380947 What it boils down to first of all is the Hauppauge HVR-1600 model 74591 supported by the cx18 driver?
I'm really starting to think that this different model # is the key to my problems since I have: tveeprom 1-0050: Hauppauge model 74591, rev C1A4, serial# and everything I've found online has been like this one: tveeprom 5-0050: Hauppauge model 74041, rev C6B2, serial# xxxxxxx Here's a more complete dump of my dmesg (note that my system has a working PVR-500 card as well: Linux video capture interface: v2.00 ivtv: Start initialization, version 1.4.1 ivtv0: Initializing card 0 ivtv0: Autodetected Hauppauge card (cx23416 based) ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18 ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKB] -> GSI 18 (level, low) -> IRQ 18 tveeprom 0-0050: Hauppauge model 23552, rev D492, serial# tveeprom 0-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57) tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 0-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 0-0050: audio processor is CX25843 (idx 37) tveeprom 0-0050: decoder processor is CX25843 (idx 30) tveeprom 0-0050: has radio ivtv0: Autodetected WinTV PVR 500 (unit #1) cx18: Start initialization, version 1.1.0 cx18-0: Initializing card 0 cx18-0: Autodetected Hauppauge card ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 17 ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [LNKA] -> GSI 17 (level, low) -> IRQ 17 cx18-0: cx23418 revision 01010000 (B) cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) lirc_dev: lirc_register_plugin: sample_rate: 0 lirc_mceusb2[2]: Philips eHome Infrared Transceiver on usb1:2 usbcore: registered new interface driver lirc_mceusb2 tveeprom 1-0050: Hauppauge model 74591, rev C1A4, serial# tveeprom 1-0050: MAC address is 00-0D-FE-19-B8-32 tveeprom 1-0050: tuner model is TCL MNM05-4 (idx 104, type 4) tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 1-0050: audio processor is CX23418 (idx 38) tveeprom 1-0050: decoder processor is CX23418 (idx 31) tveeprom 1-0050: has no radio cx18-0: Autodetected Hauppauge HVR-1600 cx18-0: tveeprom cannot autodetect tuner!<6>cx18-0: Simultaneous Digital and Analog TV capture supported > The previous two lines seem to contradict each other. What's happening > here? tuner 0-0060: chip found @ 0xc0 (ivtv i2c driver #0) tea5767 0-0060: type set to Philips TEA5767HN FM Radio tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0) tda9887 0-0043: creating new instance tda9887 0-0043: tda988[5/6/7] found ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LAZA] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:09.0 to 64 tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) tuner 2-0043: chip found @ 0x86 (cx18 i2c driver #0-1) tda9887 2-0043: creating new instance tda9887 2-0043: tda988[5/6/7] found wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... tuner 2-0061: chip found @ 0xc2 (cx18 i2c driver #0-1) cs5345 1-004c: chip found @ 0x98 (cx18 i2c driver #0-0) cx18-0: Registered device video0 for encoder MPEG (64 x 32 kB) DVB: registering new adapter (cx18) tuner-simple 0-0061: creating new instance tuner-simple 0-0061: type set to 57 (Philips FQ1236A MK4) ivtv0: Registered device video1 for encoder MPG (4096 kB) ivtv0: Registered device video33 for encoder YUV (2048 kB) ivtv0: Registered device vbi1 for encoder VBI (1024 kB) ivtv0: Registered device video25 for encoder PCM (320 kB) ivtv0: Registered device radio1 for encoder radio ivtv0: Initialized card: WinTV PVR 500 (unit #1) ivtv1: Initializing card 1 ivtv1: Autodetected Hauppauge card (cx23416 based) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 16 ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKC] -> GSI 16 (level, low) -> IRQ 16 tveeprom 3-0050: Hauppauge model 23552, rev D492, serial# tveeprom 3-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57) tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 3-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 3-0050: audio processor is CX25843 (idx 37) tveeprom 3-0050: decoder processor is CX25843 (idx 30) tveeprom 3-0050: has radio ivtv1: Correcting tveeprom data: no radio present on second unit ivtv1: Autodetected WinTV PVR 500 (unit #2) cx25840 3-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) tuner 3-0043: chip found @ 0x86 (ivtv i2c driver #1) tda9887 3-0043: creating new instance tda9887 3-0043: tda988[5/6/7] found tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1) wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #1) MXL5005S: Attached at address 0x63 DVB: registering adapter 0 frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)... cx18-0: DVB Frontend registered cx18-0: Registered DVB adapter0 for TS (32 x 32 kB) cx18-0: Registered device video32 for encoder YUV (16 x 128 kB) cx18-0: Registered device vbi0 for encoder VBI (20 x 51984 bytes) cx18-0: Registered device video24 for encoder PCM audio (256 x 4 kB) cx18-0: Initialized card: Hauppauge HVR-1600 tuner-simple 3-0061: creating new instance tuner-simple 3-0061: type set to 57 (Philips FQ1236A MK4) ivtv1: Registered device video2 for encoder MPG (4096 kB) ivtv1: Registered device video34 for encoder YUV (2048 kB) ivtv1: Registered device vbi2 for encoder VBI (1024 kB) ivtv1: Registered device video26 for encoder PCM (320 kB) ivtv1: Initialized card: WinTV PVR 500 (unit #2) ivtv: End initialization cx18: End initialization thanks!
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
