Hi,
The Live TV streams stops working, the devel list seems to be
non-functional, and i can't find a bugzilla , so ill just report the
problems in here:
saa7115: decoder disable output
saa7115: decoder enable output
saa7115: decoder disable output
saa7115: decoder enable output
saa7115: decoder disable output
saa7115: decoder enable output
ivtv: 1000 ms time out waiting for firmware
ivtv: Failed api call 0x000000d2 with result 0xfffffff0
ivtv: 1000 ms time out waiting for firmware
ivtv: Failed api call 0x000000d2 with result 0xfffffff0
saa7115: decoder disable output
saa7115: decoder enable output
ivtv: 1000 ms time out waiting for firmware
ivtv: Failed api call 0x000000d2 with result 0xfffffff0
ivtv: Timeout waiting for data! Encoder buffers have 0x00000000 bytes
trans_id = 61085.
ivtv: Check digitizer Sync
saa7115: status: 0x91
ivtv: Trying to restart capture.
ivtv: 1000 ms time out waiting for firmware
ivtv: Failed api call 0x00000082 with result 0xfffffff0
ivtv: ENC: Failed stopping capture -16
ivtv: 1000 ms time out waiting for firmware
ivtv: Failed api call 0x000000d5 with result 0xfffffff0
ivtv: ENC: Failed to stop VIMevent notification -16
ivtv: No Free Mailbox for cmd 0x000000c6 after 100 tries!
ivtv: Mailbox[0] 0x000000d3 flags 0x00000003
ivtv: Mailbox[1] 0x000000d3 flags 0x00000003
ivtv: Mailbox[2] 0x000000dc flags 0x00000003
ivtv: Firmware UNRESPONSIVE when trying cmd 0x000000c6!!!
ivtv: 1000 ms time out waiting for firmware
ivtv: Failed api call 0x000000d2 with result 0xfffffff0
saa7115: decoder disable output
saa7115: decoder enable output
ivtv: 1000 ms time out waiting for firmware
ivtv: Failed api call 0x000000d2 with result 0xfffffff0
ivtv: No Free Mailbox for cmd 0x000000c7 after 100 tries!
ivtv: Mailbox[0] 0x000000d3 flags 0x00000003
ivtv: Mailbox[1] 0x000000c9 flags 0x00000003
ivtv: Mailbox[2] 0x000000d6 flags 0x00000003
ivtv: Firmware UNRESPONSIVE when trying cmd 0x000000c7!!!
ivtv: No Free Mailbox for cmd 0x00000091 after 100 tries!
ivtv: Mailbox[0] 0x000000b9 flags 0x00000003
ivtv: Mailbox[1] 0x000000bb flags 0x00000003
ivtv: Mailbox[2] 0x0000008f flags 0x00000003
ivtv: Firmware UNRESPONSIVE when trying cmd 0x00000091!!!
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.4 (f) loading
ivtv: Linux version: 2.6.12-rc4 gcc-3.4
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 350 card
ivtv: Found an iTVC15 based chip
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: XXX PCI device: 0x00e1 vendor: 0x10de
tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 7596706
tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom =
0x74, v4l2 = 0x00400e17)
tveeprom: audio_processor = CS5331 (type = 9)
ivtv: i2c attach [client=tveeprom[50],ok]
ivtv: Tuner Type 38, Tuner formats 0x00400e17, Radio: yes, Model
0x00ad2557, Revision 0x00000001
ivtv: PAL tuner detected
ivtv: SECAM tuner detected
ivtv: Radio detected
tuner: Ignoring new-style parameters in presence of obsolete ones
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
saa7115: starting probe for adapter ISA main adapter (0x0)
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[50],ok]
saa7115: status: (1E) 0x00, (1F) 0xc0
saa7127: Ignoring new-style parameters in presence of obsolete ones
saa7127: video encoder driver version V 0.3 loaded
saa7127: detecting saa7127 client on address 0x88
saa7127: Selecting NTSC video Standard
saa7127: Selecting S-Video+Composite
saa7127: Turn WSS off
saa7127: Widescreen Mode 4:3 Full Format
saa7127: Selecting Normal Encoder Input
saa7127: Enable Video Output
ivtv: i2c attach [client=saa7127[50],ok]
msp34xx: ivtv version
msp34xx: init: chip=MSP3418W-B3, has NICAM support, simple (D) mode,
simpler (G) no-thread mode
msp34xx: $Id$ compiled on: May 8 2005 19:53:50
ivtv: i2c attach [client=MSP3418W-B3,ok]
ivtv: Encoder revision: 0x02050032
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 350 card with 10 streams
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create DMA stream 1 using 20 103680 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 2 using 40 52224 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 5 minor 16
ivtv: Create DMA stream 5 using 16 65536 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 6 minor 228
ivtv: Create DMA stream 6 using 14563 144 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 7 minor 232
ivtv: Create stream 7
ivtv: Registered v4l2 device, streamtype 8 minor 48
ivtv: Create DMA stream 8 using 20 103680 byte buffers 0 kbytes total
ivtv: Create DMA stream 9 using 32 65536 byte buffers 0 kbytes total
ivtv: Setting Tuner 38
tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv
i2c driver #0
saa7115: decoder set input (4)
saa7115: now setting Composite input
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to PAL.
ivtv: ivtv_enc_thread: pid = 14872, itv = 0xffffffff88036020
ivtv: ivtv_dec_thread: pid = 14873, itv = 0xffffffff88036020
saa7115: decoder set norm PAL
saa7115: set audio: 0x01
saa7127: Setting Encoder Video Standard
saa7127: Set PAL Video Mode
saa7127: Selecting PAL video Standard
ivtv: Initialized WinTV PVR 350, card #0
ivtv: ==================== END INIT IVTV ====================
and this means that I have to reboot the machine :(
Its impossible to have the livetv stream running for more than 1 - maybe
2 hours if im lucky - without it completly freeze and needing a reboot.
If there is anything I can do - test or submit more info that can help
in solving this problem let me know.
Thanks.
--
nuno alexandre
''Non-free programs are dangerous to you and to your community.
Don't let them get a place in your life.'' -- RMS
-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes
Want to be the first software developer in space?
Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_id=7393&alloc_id=16281&op=click
_______________________________________________
Ivtv-users mailing list
Ivtv-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ivtv-users
