I'm now running into some more fun, I don't seem to be connecting correctly with the lircd daemon, I have downloaded the "firmware" from http://www.blushingpenguin.com/mark/lmilk/haup-ir-blaster.bin and put Mike's lircd.conf for the blaster in, I get numerous errors when I run lircd -n -d /dev/lirc(0 or 1) of the type: lircd-0.8.6[13604]: error in configfile line 30924: lircd-0.8.6[13604]: "2195390500" is out of range lircd-0.8.6[13604]: error in configfile line 30926: lircd-0.8.6[13604]: "2195390501" is out of range lircd-0.8.6[13604]: error in configfile line 30928: lircd-0.8.6[13604]: "2195390502" is out of range lircd-0.8.6[13604]: error in configfile line 30930: lircd-0.8.6[13604]: "2195390505" is out of range lircd-0.8.6[13604]: error in configfile line 30932: lircd-0.8.6[13604]: "2195390511" is out of range lircd-0.8.6[13604]: error in configfile line 30934: lircd-0.8.6[13604]: "2195390512" is out of range lircd-0.8.6[13604]: error in configfile line 30936: lircd-0.8.6[13604]: "2195390513" is out of range lircd-0.8.6[13604]: error in configfile line 30938: lircd-0.8.6[13604]: "2195390514" is out of range lircd-0.8.6[13604]: error in configfile line 30940: lircd-0.8.6[13604]: "2195390515" is out of range lircd-0.8.6[13604]: error in configfile line 30942: lircd-0.8.6[13604]: "2195390541" is out of range lircd-0.8.6[13604]: error in configfile line 30944: lircd-0.8.6[13604]: "2195390542" is out of range and then it ends: lircd-0.8.6[13604]: lircd(default) ready, using /var/run/lirc/lircd
I have the feeling that everything in the lircd.conf has been essentially thrown out. When I load the lirc_zilog module with debug=1, I get indications in dmesg that the hauppauge remote is being received, but irw doesn't output anything I do note that the lirc package installed from ubuntu's repositories doesn't list the zilog remote as a valid remote (when I type lircd --device=help, it lists everything else), but from what I can tell, that shouldn't necessarily be a problem, others are working with an unpatched lirc install, while using the patched lirc-modules-source package. Jarod if you're on this list, or anybody else who can point me in the right direction, PLEASE, there must be an easier way! Thanks James _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
