I am new to this forum i searched in the list found same topic as iam facing same problem
here is my setup tvheadend installed and working but when i record channel iam seeing always black and white here is the log any help will be great Ram v4l2-ctl --log-status Status Log: [24749.103223] ivtv0: ================= START STATUS CARD #0 ================= [24749.103228] ivtv0: Version: 1.4.1 Card: Hauppauge WinTV PVR-150 [24749.155813] tveeprom 1-0050: Hauppauge model 26559, rev F089, serial# 10169053 [24749.155816] tveeprom 1-0050: tuner model is TCL MFPE05 2 (idx 89, type 38) [24749.155818] tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) [24749.155820] tveeprom 1-0050: audio processor is CX25843 (idx 37) [24749.155823] tveeprom 1-0050: decoder processor is CX25843 (idx 30) [24749.155824] tveeprom 1-0050: has radio [24749.155830] ivtv0: GPIO status: DIR=0xdf01 OUT=0x26f3 IN=0x37f1 [24749.159012] cx25840 1-0044: Video signal: present [24749.159014] cx25840 1-0044: Detected format: PAL-BDGHI [24749.159016] cx25840 1-0044: Specified standard: PAL-BDGHI [24749.159018] cx25840 1-0044: Specified video input: Composite 7 [24749.159020] cx25840 1-0044: Specified audioclock freq: 48000 Hz [24749.166435] cx25840 1-0044: Detected audio mode: mono [24749.166437] cx25840 1-0044: Detected audio standard: A2-BG [24749.166439] cx25840 1-0044: Audio muted: no [24749.166441] cx25840 1-0044: Audio microcontroller: running [24749.166443] cx25840 1-0044: Configured audio standard: automatic detection [24749.166445] cx25840 1-0044: Configured audio system: automatic standard and mode detection [24749.166447] cx25840 1-0044: Specified audio input: Tuner (In8) [24749.166449] cx25840 1-0044: Preferred audio mode: stereo [24749.166451] cx25840 1-0044: Selected 65 MHz format: system DK [24749.166453] cx25840 1-0044: Selected 45 MHz format: chroma [24749.166456] tda9887 1-0043: Data bytes: b=0x14 c=0x6e e=0x49 [24749.166459] tuner 1-0061: Tuner mode: analog TV [24749.166461] tuner 1-0061: Frequency: 161.00 MHz [24749.166462] tuner 1-0061: Standard: 0x000000ff [24749.166464] wm8775 1-001b: Input: 2 [24749.166467] ivtv0: Video Input: Tuner 1 [24749.166468] ivtv0: Audio Input: Tuner 1 [24749.166469] ivtv0: Tuner: TV [24749.166472] ivtv0: Stream: MPEG-2 Program Stream [24749.166475] ivtv0: VBI Format: No VBI [24749.166477] ivtv0: Video: 720x576, 25 fps [24749.166479] ivtv0: Video: MPEG-2, 4x3, Variable Bitrate, 6000000, Peak 8000000 [24749.166481] ivtv0: Video: GOP Size 12, 2 B-Frames, GOP Closure [24749.166484] ivtv0: Audio: 48 kHz, MPEG-1/2 Layer II, 224 kbps, Stereo, No Emphasis, No CRC [24749.166487] ivtv0: Spatial Filter: Manual, Luma 1D Horizontal, Chroma 1D Horizontal, 0 [24749.166489] ivtv0: Temporal Filter: Manual, 8 [24749.166491] ivtv0: Median Filter: Off, Luma [0, 255], Chroma [0, 255] [24749.166493] ivtv0: Status flags: 0x00200000 [24749.166495] ivtv0: Stream encoder MPG: status 0x0118, 3% of 4096 KiB (128 buffers) in use [24749.166497] ivtv0: Stream encoder YUV: status 0x0000, 0% of 2048 KiB (64 buffers) in use [24749.166500] ivtv0: Stream encoder VBI: status 0x0000, 0% of 1049 KiB (41 buffers) in use [24749.166502] ivtv0: Stream encoder PCM: status 0x0000, 0% of 324 KiB (72 buffers) in use [24749.166504] ivtv0: Read MPG/VBI: 45969344/0 bytes [24749.166505] ivtv0: ================== END STATUS CARD #0 ==================
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
