Hi, i installed ivtv-0.3.9, the kernel is 2.6.12, the card is a PVR350.
I load the driver with this part in: ivtv-0.3.9/driver/Makefile2.6 reload: -sudo rmmod ivtv-fb ivtv msp3400 saa7115 saa7127 tuner sync -sudo modprobe i2c-core -sudo modprobe i2c-algo-bit -sudo insmod saa7115.ko -sudo insmod msp3400.ko once=1 simple=1 standard=0x03 -sudo modprobe tuner type=29 -sudo modprobe videodev -sudo insmod ivtv.ko ivtv_debug=0 ivtv_std=2 tuner=52 In /etc/modprobe.conf i have: options tuner type=2 options msp3400 once=1 simple=1 standard=0x03 alias char-major-81 videodev alias char-major-81-0 ivtv install char-major-81-0 /bin/true # whatever this means, # it was in there and i did not delete it. Even when i use ptune-ui.pl to capture from S-Video0 with a signal there, i only get a black screen. When i capture from tuner0, i get only noise. At least there is a difference. The ivtv-fw-enc.bin and ivtv-fw-dec.bin i got from the latest version from Hauppauges web page. In /var/log messages i see nothing that is basically wrong. Has anybody got a hint for me on how to continue? Best regards, Torsten.
Sep 16 11:26:25 glibber sudo: root : TTY=pts/4 ; PWD=/tmp/ivtv-0.3.9/driver ; USER=root ; COMMAND=/sbin/rmmod ivtv-fb ivtv msp3400 saa7115 saa7127 tuner Sep 16 11:26:26 glibber kernel: ivtv: Removed WinTV PVR 350, card #0 Sep 16 11:27:19 glibber kernel: cx25840: Unknown parameter `i2c_enable' Sep 16 11:27:22 glibber kernel: ivtv: ==================== START INIT IVTV ==================== Sep 16 11:27:22 glibber kernel: ivtv: version 0.3.9 (development svn snapshot revision 2677) loading Sep 16 11:27:22 glibber kernel: ivtv: Linux version: 2.6.12-default K7 REGPARM gcc-3.3 Sep 16 11:27:22 glibber kernel: ivtv: In case of problems please include the debug info Sep 16 11:27:22 glibber kernel: ivtv: between the START INIT IVTV and END INIT IVTV lines when Sep 16 11:27:22 glibber kernel: ivtv: mailing the ivtv-devel mailinglist. Sep 16 11:27:22 glibber kernel: ivtv: Autodetected WinTV PVR 350 card (iTVC15 based) Sep 16 11:27:22 glibber kernel: ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 Sep 16 11:27:22 glibber kernel: tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 7735007 Sep 16 11:27:22 glibber kernel: tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38) Sep 16 11:27:22 glibber kernel: tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) Sep 16 11:27:22 glibber kernel: tveeprom: audio processor = MSP4418 (type = 19) Sep 16 11:27:22 glibber kernel: tveeprom: decoder processor = SAA7115 (type = 13) Sep 16 11:27:22 glibber kernel: ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50] Sep 16 11:27:22 glibber kernel: tda9885/6/7: chip found @ 0x86 Sep 16 11:27:22 glibber kernel: ivtv: i2c attach to card #0 ok [client=tda9887, addr=43] Sep 16 11:27:22 glibber kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 Sep 16 11:27:22 glibber kernel: ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61] Sep 16 11:27:22 glibber kernel: tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by insmod option Sep 16 11:27:22 glibber kernel: tuner: The type=<n> insmod option will go away soon. Sep 16 11:27:22 glibber kernel: tuner: Please use the tuner=<n> option provided by Sep 16 11:27:22 glibber kernel: tuner: tv aard core driver (bttv, saa7134, ...) instead. Sep 16 11:27:22 glibber kernel: ivtv: i2c attach to card #0 ok [client=saa7115[50], addr=21] Sep 16 11:27:22 glibber kernel: saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) Sep 16 11:27:22 glibber kernel: ivtv: i2c attach to card #0 ok [client=saa7127, addr=44] Sep 16 11:27:22 glibber kernel: msp34xx: ivtv version Sep 16 11:27:22 glibber kernel: msp34xx: init: chip=MSP3418W-B3, has NICAM support, simple (D) mode, simpler (G) no-thread mode Sep 16 11:27:22 glibber kernel: msp34xx: $Id$ compiled on: Sep 15 2005 23:36:22 Sep 16 11:27:22 glibber kernel: ivtv: i2c attach to card #0 ok [client=MSP3418W-B3, addr=40] Sep 16 11:27:23 glibber kernel: ivtv: loading /lib/modules/ivtv-fw-enc.bin Sep 16 11:27:23 glibber kernel: ivtv: loading /lib/modules/ivtv-fw-dec.bin Sep 16 11:27:23 glibber kernel: ivtv: Encoder revision: 0x02050032 Sep 16 11:27:23 glibber kernel: ivtv warning: Encoder Firmware can be buggy, use version 0x02040011!!!! Sep 16 11:27:23 glibber kernel: ivtv: Decoder revision: 0x02020023 Sep 16 11:27:23 glibber kernel: ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) Sep 16 11:27:23 glibber kernel: ivtv: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) Sep 16 11:27:23 glibber kernel: ivtv: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) Sep 16 11:27:23 glibber kernel: ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) Sep 16 11:27:23 glibber kernel: ivtv: Create encoder radio stream Sep 16 11:27:23 glibber kernel: ivtv: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total) Sep 16 11:27:23 glibber kernel: ivtv: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total) Sep 16 11:27:23 glibber kernel: ivtv: Create decoder VOUT stream Sep 16 11:27:23 glibber kernel: ivtv: Allocate DMA decoder YUV stream: 20 x 51840 buffers (1024KB total) Sep 16 11:27:23 glibber kernel: tuner: type already set to 2, ignoring request for 52 Sep 16 11:27:24 glibber kernel: ivtv: Initialized WinTV PVR 350, card #0 Sep 16 11:27:24 glibber kernel: ivtv: ==================== END INIT IVTV ==================== Sep 16 11:27:28 glibber kernel: ivtv: Tried to open YUV output device but need to send data to mpeg decoder before it can be used
