[Ivtv-users] PVR-350 problem with FC3

[Pastor Doug Coats]

I am using FC3 and trying to get Mythtv using Wilson's instructions.  I am not sure if anyone has gotten ivtv to work with FC3 yet for TV output.  If you have please help me out. 

 

I am using Kernel: 2.6.10-1.766_FC3
I am using ivtv version: ivtv-0.2.0-64_rc3f.rhfc3.at

When I put the ivtv commands in the modprobe.conf file it does not load ivtv at all.  So I moved them to the rc.local file.

 

Ivtv commands in rc.local:

 

# ivtv modules setup
alias char-major-81 videodev
alias char-major-81-0 ivtv
alias tveeprom tveeprom-ivtv
install ivtv /sbin/modprobe --ignore-install ivtv; /sbin/modprobe ivtv-fb

Here is the output in the messages log:

 

Feb 24 19:47:05 media1 kernel: Linux video capture interface: v1.00
Feb 24 19:47:05 media1 kernel: ivtv: no version for "struct_module" found: kerne
l tainted.
Feb 24 19:47:06 media1 kernel: ivtv: ==================== START INIT IVTV ======
==============
Feb 24 19:47:06 media1 kernel: ivtv: version 0.2.0 (rc3e) loading
Feb 24 19:47:06 media1 kernel: ivtv: Linux version: 2.6.10-1.766_FC3 686 REGPARM
 4KSTACKS gcc-3.4
Feb 24 19:47:06 media1 kernel: ivtv: In case of problems please include the debu
g info
Feb 24 19:47:06 media1 kernel: ivtv: between the START INIT IVTV and END INIT IV
TV lines when
Feb 24 19:47:06 media1 kernel: ivtv: mailing the ivtv-devel mailinglist.
Feb 24 19:47:06 media1 kernel: ivtv: Autodetected WinTV PVR 350 card
Feb 24 19:47:06 media1 kernel: ivtv: Found an iTVC15 based chip
Feb 24 19:47:06 media1 kernel: PCI: Found IRQ 5 for device 0000:00:12.0
Feb 24 19:47:06 media1 kernel: ivtv: Unreasonably low latency timer, setting to
64 (was 32)
Feb 24 19:47:06 media1 kernel: ivtv: VIA PCI device: 0x0305 vendor: 0x1106
Feb 24 19:47:06 media1 kernel: ivtv: Failed to load module tveeprom
Feb 24 19:47:06 media1 kernel: ivtv: i2c client addr: 0x50 not found!
Feb 24 19:47:06 media1 kernel: ivtv: Error -19 reading Hauppauge eeprom.
Feb 24 19:47:06 media1 kernel: ivtv: Possible causes: the tveeprom module was no
t loaded, or
Feb 24 19:47:06 media1 kernel: ivtv: the eeprom kernel module was loaded before
the tveeprom module.
Feb 24 19:47:06 media1 kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c d
river #0
Feb 24 19:47:06 media1 kernel: ivtv: i2c attach [client=(tuner unset),ok]
Feb 24 19:47:07 media1 kernel: saa7115: starting probe for adapter SMBus Via Pro
 adapter at 5000 (0x0)
Feb 24 19:47:07 media1 kernel: saa7115: starting probe for adapter ivtv i2c driv
er #0 (0x10005)
Feb 24 19:47:07 media1 kernel: saa7115: detecting saa7115 client on address 0x42
Feb 24 19:47:07 media1 kernel: saa7115: writing init values
Feb 24 19:47:07 media1 kernel: ivtv: i2c attach [client=saa7115[0],ok]
Feb 24 19:47:07 media1 kernel: saa7115: status: (1E) 0x48, (1F) 0xc0
Feb 24 19:47:07 media1 kernel: saa7127: video encoder driver version V 0.3 loade
d
Feb 24 19:47:07 media1 kernel: saa7127: Selecting NTSC video Standard
Feb 24 19:47:07 media1 kernel: saa7127: Selecting S-Video+Composite
Feb 24 19:47:07 media1 kernel: saa7127: Turn WSS off
Feb 24 19:47:07 media1 kernel: saa7127: Widescreen Mode 4:3 Full Format
Feb 24 19:47:07 media1 kernel: saa7127: Selecting Normal Encoder Input
Feb 24 19:47:07 media1 kernel: saa7127: Enable Video Output
Feb 24 19:47:07 media1 kernel: ivtv: i2c attach [client=saa7127[0],ok]
Feb 24 19:47:07 media1 kernel: msp34xx: init: chip=MSP3448W-A2 +nicam +simple +s
impler +radio mode=simple
Feb 24 19:47:07 media1 kernel: ivtv: i2c attach [client=MSP3448W-A2,ok]
Feb 24 19:47:07 media1 kernel: msp3410: daemon started
Feb 24 19:47:08 media1 kernel: ivtv: Encoder revision: 0x02040024
Feb 24 19:47:08 media1 kernel: ivtv: Encoder Firmware is buggy, use version 0x02
040011
Feb 24 19:47:08 media1 kernel: ivtv: Decoder revision: 0x02020023
Feb 24 19:47:08 media1 kernel: ivtv: Configuring WinTV PVR 350 card with 9 strea
ms
Feb 24 19:47:08 media1 kernel: ivtv: Create DMA stream 0 using 256 16384 byte bu
ffers  4194304 kbytes total
Feb 24 19:47:08 media1 kernel: ivtv: Registered v4l2 device, streamtype 0 minor
0
Feb 24 19:47:08 media1 kernel: ivtv: Create DMA stream 1
Feb 24 19:47:08 media1 kernel: ivtv: Registered v4l2 device, streamtype 1 minor
32
Feb 24 19:47:08 media1 kernel: ivtv: Create stream 2 using 40 52224 byte buffers
Feb 24 19:47:08 media1 kernel: ivtv: Registered v4l2 device, streamtype 2 minor 224
Feb 24 19:47:08 media1 kernel: ivtv: Create DMA stream 3 using 455 4608 byte buffers  2097152 kbytes total
Feb 24 19:47:08 media1 kernel: ivtv: Registered v4l2 device, streamtype 3 minor 24
Feb 24 19:47:08 media1 kernel: ivtv: Create stream 4
Feb 24 19:47:08 media1 kernel: ivtv: Registered v4l2 device, streamtype 4 minor 64
Feb 24 19:47:08 media1 kernel: ivtv: Create DMA stream 5 using 16 65536 byte buffers  1048576 kbytes total
Feb 24 19:47:08 media1 kernel: ivtv: Registered v4l2 device, streamtype 5 minor 16
Feb 24 19:47:08 media1 kernel: ivtv: Create stream 6 using 1024 2048 byte buffers  262144 kbytes total
Feb 24 19:47:08 media1 kernel: ivtv: Registered v4l2 device, streamtype 6 minor 228
Feb 24 19:47:08 media1 kernel: ivtv: Create stream 7
Feb 24 19:47:08 media1 kernel: ivtv: Registered v4l2 device, streamtype 7 minor 232
Feb 24 19:47:08 media1 kernel: ivtv: Create DMA stream 8
Feb 24 19:47:08 media1 kernel: ivtv: Registered v4l2 device, streamtype 8 minor 48
Feb 24 19:47:08 media1 kernel: ivtv: Could not detect tuner standard, defaulting to NTSC.
Feb 24 19:47:08 media1 kernel: tuner: tuner type not set
Feb 24 19:47:08 media1 kernel: ivtv: Setting audio matrix to input 3, output 1
Feb 24 19:47:08 media1 kernel: ivtv: Switching standard to NTSC.
Feb 24 19:47:08 media1 kernel: tuner: tuner type not set
Feb 24 19:47:08 media1 kernel: saa7115: decoder set norm NTSC
Feb 24 19:47:08 media1 kernel: saa7115: set audio: 0x01
Feb 24 19:47:08 media1 kernel: saa7127: Setting Encoder Video Standard
Feb 24 19:47:08 media1 kernel: saa7127: Set NTSC Video Mode
Feb 24 19:47:08 media1 kernel: saa7127: Selecting NTSC video Standard
Feb 24 19:47:08 media1 kernel: ivtv: ivtv_enc_thread: pid = 4704, itv = 0xe8e5b020
Feb 24 19:47:08 media1 kernel: ivtv: ivtv_dec_thread: pid = 4705, itv = 0xe8e5b020
Feb 24 19:47:08 media1 kernel: ivtv: Initialized WinTV PVR 350, card #0
Feb 24 19:47:08 media1 kernel: ivtv: ====================  END INIT IVTV  ====================

Thanks for any help.

 

Doug Coats