Once you set the input to svideo, just use /dev/videoX (where X is your device number, starts with 0) to get the combined mpeg stream.
Tom ----- Original Message ----- From: [email protected] <[email protected]> To: User discussion about IVTV <[email protected]> Sent: Mon Nov 16 17:46:22 2009 Subject: [ivtv-users] S-video; how to get audio? Hello, we'd like to use the S-video input to get the best image quality from the VHS player into the Hauppauge PVR-500MCE. Apparently we need the RCA audio inputs as well, but I would appreciate some help in understanding how to combine the S-video and audio into a usable file using MythTV or any other software. I'm not even sure what device is processing the audio stream; is it /dev/video24? Thanks. Linux video capture interface: v2.00 ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.10.6 (tagged release) loading ivtv: Linux version: 2.6.18-164.el5 SMP mod_unload 686 REGPARM 4KSTACKS gcc-4.1 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge card (cx23416 based) ACPI: PCI Interrupt 0000:04:08.0[A] -> GSI 18 (level, low) -> IRQ 209 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1f.5 to 64 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 intel8x0_measure_ac97_clock: measured 51797 usecs intel8x0: clocking to 48000 ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: Encoder revision: 0x02060039 tveeprom 0-0050: Hauppauge model 23552, rev D587, serial# 8897780 tveeprom 0-0050: tuner model is Samsung TCPN 2121P30A (idx 87, type 70) tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 0-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 0-0050: audio processor is CX25843 (idx 37) tveeprom 0-0050: decoder processor is CX25843 (idx 30) tveeprom 0-0050: has radio, has no IR remote ivtv0: Autodetected WinTV PVR 500 (unit #1) tuner 0-0060: TEA5767 detected. tuner 0-0060: chip found @ 0xc0 (ivtv i2c driver #0) tuner 0-0060: type set to 62 (Philips TEA5767HN FM Radio) tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes) wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: Registered device video0 for encoder MPEG (4 MB) ivtv0: Registered device video32 for encoder YUV (2 MB) ivtv0: Registered device vbi0 for encoder VBI (1 MB) ivtv0: Registered device video24 for encoder PCM audio (1 MB) ivtv0: Registered device radio0 for encoder radio tuner 0-0061: type set to 70 (Samsung TCPN 2121P30A) ivtv0: Initialized WinTV PVR 500 (unit #1), card #0 ivtv: ====================== NEXT CARD ====================== ivtv1: Autodetected Hauppauge card (cx23416 based) ACPI: PCI Interrupt 0000:04:09.0[A] -> GSI 19 (level, low) -> IRQ 185 ivtv1: Unreasonably low latency timer, setting to 64 (was 32) ivtv1: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv1: Encoder revision: 0x02060039 tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1) cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1) tveeprom 1-0050: Hauppauge model 23552, rev D587, serial# 8897780 tveeprom 1-0050: tuner model is Samsung TCPN 2121P30A (idx 87, type 70) tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 1-0050: audio processor is CX25843 (idx 37) tveeprom 1-0050: decoder processor is CX25843 (idx 30) tveeprom 1-0050: has radio, has no IR remote ivtv1: Correcting tveeprom data: no radio present on second unit ivtv1: Autodetected WinTV PVR 500 (unit #2) ivtv1: Registered device video1 for encoder MPEG (4 MB) ivtv1: Registered device video33 for encoder YUV (2 MB) ivtv1: Registered device vbi1 for encoder VBI (1 MB) ivtv1: Registered device video25 for encoder PCM audio (1 MB) tuner 1-0061: type set to 70 (Samsung TCPN 2121P30A) ivtv1: Initialized WinTV PVR 500 (unit #2), card #1 ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
