On Sat, May 2, 2009 at 10:35 PM, Brian Fertig <[email protected]> wrote: > Well tried to build a custom 2.6.23.2 kernel.. Failed miserably due to the > fact I couldnt get my NAT to work. If anyone knows where I could possibly > get a 2.6.20+ Kernel version. Currently I am using 2.6.18-128.1.6 RPM from > CentOS 5.3. I have installed ivtv-0.10.6 w/o issue. Driver seems to work. > > Here is the debug I get from dmesg. > > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.10.6 (tagged release) loading > ivtv: Linux version: 2.6.18-128.1.6.el5 SMP mod_unload 686 REGPARM 4KSTACKS > gcc-4.1 > ivtv: In case of problems please include the debug info between > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > ivtv: any module options, when mailing the ivtv-users mailinglist. > ivtv0: Autodetected Hauppauge card (cx23416 based) > ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 16 (level, low) -> IRQ 201 > ivtv0: Unreasonably low latency timer, setting to 64 (was 32) > ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) > ivtv0: Encoder revision: 0x02060039 > tveeprom 1-0050: Hauppauge model 26032, rev C199, serial# 8297123 > tveeprom 1-0050: tuner model is TCL 2002N 5H (idx 99, type 50) > tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08) > tveeprom 1-0050: audio processor is CX25841 (idx 35) > tveeprom 1-0050: decoder processor is CX25841 (idx 28) > tveeprom 1-0050: has no radio, has IR remote > ivtv0: Autodetected Hauppauge WinTV PVR-150 > ivtv0: reopen i2c bus for IR-blaster support > tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) > cx25840 1-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0) > cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) > wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) > ivtv0: Registered device video0 for encoder MPEG (4 MB) > ivtv0: Registered device video32 for encoder YUV (2 MB) > ivtv0: Registered device vbi0 for encoder VBI (1 MB) > ivtv0: Registered device video24 for encoder PCM audio (1 MB) > tuner 1-0061: type set to 50 (TCL 2002N) > ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 > ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 209 > PCI: Setting latency timer of device 0000:00:11.5 to 64 > ivtv: ==================== END INIT IVTV ==================== > > > I have ran the debug of cat /dev/video0 > /tmp/test.mpg and found it wasnt > producing anything. >
>From the wiki. ivtv-0.10.6 is for kernels >= 2.6.18 and <= 2.6.21.x, This may be your problem. http://ivtvdriver.org/index.php/Download John _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
