That's correct. The card is connected to a ClearQAM cable source.
The cable is split once between the wall and the tuner card. There is about
15ft of cable to the wall and I live on the 4th floor. I wouldn't have guessed
that signal strength would be my problem, as it seems to work OK in Windows or
if I plug the cable into the QAM tuner on my TV. Does 0145 seem like a
reasonable number for signal strength or SNR? I'm not sure how to translate
that into % or dB...
> Date: Fri, 12 Feb 2010 16:44:25 -0500
> From: [email protected]
> To: [email protected]
> Subject: Re: [ivtv-users] hvr-1600, frame CRC mismatch - incomplete frame
>
> On Fri, Feb 12, 2010 at 4:26 PM, Kyle Lil <[email protected]> wrote:
> > Thanks, Devin. Below is the output of azap. I'm assuming that the errors are
> > occurring at the same time the video/audio glitches would be. I think it is
> > slightly worse on some channels than on others (but not drastically). The
> > example below is from one of the worse channels.
>
> Yeah, it looks like you do occasionally get a BER/UNC error (despite
> the SNR appearing to be stable). I wonder what is up with that.
>
> I'll have to see if I can find some cycles to see if I can reproduce
> the issue here.
>
> Just to be clear, we're talking about ClearQAM right? (and not OTA ATSC)
>
> Devin
>
> --
> Devin J. Heitmueller - Kernel Labs
> http://www.kernellabs.com
>
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
_________________________________________________________________
Your E-mail and More On-the-Go. Get Windows Live Hotmail Free.
http://clk.atdmt.com/GBL/go/201469229/direct/01/_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
