Hey all,
I just bought a PVR150 and using the 0.3.7k drivers it is autodetected
as a PVR250. This machine also has a PVR350; however, that is detected
just fine.
This is the" lspci -vv output" for the PVR150:
01:04.0 Multimedia video controller: Internext Compression Inc iTVC16
(CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc.: Unknown device 0003
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (32000ns min, 2000ns max), Cache Line Size 08
Interrupt: pin A routed to IRQ 5
Region 0: Memory at f8000000 (32-bit, prefetchable)
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Here is the "dmesg | grep ivtv" output that relates to the PVR150:
ivtv: Autodetected WinTV PVR 250 card (iTVC16 based)
ivtv: i2c attach to card #1 ok [client=tveeprom[50], addr=50]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1
ivtv: i2c attach to card #1 ok [client=(tuner unset), addr=61]
ivtv: Encoder revision: 0x02050032
ivtv warning: Encoder Firmware can be buggy, use version 0x02040011!!!!
ivtv: Allocate DMA encoder MPEG stream: 256 x 32768 buffers (8192KB total)
ivtv: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
total)
ivtv warning: i2c client addr: 0x21 not found for command 0x40046403!
ivtv warning: i2c client addr: 0x21 not found for command 0x40046404!
ivtv warning: i2c client addr: 0x40 not found for command 0x40086d11!
ivtv warning: i2c client addr: 0x40 not found for command 0x80287610!
ivtv warning: i2c client addr: 0x40 not found for command 0x40287611!
ivtv warning: i2c client addr: 0x40 not found for command 0x40307603!
ivtv warning: i2c client addr: 0x21 not found for command 0x40046403!
ivtv warning: i2c client addr: 0x40 not found for command 0x80287610!
ivtv warning: i2c client addr: 0x40 not found for command 0x40287611!
ivtv warning: i2c client addr: 0x21 not found for command 0x40046406!
ivtv warning: i2c client addr: 0x40 not found for command 0x4004760f!
ivtv warning: i2c client addr: 0x21 not found for command 0x40046406!
ivtv warning: i2c client addr: 0x40 not found for command 0x80287610!
ivtv warning: i2c client addr: 0x40 not found for command 0x40287611!
ivtv: Initialized WinTV PVR 250, card #1
Manually setting cardtype to 6 makes it work properly.
If there is any other information you need, please just let me know.
Jeff
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
Ivtv-users mailing list
Ivtv-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ivtv-users
