Hi,
I've been deleting my cache prior to running the build.
The only way I can seem to make this work is to have a second resolver which has
the classifier hard-coded, ie:
<chain name="chain" returnFirst="true" dual="true">
<ibiblio name="central" m2compatible="true" checkconsistency="false"
pattern="[organisation]/[module]/[revision]/[artifact]-[revision].[ext]"/>
<ibiblio name="central2" m2compatible="true" checkconsistency="false"
pattern="[organisation]/[module]/[revision]/[artifact]-[revision]-jdk15.[ext]"/>
</chain>
This seems to work (at least all the jars I expect to find are being downloaded
to my local repo).
Cheers, Andy
> On 04 February 2014 at 06:55 Marc De Boeck <mdeb...@gmail.com> wrote:
>
> You may have to remove the json-lib entry in your cache. Check also how the
> artifacts were stored in the cache. Could you find the jdk-specific artifacts
> there ?
>
> Marc
>
>
> 2014-02-03 a...@far2gone.com <mailto:a...@far2gone.com> <a...@far2gone.com
> <mailto:a...@far2gone.com> >:
> > > Hi,
> >
> > thanks for your answer once again.
> >
> > My ivysettings.xml file now looks like:
> >
> >
> > <ivysettings>
> >
> > <settings defaultResolver="chain" defaultConflictManager="all" /> <!--
> > get all revisions without any eviction -->
> >
> > <caches defaultCacheDir="${ivy.cache.dir}/no-namespace" />
> >
> > <resolvers>
> >
> > <filesystem name="fs1">
> > <ivy
> >
> >
> > pattern="${dest.repo.dir}/no-namespace/[organisation]/[module]/ivys/ivy-[revision](-[classifier]).xml"
> > />
> > <artifact
> >
> >
> > pattern="${dest.repo.dir}/no-namespace/[organisation]/[module]/[type]s/[artifact]-[revision](-[classifier]).[ext]"
> > />
> >
> >
> > </filesystem>
> >
> >
> > <chain name="chain" returnFirst="true" dual="true">
> >
> >
> >
> >
> >
> > <ibiblio name="central" m2compatible="true"
> >
> >
> > pattern="[organisation]/[module]/[revision]/[artifact]-[revision](-[classifier]).[ext]"/>
> >
> >
> >
> > </chain>
> >
> > </resolvers>
> >
> > </ivysettings>
> >
> >
> > Unfortunately, when I run the ant task the result is:
> >
> >
> >
> > [ivy:install] :: installing net.sf.json-lib#json-lib;2.4 ::
> > [ivy:install] :: resolving dependencies ::
> > [ivy:install] found net.sf.json-lib#json-lib;2.4 in chain
> > [ivy:install] :: downloading artifacts to cache ::
> > [ivy:install] :: installing in fs1 ::
> > [ivy:install] published ivy to
> > c:\tmp\ivy-test\repo\no-namespace\net.sf.json-lib\json-lib\ivys\ivy-2.4.xml
> > [ivy:install] :: install resolution report ::
> > [ivy:install] :: resolution report :: resolve 0ms :: artifacts dl 175ms
> > ---------------------------------------------------------------------
> > | | modules || artifacts |
> > | conf | number| search|dwnlded|evicted|| number|dwnlded|
> > ---------------------------------------------------------------------
> > | default | 1 | 0 | 0 | 0 || 1 | 0 |
> > ---------------------------------------------------------------------
> > [ivy:install]
> > [ivy:install] :: problems summary ::
> > [ivy:install] :::: WARNINGS
> > [ivy:install] [FAILED ] net.sf.json-lib#json-lib;2.4!json-lib.jar: (0ms)
> > [ivy:install] ==== central: tried
> >
> >
> > [ivy:install]<http://repo1.maven.org/maven2/net/sf/json-lib/json-lib/2.4/json-lib-2.4.jar>
> > [ivy:install] ::::::::::::::::::::::::::::::::::::::::::::::
> > [ivy:install] :: FAILED DOWNLOADS ::
> > [ivy:install] :: ^ see resolution messages for details ^ ::
> > [ivy:install] ::::::::::::::::::::::::::::::::::::::::::::::
> > [ivy:install] :: net.sf.json-lib#json-lib;2.4!json-lib.jar
> > [ivy:install] ::::::::::::::::::::::::::::::::::::::::::::::
> > [ivy:install]
> > [ivy:install]
> > [ivy:install] :: USE VERBOSE OR DEBUG MESSAGE LEVEL FOR MORE DETAILS
> >
> > BUILD FAILED
> > D:\ar-work\tmp\ivy-classifier-test\build.xml:32: Problem happened while
> > installing modules - see output for details
> >
> >
> >
> > The other libraries are downloaded as expected.
> >
> >
> >
> > Cheers, Andy
> >
> > > On 29 January 2014 at 21:32 Marc De Boeck < mdeb...@gmail.com
> > > <mailto:mdeb...@gmail.com> > wrote:
> > >
> > >
> > > I could reproduce the problem you are describing.
> > > It seems that the pom-file of this json-lib is not consistent with the
> > > published artifacts.
> > >
> > > Try to specify the artifact pattern in your central resolver to
> > > something
> > > like this:
> > >
> > > <ibiblio name="central" m2compatible="true">
> > > <pattern="[organisation]/[module]/[revision]/[artifact]-[revision]
> > > (-[classifier]).[ext]"/>
> > > </ibiblio>
> > >
> > > You should also add in the same way the artifact pattern for your cache
> > > and
> > > for your local repo. Otherwise, all these artifacts will be mapped to
> > > the
> > > same artifact name, and only one of the artifacts will end up in your
> > > local
> > > repo.
> > >
> > > Regards,
> > > Marc
> > >
> > >
> > >
> > >
> > > 2014-01-29 a...@far2gone.com <mailto:a...@far2gone.com> <
> > > a...@far2gone.com <mailto:a...@far2gone.com> >
> > >
> > > > Hi,
> > > >
> > > > I think my use case is straightforward, I want to use Ivy to make a
> > > > local
> > > > Ivy
> > > > repository of libraries available in maven central. This repository
> > > > is
> > > > then used
> > > > to find dependencies declared in a gradle build.
> > > >
> > > > The intent is to have a build script that will automatically trundle
> > > > off
> > > > and
> > > > collect all the jars requested in "install" tasks and store them
> > > > locally
> > > > (whether on the laptop of a developer who is new to the project or on
> > > > a CI
> > > > server etc.).
> > > >
> > > > I think the problem I face is that without declaring a classifier in
> > > > the
> > > > install
> > > > task, non of the json-lib jars are downloaded at all.
> > > >
> > > > I don't think I'm trying to prematurely refine the content of the
> > > > repository, in
> > > > fact I'd be happy if all the available variants were downloaded, the
> > > > problem is
> > > > that nothing is downloaded.
> > > >
> > > > I suspect the reason is as follows, if you take a look at the maven
> > > > web
> > > > site
> > > > page for json-lib at:
> > > >
> > > ><http://mvnrepository.com/artifact/net.sf.json-lib/json-lib/2.4>
> > > >
> > > > The link it gives to download the jar is:
> > > >
> > > >
> > >
> > ><http://repo1.maven.org/maven2/net/sf/json-lib/json-lib/2.4/json-lib-2.4.jar>
> > > >
> > > > Which gives a 404 Not Found.
> > > >
> > > > Looking in the directory in which the jar files are stored:
> > > >
> > > ><http://repo1.maven.org/maven2/net/sf/json-lib/json-lib/2.4/>
> > > >
> > > > It can be seen that the jar file names all include a jdk13 or a jdk15
> > > > in
> > > > the
> > > > file name.
> > > >
> > > > So, I think I need to persuade Ivy to put a jdk15 somewhere in the
> > > > file
> > > > name it
> > > > is expecting?
> > > >
> > > > If I were using specific Ivy dependencies I think I would use a
> > > > classifier
> > > > in
> > > > the dependency statement to achieve this.
> > > >
> > > > Where I get completely unstuck is figuring out how to persuade an Ivy
> > > > install to
> > > > download the files (either all of them or just the ones I ask for)...
> > > >
> > > > My setup is copied pretty much verbatim from the Ivy repository
> > > > tutorial,
> > > > ivy
> > > > settings and ant build copied below.
> > > >
> > > > Cheers, Andy
> > > >
> > > > Ivy settings:
> > > >
> > > > <ivysettings>
> > > >
> > > > <settings defaultResolver="chain" defaultConflictManager="all" />
> > > > <!--
> > > > get all
> > > > revisions without any eviction -->
> > > >
> > > > <caches defaultCacheDir="${ivy.cache.dir}/no-namespace" />
> > > >
> > > > <resolvers>
> > > >
> > > > <filesystem name="fs1">
> > > > <ivy
> > > >
> > > >
> > pattern="${dest.repo.dir}/no-namespace/[organisation]/[module]/ivys/ivy-[revision].xml"
> > > > />
> > > > <artifact
> > > >
> > > >
> > pattern="${dest.repo.dir}/no-namespace/[organisation]/[module]/[type]s/[artifact]-[revision].[ext]"
> > > > />
> > > > </filesystem>
> > > >
> > > >
> > > > <chain name="chain" returnFirst="true" dual="true">
> > > >
> > > > <ibiblio name="central" m2compatible="true"/>
> > > >
> > > > </chain>
> > > >
> > > > <ibiblio name="libraries" m2compatible="true" />
> > > >
> > > > </resolvers>
> > > >
> > > > </ivysettings>
> > > >
> > > >
> > > > Ant build:
> > > >
> > > > <target name="install-libs" description="--> install module from
> > > > maven 2
> > > > repository" depends="init-ivy">
> > > >
> > > > <property name="dest.repo.dir" value="${externalBuildDir}/${repoDir}"
> > > > />
> > > > <property name="ivy.cache.dir"
> > > > value="${externalBuildDir}/${ivyCacheDir}"/>
> > > >
> > > > <ivy:settings file="${basedir}/ivysettings.xml"/>
> > > >
> > > > <ivy:install organisation="log4j" module="log4j" revision="1.2.17"
> > > > from="chain"
> > > > to="fs1" transitive="true" overwrite="true"/>
> > > >
> > > > <ivy:install organisation="org.apache.solr" module="solr-solrj"
> > > > revision="4.5.1"
> > > > from="chain" to="fs1" transitive="true" overwrite="true"/>
> > > >
> > > > <!-- a load of other libraries that install ok -->
> > > >
> > > > <!-- the cause of my woe -->
> > > > <ivy:install organisation="net.sf.json-lib" module="json-lib"
> > > > revision="2.4"
> > > > from="chain" to="fs1" transitive="false" overwrite="true" />
> > > >
> > > > </target>
> > > >
> > > >
> > > > > On 28 January 2014 at 19:05 Kirby Files < kirby.fi...@masergy.com
> > > > > <mailto:kirby.fi...@masergy.com> > wrote:
> > > > >
> > > > >
> > > > > The install task is for copying entire modules into a repository.
> > > > > You
> > > > > typically don't do surgery on the artifacts, filtering by type or
> > > > > classifier, at this point. Once it's in your repository, you use
> > > > > the
> > > > > retrieve task to pull specific artifacts from dependencies.
> > > > >
> > > > > Perhaps you can explain your use case a little more, and
> > > > > demonstrate
> > > > > what you hope to accomplish with the install task.
> > > > >
> > > > > --Kirby
> > > > >
> > > > > Sent from my mobile device
> > > > >
> > > > > On Jan 28, 2014, at 1:30 PM, Andy Redhead < a...@far2gone.com
> > > > > <mailto:a...@far2gone.com> > wrote:
> > > > >
> > > > > > Hi,
> > > > > > Thanks for your reply and if I was using a dependency then I
> > > > > > think this
> > > > > > would be sufficient.
> > > > > >
> > > > > > What I really need is the equivalent for the install task.
> > > > > >
> > > > > > Cheers, Andy
> > > > > >
> > > > > > On 28 Jan 2014 14:44, David Weintraub < qazw...@gmail.com
> > > > > > <mailto:qazw...@gmail.com> > wrote:
> > > > > >>
> > > > > >> There are a couple of things you need:
> > > > > >>
> > > > > >> * You need to add the following line to the top of your ivy.xml
> > > > > >> file:
> > > > > >>
> > > > > >> <ivy-module version="1.0" xmlns:maven="<http://maven.apache.org>
> > > > > >> ">
> > > > > >>
> > > > > >> Note the "xmlns" declaration. It doesn't matter where it points
> > > > > >> to (I
> > > > like
> > > > > >> using the URL of the project), you just need to declare the
> > > > > >> namespace.
> > > > > >>
> > > > > >> * Now, you can use that Maven classifier in your dependency
> > > > declaration:
> > > > > >>
> > > > > >> <dependency org="net.sf.json-lib"
> > > > > >> name="json-lib"
> > > > > >> rev="2.4"
> > > > > >> conf="compile->default">
> > > > > >> <artifact name="json-lib"
> > > > > >> type="jar"
> > > > > >> ext="jar"
> > > > > >> maven:classifier="jdk15"/>
> > > > > >> </dependency>
> > > > > >>
> > > > > >>
> > > > > >> --
> > > > > >> David Weintraub
> > > > > >> qazw...@gmail.com <mailto:qazw...@gmail.com>
> > > > > >>
> > > > > >> ================================================
> > > > > >> Sure, call me crazy. They called Eddie Antar crazy too, but
> > > > > >> look at these low, low prices on all of these famous name brand
> > > > appliances.
> > > > > >>
> > > > > >>
> > > > > >> On Jan 28, 2014, at 8:40 AM, a...@far2gone.com
> > > > > >> <mailto:a...@far2gone.com> wrote:
> > > > > >>
> > > > > >>> Hi,
> > > > > >>>
> > > > > >>> I've been having a go at using the Ivy Install ant task to
> > > > > >>> create a
> > > > local
> > > > > >>> repository based on libraries downloaded from maven central.
> > > > > >>>
> > > > > >>> Having gone along with the tutorial, all seemed to be working
> > > > > >>> :)
> > > > > >>>
> > > > > >>> Until...
> > > > > >>>
> > > > > >>> One of the dependencies in my project is json-lib.
> > > > > >>>
> > > > > >>> It seems that the json-lib project uses a maven classifier to
> > > > discriminate
> > > > > >>> between jars suitable for different versions of the jvm.
> > > > > >>>
> > > > > >>> If I were just declaring a dependency I think I could do this:
> > > > > >>>
> > > > > >>> <dependency>
> > > > > >>> <groupId>net.sf.json-lib</groupId>
> > > > > >>> <artifactId>json-lib</artifactId>
> > > > > >>> <version>2.4</version>
> > > > > >>> <classifier>jdk15</classifier>
> > > > > >>> </dependency>
> > > > > >>>
> > > > > >>> However, I'm using install tasks that look like:
> > > > > >>>
> > > > > >>> <ivy:install organisation="log4j" module="log4j"
> > > > > >>> revision="1.2.17"
> > > > > >>> from="chain"
> > > > > >>> to="fs1" transitive="true" overwrite="true"/>
> > > > > >>>
> > > > > >>> How should I declare the "classifier" on an "install" task?
> > > > > >>>
> > > > > >>> Thanks, Andy
> > > > > >>
> > >
