Hi, I have installed version 0.3.7g of the drivers, to use with my new PVR150. The image and tuner work great, but I can't get any sound. I'm using a PAL broadcast.
Here's the logs corresponding to the loading of the drivers: Aug 21 17:21:00 localhost kernel: cx25840: Ignoring new-style parameters in presence of obsolete ones Aug 21 17:21:00 localhost kernel: ivtv: version 0.3.7 (g) loading Aug 21 17:21:00 localhost kernel: ivtv: Linux version: 2.6.8-2-386 preempt 386 gcc-3.3 Aug 21 17:21:00 localhost kernel: ivtv: In case of problems please include the debug info Aug 21 17:21:00 localhost kernel: ivtv: between the START INIT IVTV and END INIT IVTV lines when Aug 21 17:21:00 localhost kernel: ivtv: mailing the ivtv-devel mailinglist. Aug 21 17:21:00 localhost kernel: ivtv: Autodetected WinTV PVR 150 card (iTVC16 based) Aug 21 17:21:00 localhost kernel: ACPI: PCI interrupt 0000:00:14.0[A] -> GSI 5 (level, low) -> IRQ 5 Aug 21 17:21:00 localhost kernel: ivtv: Unreasonably low latency timer, setting to 64 (was 32) Aug 21 17:21:00 localhost kernel: cx25840: firmware read failed Aug 21 17:21:00 localhost kernel: ivtv: i2c attach to card #0 ok [client=cx25840[50], addr=44] Aug 21 17:21:00 localhost kernel: tveeprom: Ignoring new-style parameters in presence of obsolete ones Aug 21 17:21:00 localhost kernel: tveeprom: The eeprom says no radio is present, but the tuner type Aug 21 17:21:00 localhost kernel: tveeprom: indicates otherwise. I will assume that radio is present. Aug 21 17:21:00 localhost kernel: tveeprom: Hauppauge: model = 26559, rev = B260, serial# = 2924703 Aug 21 17:21:00 localhost kernel: tveeprom: tuner = LG S001D MK3 (idx = 60, type = 38) Aug 21 17:21:00 localhost kernel: tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) Aug 21 17:21:00 localhost kernel: tveeprom: audio_processor = MSP3410D (type = 5) Aug 21 17:21:00 localhost kernel: ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50] Aug 21 17:21:00 localhost kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 Aug 21 17:21:00 localhost kernel: ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61] Aug 21 17:21:00 localhost kernel: wm8775: Ignoring new-style parameters in presence of obsolete ones Aug 21 17:21:00 localhost kernel: ivtv: i2c attach to card #0 ok [client=wm8775[50], addr=1b] Aug 21 17:21:00 localhost kernel: tda9885/6/7: chip found @ 0x86 Aug 21 17:21:00 localhost kernel: ivtv: i2c attach to card #0 ok [client=tda9887, addr=43] Aug 21 17:21:00 localhost kernel: ivtv: Encoder revision: 0x02050032 Aug 21 17:21:00 localhost kernel: ivtv warning: Encoder Firmware can be buggy, use version 0x02040011!!!! Aug 21 17:21:00 localhost kernel: ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) Aug 21 17:21:00 localhost kernel: ivtv: Create DMA encoder YUV stream: 0 x 12960 buffers (0KB total) Aug 21 17:21:00 localhost kernel: ivtv: Create DMA encoder VBI stream: 0 x 12740 buffers (0KB total) Aug 21 17:21:00 localhost kernel: ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) Aug 21 17:21:00 localhost kernel: ivtv: Create encoder radio stream Aug 21 17:21:00 localhost kernel: tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c driver #0 Aug 21 17:21:00 localhost kernel: ivtv: Initialized WinTV PVR 150, card #0 Any idea on how to solve this? Thanks, Johan. ------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf _______________________________________________ Ivtv-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/ivtv-users
