On Fri, 2010-05-07 at 09:20 -0400, Scott Bickford wrote:
> I'm on new Mythdora 12.23 (Fedora 12) and MythTv .23. Besides the
> HVR-1600, I have an HD-PVR. I am not using or setup the HD-PVR
> blaster.
>
> I got the remote working by doing these steps here
> http://mythdora.com/?q=node/5272
>
> The remote response is pretty slow on MD. It works ok with my other
> STBs and Tv.
>
> I tried turning off my USB ports so the HD-PVR was not in use. This
> did not seem to help.
>
> I can do irw and see the key presses come across ok, but the response
> is slow or even non-existent (have to press like three times before it
> appears).
>
> uname -a
>
> Linux localhost.localdomain 2.6.32.11-99.fc12.x86_64 #1 SMP Mon Apr 5
> 19:59:38 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux
>
>
> [r...@localhost firmware]# lsmod
> Module Size Used by
> lirc_zilog 13790 3
> ir_kbd_i2c 5487 0
> lirc_i2c 5851 0
> lirc_dev 15858 2 lirc_zilog,lirc_i2c
Please test with only one of the following loaded:
lirc_zilog
lirc_i2c
ir_kbd_i2c
All three of these will try to bind to the Zilog Z8F0811 IR
microcontroller on the HVR-1600 and poll for key codes. Only the first
one of these modules loaded should bind, when more than one is loaded.
For the sake of eliminating variables however, please test with only one
loaded at a time.
There was a period when the kernel's internal I2C binding model changed.
The cx18 driver and ir-kbd-i2c were keep in sync (mostly) during this
change. However, LIRC, being out of kernel, would have been left out in
the cold at the time. Jarrod probably has fixed things with LIRC by
now.
I would suspect ir-kbd-i2c will work for you.
If lirc_i2c or lirc_zilog do not work at all, I would suggest you need
an updated set of LIRC modules.
Regards,
Andy
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
