Hi,

openSUSE 11.2 x86_64, ivtv info:

dmesg | grep ivtv
[    5.305243] ivtv: Start initialization, version 1.4.1
[    5.306355] ivtv0: Initializing card 0
[    5.306362] ivtv0: Autodetected Hauppauge card (cx23416 based)
[    5.306889] ivtv 0000:01:09.0: PCI INT A -> Link[APC2] -> GSI 17
(level, low) -> IRQ 17
[    5.307155] ivtv i2c driver #0: Test OK
[    5.378746] ivtv0: Autodetected Hauppauge WinTV PVR-150
[    5.407062] cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
[    5.650445] tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
[    5.661851] tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
[    5.680768] wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
[    5.700874] IRQ 17/ivtv0: IRQF_DISABLED is not guaranteed on shared IRQs
[    5.701443] ivtv0: Registered device video0 for encoder MPG (4096 kB)
[    5.701474] ivtv0: Registered device video32 for encoder YUV (2048 kB)
[    5.701502] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
[    5.701530] ivtv0: Registered device video24 for encoder PCM (320 kB)
[    5.701556] ivtv0: Registered device radio0 for encoder radio
[    5.701559] ivtv0: Initialized card: Hauppauge WinTV PVR-150
[    5.701611] ivtv: End initialization
[    6.323024] ivtv 0000:01:09.0: firmware: requesting v4l-cx2341x-enc.fw
[    6.347640] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
[    6.547135] ivtv0: Encoder revision: 0x02060039


I have two PVR 150 cards. Both exhibit the same problem. I have tried
both antenna, and composite, inputs. Both exhibit the same problem.....

Things are working pretty well. I'm capturing video from old VHS and
camcorder tapes. EXCEPT I get these glitches every now and then in the
video that looks like a hsync loss. If I watch these same glitchty
sections of the tapes on a regular old TV (hooked up to the VCR), there
is NO glitch. NO sign of any trouble with the video. It seems to occur
as the camera moves rapidly.

I have a sample clip here that shows what happens:
http://forceway.com/samm/cap1_short.mpg

Any settings I can change or anything? Help!
thanks,
-john

_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to