Hi all, I've been searching google, the IVTV Wiki, and the ivtv users & devel mailing list archives trying to find a solution to my problem, but so far I haven't had any luck. I'm hoping some kind soul on this list may have an idea :-)
My box has a PVR 350 running Slackware 10.1 (kernel 2.4.29). I've compiled ivtv v0.2.0-rc3k without any problems. I've populated my /etc/modules.conf with what seems to be a fairly standard set of information (see below), and when I execute `modprobe ivtv` everything seems to work fine, except for one nagging message showing up in dmesg: tuner: tuner type not set When I do the test capture (cat /dev/video0 > ~/test.mpg) I get nothing but static, even while simultaneously changing channels in ptune-ui.pl. I have all of the frequency table, standards, etc. settings set correctly (I've seen this same card work properly before under KnoppMyth), but still I only see static. This leads me to believe the problem is related to the tuner message from dmesg above. Below is the contents of my /etc/modules.conf and the IVTV section of my dmesg output. Any help is very much appreciated :-) Thanks in advance, Russ /etc/modules.conf ================= alias char-major-61 lirc_i2c alias char-major-81 videodev alias char-major-81-0 ivtv options ivtv ivtv_debug=1 tuner=47 options tuner type=47 options msp3400 once=1 simple=1 add below ivtv msp3400 saa7115 saa7127 tuner add above ivtv lirc_dev lirc_i2c dmesg IVTV output ================= Linux video capture interface: v1.00 i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-algo-bit.o: i2c bit algorithm module i2c-core.o: driver i2c TV tuner driver registered. saa7127: video encoder driver version V 0.3 loaded i2c-core.o: driver saa7127 registered. i2c-core.o: driver saa7115 registered. i2c-core.o: driver i2c msp3400 driver registered. ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.2.0 (rc3j) loading ivtv: Linux version: 2.4.29 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 350 card ivtv: Found an iTVC15 based chip ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: XXX PCI device: 0x2560 vendor: 0x8086 tuner: chip found @ 0xc2 ivtv: i2c attach [client=(tuner unset),ok] i2c-core.o: client [(tuner unset)] registered to adapter [ivtv i2c driver #0](pos. 0). saa7127: detecting saa7127 client on address 0x88 saa7127: Selecting NTSC video Standard saa7127: Selecting S-Video+Composite saa7127: Turn WSS off saa7127: Widescreen Mode 4:3 Full Format saa7127: Selecting Normal Encoder Input saa7127: Enable Video Output ivtv: i2c attach [client=saa7127,ok] i2c-core.o: client [saa7127] registered to adapter [ivtv i2c driver #0](pos. 1). saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) saa7115: detecting saa7115 client on address 0x42 saa7115: writing init values ivtv: i2c attach [client=saa7115,ok] i2c-core.o: client [saa7115] registered to adapter [ivtv i2c driver #0](pos. 2). saa7115: status: (1E) 0x48, (1F) 0xc0 msp34xx: ivtv version msp34xx: init: chip=MSP3448W-A2, has NICAM support, simple (D) mode, simpler (G) no-thread mode msp34xx: $Id$ compiled on: Sep 13 2005 19:39:20 ivtv: i2c attach [client=MSP3448W-A2,ok] i2c-core.o: client [MSP3448W-A2] registered to adapter [ivtv i2c driver #0](pos. 3). i2c-core.o: adapter ivtv i2c driver #0 registered as adapter 0. i2c-core.o: driver tveeprom registered. tveeprom: Hauppauge: model = 48132, rev = K268, serial# = 7852874 tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio_processor = MSP3440 (type = 11) ivtv: i2c attach [client=tveeprom,ok] i2c-core.o: client [tveeprom] registered to adapter [ivtv i2c driver #0](pos. 4). ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model 0x00ad2598, Revision 0x00000001 ivtv: NTSC tuner detected ivtv: Radio detected ivtv: Encoder revision: 0x02050032 ivtv: Encoder Firmware may be buggy, use version 0x02040011 ivtv: Decoder revision: 0x02020023 ivtv: Configuring WinTV PVR 350 card with 9 streams ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total ivtv: Registered v4l2 device, streamtype 0 minor 0 ivtv: Create DMA stream 1 ivtv: Registered v4l2 device, streamtype 1 minor 32 ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 224 ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 24 ivtv: Create stream 4 ivtv: Registered v4l2 device, streamtype 4 minor 64 ivtv: Create DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total ivtv: Registered v4l2 device, streamtype 5 minor 16 ivtv: Create stream 6 using 1024 2048 byte buffers 262144 kbytes total ivtv: Registered v4l2 device, streamtype 6 minor 228 ivtv: Create stream 7 ivtv: Registered v4l2 device, streamtype 7 minor 232 ivtv: Create DMA stream 8 ivtv: Registered v4l2 device, streamtype 8 minor 48 ivtv: ivtv_enc_thread: pid = 3257, itv = 0xf9ef3e20 ivtv: ivtv_dec_thread: pid = 3258, itv = 0xf9ef3e20 ivtv: Setting Tuner 47 tuner: tuner type not set saa7115: decoder set input (4) saa7115: now setting Composite input ivtv: Setting audio matrix to input 3, output 1 ivtv: Switching standard to NTSC. tuner: tuner type not set spurious 8259A interrupt: IRQ7. saa7115: decoder set norm NTSC saa7115: set audio: 0x01 saa7127: Setting Encoder Video Standard saa7127: Set NTSC Video Mode saa7127: Selecting NTSC video Standard ivtv: Initialized WinTV PVR 350, card #0 ivtv: ==================== END INIT IVTV ==================== lirc_dev: IR Remote Control driver registered, at major 61 bttv: driver version 0.7.108 loaded bttv: using 4 buffers with 2080k (8320k total) for capture i2c-core.o: driver i2c ir driver registered. lirc_i2c: chip found @ 0x18 (Hauppauge IR) ivtv: i2c attach [client=Hauppauge IR,ok] i2c-core.o: client [Hauppauge IR] registered to adapter [ivtv i2c driver #0](pos. 5). ------------------------------------------------------- SF.Net email is sponsored by: Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42" plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php _______________________________________________ Ivtv-users mailing list Ivtv-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-users
