Hello all.
First of all - sorry for my english. :-)
My system:
FreeBSD 6.1-RELEASE-p10
Jabberd-2.0.11
Openldap-sasl-2.2.30
JAJC 0.0.8.112 as a jabber client
My problem:
We use LDAP to auth our jabber users.
Time after time in some of our remote office people have this situation:
They connect to our jabber server, pass SSL auth and... nothing.
Some think like they cant get they session.
Logs:
/var/log/jabberd/sm-yerevan.log
Fri Dec 28 10:49:10 2007 [notice] starting up
Fri Dec 28 10:49:10 2007 [notice] id: yerevan.fxclub.org
Fri Dec 28 10:49:10 2007 [info] process id is 25140, written to
/var/jabberd/pid/sm-yerevan.pid
Fri Dec 28 10:49:10 2007 [notice] initialised storage driver 'db'
Fri Dec 28 10:49:10 2007 [notice] version: jabberd sm 2.0s11
Fri Dec 28 10:49:10 2007 [notice] attempting connection to router at
127.0.0.1, port=5347
Fri Dec 28 10:49:10 2007 [notice] connection to router established
Fri Dec 28 10:49:10 2007 [notice] ready for sessions
/var/log/jabberd/c2s.log:
Fri Dec 28 11:03:04 2007 [notice] [29] auth succeeded: username=chief,
resource=Work
Fri Dec 28 11:03:04 2007 [notice] [29] requesting session:
[EMAIL PROTECTED]/Work
Fri Dec 28 11:03:04 2007 [notice] [29] auth succeeded: username=support,
resource=Work
Fri Dec 28 11:03:04 2007 [notice] [29] requesting session:
[EMAIL PROTECTED]/Work
In router and resolver logs all seems ok.
What this can may be? It is start to happened to often.
My configs in attach. If some think else need, just ask...
--
Best regards,
Proskurin Kirill
<!-- c2s configuration -->
<c2s>
<!-- Our ID on the network (default: c2s) -->
<id>c2s</id>
<!-- The process ID file. comment this out if you don't need to know
to know the process ID from outside the process (eg for control
scripts) -->
<pidfile>/var/jabberd/pid/c2s.pid</pidfile>
<!-- Router connection configuration -->
<router>
<!-- IP/port the router is waiting for connections on -->
<ip>127.0.0.1</ip> <!-- default: 127.0.0.1 -->
<port>5347</port> <!-- default: 5347 -->
<!-- Username/password to authenticate as -->
<user>jabberd</user> <!-- default: jabberd -->
<pass>*some pass*</pass> <!-- default: secret -->
<!-- File containing a SSL certificate and private key to use when
setting up an encrypted channel with the router. If this is
commented out, or the file can't be read, no attempt will be
made to establish an encrypted channel with the router. -->
<!--
<pemfile>/usr/local/etc/certs/jabberd.pem</pemfile>
-->
<!-- Router connection retry -->
<retry>
<!-- If the connection to the router can't be established at
startup, we should try again this many times before exiting.
Use -1 to retry indefinitely. [default: 3] -->
<init>3</init>
<!-- If we lost the connection to the router during normal
operation (ie we've successfully connected to the router in
the past), we should try to reconnect this many times before
exiting. Use -1 to retry indefinitely. [default: 3] -->
<lost>3</lost>
<!-- Sleep for this many seconds before trying attempting a
reconnect. [default: 2] -->
<sleep>2</sleep>
</retry>
</router>
<!-- Log configuration - type is "syslog", "file" or "stdout" -->
<log type='file'>
<!-- If logging to syslog, this is the log ident -->
<ident>jabberd/c2s</ident>
<!-- If logging to syslog, this is the log facility
(local0 - local7) [default: local3] -->
<!-- <facility>local3</facility> -->
<!-- If logging to file, this is the filename of the logfile -->
<file>/var/jabberd/log/c2s.log</file>
</log>
<!-- Local network configuration -->
<local>
<!-- Who we identify ourselves as. This should correspond to the
ID (host) that the session manager thinks it is. You can
specify more than one to support virtual hosts, as long as you
have additional session manager instances on the network to
handle those hosts. The realm attribute specifies the auth/reg
or SASL authentication realm for the host. If the attribute is
not specified, the realm will be selected by the SASL
mechanism, or will be the same as the ID itself. Be aware that
users are assigned to a realm, not a host, so two hosts in the
same realm will have the same users.
If no realm is specified, it will be set to be the same as the
ID. -->
<id realm='fxclub.org'>fxclub.org</id>
<id realm='samara.fxclub.org'>samara.fxclub.org</id>
<id realm='nnov.fxclub.org'>nnov.fxclub.org</id>
<id realm='vld.fxclub.org'>vld.fxclub.org</id>
<id realm='khb.fxclub.org'>khb.fxclub.org</id>
<id realm='spb.fxclub.org'>spb.fxclub.org</id>
<id realm='krsk.fxclub.org'>krsk.fxclub.org</id>
<id realm='nsk.fxclub.org'>nsk.fxclub.org</id>
<id realm='donetsk.fxclub.org'>donetsk.fxclub.org</id>
<id realm='khbank.fxclub.org'>khbank.fxclub.org</id>
<id realm='tyumen.fxclub.org'>tyumen.fxclub.org</id>
<id realm='academy.fxclub.org'>academy.fxclub.org</id>
<id realm='omsk.fxclub.org'>omsk.fxclub.org</id>
<id realm='yerevan.fxclub.org'>yerevan.fxclub.org</id>
<id realm='chel.fxclub.org'>chel.fxclub.org</id>
<id realm='kazan.fxclub.org'>kazan.fxclub.org</id>
<id realm='rostov.fxclub.org'>rostov.fxclub.org</id>
<id realm='kharkov.fxclub.org'>kharkov.fxclub.org</id>
<id realm='tomsk.fxclub.org'>tomsk.fxclub.org</id>
<id realm='kyiv.fxclub.org'>kyiv.fxclub.org</id>
<id realm='krasnodar.fxclub.org'>krasnodar.fxclub.org</id>
<id realm='odessa.fxclub.org'>odessa.fxclub.org</id>
<id realm='dnipro.fxclub.org'>dnipro.fxclub.org</id>
<id realm='china.fxclub.org'>china.fxclub.org</id>
<id realm='kaliningrad.fxclub.org'>kaliningrad.fxclub.org</id>
<id realm='ufa.fxclub.org'>ufa.fxclub.org</id>
<id realm='eburg.fxclub.org'>eburg.fxclub.org</id>
<id realm='vlg.fxclub.org'>vlg.fxclub.org</id>
<id realm='perm.fxclub.org'>perm.fxclub.org</id>
<id realm='ny.fxclub.org'>ny.fxclub.org</id>
<id realm='fxclub.com'>fxclub.com</id>
<id realm='irkutsk.fxclub.org'>irkutsk.fxclub.org</id>
<id realm='almaty.fxclub.org'>almaty.fxclub.org</id>
<id realm='minsk.fxclub.org'>minsk.fxclub.org</id>
<id realm='saratov.fxclub.org'>saratov.fxclub.org</id>
<id realm='tlt.fxclub.org'>tlt.fxclub.org</id>
<id realm='surgut.fxclub.org'>surgut.fxclub.org</id>
<id realm='ansbach.fxclub.org'>ansbach.fxclub.org</id>
<id realm='china.forexclub.biz'>china.forexclub.biz</id>
<id realm='mgn.fxclub.org'>mgn.fxclub.org</id>
<id realm='yar.fxclub.org'>yar.fxclub.org</id>
<id realm='msk.fxclub.org'>msk.fxclub.org</id>
<!-- IP address to bind to (default: 0.0.0.0) -->
<ip>0.0.0.0</ip>
<!-- Port to bind to, or 0 to disable unencrypted access to the
server (default: 5222) -->
<port>5222</port>
<!-- File containing a SSL certificate and private key for client
connections. If this is commented out, clients will not be
offered the STARTTLS stream extension -->
<pemfile>/usr/local/etc/certs/jabberd.pem</pemfile>
<!-- File containing an optional SSL certificate chain file for client
SSL connections. -->
<!--
<cachain>/usr/local/etc/jabberd/cachain.pem</cachain>
-->
<!-- Require STARTTLS. If this is enabled, clients must do STARTTLS
before they can authenticate. Until the stream is encrypted,
all packets will be dropped. -->
<require-starttls/>
<!-- Older versions of jabberd support encrypted client connections
via an additional listening socket on port 5223. If you want
this (required to allow pre-STARTTLS clients to do SSL),
uncomment this -->
<ssl-port>5223</ssl-port>
</local>
<!-- Input/output settings -->
<io>
<!-- Maximum number of file descriptors. Note that the number of
possible connections will be slightly less than this, because
c2s itself can use up five on its own, and auth/reg modules may
need a few also. If the supply of file descriptors is
exhausted, new incoming connections will be denied.
(default: 1024) -->
<max_fds>1024</max_fds>
<!-- Rate limiting -->
<limits>
<!-- Maximum bytes per second - if more than X bytes are sent in Y
seconds, connection is throttled for Z seconds. The format
is:
<bytes seconds='Y' throttle='Z'>X</bytes>
Default Y is 1, default Z is 5. set X to 0 to disable. -->
<bytes>1024</bytes>
<!-- Maximum connects per second - if more than X connects are
attempted from a single IP in Y seconds, that IP is throttled
for Z seconds. The format is:
<connects seconds='Y' throttle='Z'>X</connects>
Default Y is 5, default Z is 5. set X to 0 to disable. -->
<connects>100</connects>
</limits>
<!-- IP-based access controls. If a connection IP matches an allow
rule, the connection will be accepted. If a connecting IP
matches a deny rule, the connection will be refused. If the
connecting IP does not match any rules, or it matches both an
allow and a deny rule, the contents of the <order/> option
determines what happens. -->
<access>
<!-- Rule check order (default: allow,deny)
allow,deny - Check allow rules, then check deny rules.
Allow by default.
deny,allow - Check deny rules, then check allow rules.
Deny by default. -->
<order>allow,deny</order>
</access>
<!-- Timed checks -->
<check>
<!-- Interval between checks.
Open client connections will be checked every n seconds, and
the following checks applied.
0 disables all checks. (default: 0) -->
<interval>0</interval>
<!-- Idle connection checks.
Connections that have not sent data for longer than this many
seconds will be dropped.
0 disables idle timeouts. (default: 0) -->
<idle>0</idle>
<!-- Keepalives.
Connections that have not sent data for longer than this many
seconds will have a single whitespace character sent to them.
This will force the TCP connection to be closed if they have
disconnected without us knowing about it.
0 disables keepalives. (default: 0) -->
<keepalive>0</keepalive>
</check>
</io>
<!-- Authentication/registration database configuration -->
<authreg>
<!-- Backend module to use -->
<module>ldap</module>
<!-- Registration configuration -->
<register>
<!-- Account registration is enabled by default (provided the
auth/reg module in use supports it). Comment this out to
disable. -->
<!-- <enable/> -->
<!-- Human-readable instructions to be returned to client when
registration is requested. -->
<instructions>Account registration is disabled.</instructions>
<!-- Password change only. When registration is disabled, it may
still be useful to allow clients to change their password. If
you want this, uncomment this when you disable registration. -->
<!--
<password/>
-->
</register>
<!-- Available authentication mechanisms -->
<mechanisms>
<!-- These are the traditional Jabber authentication mechanisms.
Comment out any that you don't want to be offered to clients.
Note that if the auth/reg module does not support one of
these mechanisms, then it will not be offered regardless of
whether or not it is enabled here.
Similarly, if <zerok/> is disabled, then zero-knowledge data
will not be created when a user is registered. -->
<traditional>
<plain/>
<digest/>
<zerok/>
</traditional>
<!-- SASL authentication mechanisms. Comment out any that you
don't want to be offered to clients. Again, if the auth/reg
module does not support one of these mechanisms, then it will
not be offered. -->
<sasl>
<plain/>
<digest-md5/>
<!--
<anonymous/>
-->
</sasl>
</mechanisms>
<!-- MySQL module configuration -->
<mysql>
<!-- Database server host and port -->
<host>localhost</host>
<port>3306</port>
<!-- Database name -->
<dbname>jabberd2</dbname>
<!-- Database username and password -->
<user>jabberd2</user>
<pass>*some pass*</pass>
</mysql>
<!-- PostgreSQL module configuration -->
<pgsql>
<!-- Database server host and port -->
<host>localhost</host>
<port>5432</port>
<!-- Database name -->
<dbname>jabberd2</dbname>
<!-- Database username and password -->
<user>jabberd2</user>
<pass>*some pass*</pass>
</pgsql>
<!-- Berkeley DB module configuration -->
<db>
<!-- Directory to store database files under -->
<path>/var/jabberd/db</path>
<!-- Synchronize the database to disk after each write. If you
disable this, database accesses may be faster, but data may
be lost if jabberd crashes. -->
<sync/>
</db>
<!-- LDAP module configuration -->
<ldap>
<!-- LDAP server host and port (default: 389) -->
<host>localhost</host>
<port>389</port>
<!-- Use LDAP v3 if possible. If disabled, v2 will be used.
Encryption options are only available if v3 is enabled. -->
<v3/>
<!-- Encryption. If enabled, this will create an encrypted channel
to the LDAP server using the LDAP STARTTLS mechanism. -->
<!--
<starttls/>
-->
<!-- Encryption. If enabled, this will create an encrypted channel
to the server using the old-style "ldaps://" mechanism. It is
recommended that you use <starttls/> instead of this. -->
<!--
<ssl/>
-->
<!-- DN to bind as for searches. If unspecified, the searches
will be done anonymously. -->
<binddn>uid=proxy,ou=Services,dc=fxclub,dc=org</binddn>
<bindpw>*some pass*</bindpw>
<!-- LDAP attribute that holds the user ID (default: uid) -->
<uidattr>uid</uidattr>
<!-- base DN of the tree. You should specify a DN for each
authentication realm declared in the <local/> section above,
by using the realm attribute. -->
<basedn realm='fxclub.org'>ou=People,dc=fxclub,dc=org</basedn>
<basedn realm='samara.fxclub.org'>dc=samara,dc=fxclub,dc=org</basedn>
<basedn realm='nnov.fxclub.org'>dc=nnov,dc=fxclub,dc=org</basedn>
<basedn realm='vld.fxclub.org'>dc=vld,dc=fxclub,dc=org</basedn>
<basedn realm='khb.fxclub.org'>dc=khb,dc=fxclub,dc=org</basedn>
<basedn realm='spb.fxclub.org'>dc=spb,dc=fxclub,dc=org</basedn>
<basedn realm='krsk.fxclub.org'>dc=krsk,dc=fxclub,dc=org</basedn>
<basedn realm='nsk.fxclub.org'>dc=nsk,dc=fxclub,dc=org</basedn>
<basedn realm='donetsk.fxclub.org'>dc=donetsk,dc=fxclub,dc=org</basedn>
<basedn realm='khbank.fxclub.org'>dc=khbank,dc=fxclub,dc=org</basedn>
<basedn realm='tyumen.fxclub.org'>dc=tyumen,dc=fxclub,dc=org</basedn>
<basedn realm='academy.fxclub.org'>dc=academy,dc=fxclub,dc=org</basedn>
<basedn realm='omsk.fxclub.org'>dc=omsk,dc=fxclub,dc=org</basedn>
<basedn realm='yerevan.fxclub.org'>dc=yerevan,dc=fxclub,dc=org</basedn>
<basedn realm='chel.fxclub.org'>dc=chel,dc=fxclub,dc=org</basedn>
<basedn realm='kazan.fxclub.org'>dc=kazan,dc=fxclub,dc=org</basedn>
<basedn realm='rostov.fxclub.org'>dc=rostov,dc=fxclub,dc=org</basedn>
<basedn realm='kharkov.fxclub.org'>dc=kharkov,dc=fxclub,dc=org</basedn>
<basedn realm='tomsk.fxclub.org'>dc=tomsk,dc=fxclub,dc=org</basedn>
<basedn realm='kyiv.fxclub.org'>dc=kyiv,dc=fxclub,dc=org</basedn>
<basedn realm='krasnodar.fxclub.org'>dc=krasnodar,dc=fxclub,dc=org</basedn>
<basedn realm='odessa.fxclub.org'>dc=odessa,dc=fxclub,dc=org</basedn>
<basedn realm='dnipro.fxclub.org'>dc=dnipro,dc=fxclub,dc=org</basedn>
<basedn realm='china.fxclub.org'>dc=china,dc=fxclub,dc=org</basedn>
<basedn realm='kaliningrad.fxclub.org'>dc=kaliningrad,dc=fxclub,dc=org</basedn>
<basedn realm='ufa.fxclub.org'>dc=ufa,dc=fxclub,dc=org</basedn>
<basedn realm='eburg.fxclub.org'>dc=eburg,dc=fxclub,dc=org</basedn>
<basedn realm='vlg.fxclub.org'>dc=vlg,dc=fxclub,dc=org</basedn>
<basedn realm='perm.fxclub.org'>dc=perm,dc=fxclub,dc=org</basedn>
<basedn realm='fxclub.com'>dc=ny,dc=fxclub,dc=org</basedn>
<basedn realm='ny.fxclub.org'>dc=ny,dc=fxclub,dc=org</basedn>
<basedn realm='irkutsk.fxclub.org'>dc=irkutsk,dc=fxclub,dc=org</basedn>
<basedn realm='almaty.fxclub.org'>dc=almaty,dc=fxclub,dc=org</basedn>
<basedn realm='minsk.fxclub.org'>dc=minsk,dc=fxclub,dc=org</basedn>
<basedn realm='saratov.fxclub.org'>dc=saratov,dc=fxclub,dc=org</basedn>
<basedn realm='tlt.fxclub.org'>dc=tlt,dc=fxclub,dc=org</basedn>
<basedn realm='surgut.fxclub.org'>dc=surgut,dc=fxclub,dc=org</basedn>
<basedn realm='ansbach.fxclub.org'>dc=ansbach,dc=fxclub,dc=org</basedn>
<basedn realm='china.forexclub.biz'>dc=china,dc=biz,dc=fxclub,dc=org</basedn>
<basedn realm='mgn.fxclub.org'>dc=mgn,dc=fxclub,dc=org</basedn>
<basedn realm='yar.fxclub.org'>dc=yar,dc=fxclub,dc=org</basedn>
<basedn realm='msk.fxclub.org'>dc=msk,dc=fxclub,dc=org</basedn>
</ldap>
<!-- Pipe module configuration -->
<pipe>
<!-- Program to execute -->
<exec>/home/jabberd/bin/pipe-auth.pl</exec>
</pipe>
</authreg>
</c2s>
<!-- Router configuration -->
<router>
<!-- ID of the router on the network (default: router) -->
<id>router</id>
<!-- The process ID file. comment this out if you don't need to know
to know the process ID from outside the process (eg for control
scripts) -->
<pidfile>/var/jabberd/pid/router.pid</pidfile>
<!-- Log configuration - type is "syslog", "file" or "stdout" -->
<log type='file'>
<!-- If logging to syslog, this is the log ident -->
<ident>jabberd/router</ident>
<!-- If logging to syslog, this is the log facility
(local0 - local7) [default: local3] -->
<!-- <facility>local3</facility> -->
<!-- If logging to file, this is the filename of the logfile -->
<file>/var/jabberd/log/router.log</file>
</log>
<!-- Local network configuration -->
<local>
<!-- IP address to bind to (default: 0.0.0.0) -->
<ip>0.0.0.0</ip>
<!-- Port to bind to (default: 5347) -->
<port>5347</port>
<!-- File containing the user table. This is where the router gets
its component and secret information from for component
authentication.-->
<users>/usr/local/etc/jabberd/router-users.xml</users>
<!-- Shared secret used to identify legacy components (that is,
"jabber:component:accept" components that authenticate using
the "handshake" method). If this is commented out, support for
legacy components will be disabled. -->
<secret>odvjo629wua[pc38</secret>
<!-- File containing a SSL certificate and private key for client
connections. If this is commented out, connecting components
will not be able to request a SSL-encrypted channel. -->
<!--
<pemfile>/usr/local/etc/certs/jabberd.pem</pemfile>
-->
</local>
<!-- Timed checks -->
<check>
<!-- Interval between checks.
Checks will be run every n seconds.
0 disables all checks. (default: 60) -->
<interval>60</interval>
<!-- Keepalives.
Connections that have not been used for longer than
this many seconds will have a single whitespace character sent
to them. This will force the TCP connection to be closed if
they have disconnected without us knowing about it.
0 disables keepalives. (default: 0) -->
<keepalive>0</keepalive>
</check>
<!-- input/output settings -->
<io>
<!-- Maximum number of file descriptors. Note that the number of
possible connections will be slightly less than this, because
the router itself can use up four on its own. If the supply of
file descriptors is exhausted, new incoming connections will be
denied (default: 1024) -->
<max_fds>1024</max_fds>
<!-- Rate limiting -->
<limits>
<!-- Maximum bytes per second - if more than X bytes are sent in Y
seconds, connection is throttled for Z seconds. The format
is:
<bytes seconds='Y' throttle='Z'>X</bytes>
Default Y is 1, default Z is 5. set X to 0 to disable. -->
<bytes>0</bytes>
<!-- Maximum connects per second - if more than X connects are
attempted from a single IP in Y seconds, that IP is throttled
for Z seconds. The format is:
<connects seconds='Y' throttle='Z'>X</connects>
Default Y is 5, default Z is 5. set X to 0 to disable. -->
<connects>0</connects>
</limits>
<!-- IP-based access controls. If a connection IP matches an allow
rule, the connection will be accepted. If a connecting IP
matches a deny rule, the connection will be refused. If the
connecting IP does not match any rules, or it matches both an
allow and a deny rule, the contents of the <order/> option
determines what happens. -->
<access>
<!-- Rule check order (default: allow,deny)
allow,deny - Check allow rules, then check deny rules.
Allow by default.
deny,allow - Check deny rules, then check allow rules.
Deny by default. -->
<order>deny,allow</order>
<!-- Allow a network. If the mask isn't specified, it defaults to
255.255.255.255 (ie allow onle the specified IP) -->
<!--
<allow ip='127.0.0.0' mask='255.0.0.0'/>
-->
<!-- Allow localhost -->
<allow ip='127.0.0.1'/>
<allow ip='195.161.112.230'/>
<!-- Deny a network or a host -->
<!--
<deny ip='127.0.0.1' mask='255.0.0.0'/>
<deny ip='87.65.43.21'/>
-->
</access>
</io>
<!-- Name aliases.
Packets destined for the domain specified in the "name" attribute
will be routed to the component that has currently bound the name
in the "target" attribute (assuming it is online).
This is usually only required for some kinds of legacy
components (particularly jabberd 1.4 "uplink" components) -->
<aliases>
<!-- Example for a MUC component running from a jabberd 1.4 uplink -->
<alias name='conference.fxclub.org' target='muc-linker'/>
</aliases>
<!-- Access control information -->
<aci>
<!-- The usernames listed here will get access to all restricted
functions, regardless of restrictions further down -->
<acl type='all'>
<user>jabberd</user>
</acl>
<!-- These users can bind names other than their username -->
<!--
<acl type='bind'>
</acl>
-->
<!-- These users can bind a name as a default route -->
<!--
<acl type='default-route'>
<user>s2s</user>
</acl>
-->
<!-- These users can elect to receive all packets that pass through the router -->
<!--
<acl type='log'>
<user>msglog</user>
</acl>
-->
</aci>
</router>
<!-- Session manager configuration -->
<sm>
<!-- Our ID on the network. Users will have this as the domain part of
their JID. If you want your server to be accessible from other
Jabber servers, this ID must be resolvable by DNS.s
(default: localhost) -->
<id>yerevan.fxclub.org</id>
<!-- The process ID file. comment this out if you don't need to know
to know the process ID from outside the process (eg for control
scripts) -->
<pidfile>/var/jabberd/pid/sm-yerevan.pid</pidfile>
<!-- Router connection configuration -->
<router>
<!-- IP/port the router is waiting for connections on -->
<ip>127.0.0.1</ip> <!-- default: 127.0.0.1 -->
<port>5347</port> <!-- default: 5347 -->
<!-- Username/password to authenticate as -->
<user>jabberd</user> <!-- default: jabberd -->
<pass>*some pass*</pass> <!-- default: secret -->
<!-- File containing a SSL certificate and private key to use when
setting up an encrypted channel with the router. If this is
commented out, or the file can't be read, no attempt will be
made to establish an encrypted channel with the router. -->
<!--
<pemfile>/usr/local/etc/certs/jabberd.pem</pemfile>
-->
<!-- Router connection retry -->
<retry>
<!-- If the connection to the router can't be established at
startup, we should try again this many times before exiting.
Use -1 to retry indefinitely. [default: 3] -->
<init>5</init>
<!-- If we lost the connection to the router during normal
operation (ie we've successfully connected to the router in
the past), we should try to reconnect this many times before
exiting. Use -1 to retry indefinitely. [default: 3] -->
<lost>5</lost>
<!-- Sleep for this many seconds before trying attempting a
reconnect. [default: 2] -->
<sleep>2</sleep>
</retry>
</router>
<!-- Log configuration - type is "syslog", "file" or "stdout" -->
<log type='file'>
<!-- If logging to syslog, this is the log ident -->
<ident>jabberd/sm</ident>
<!-- If logging to syslog, this is the log facility
(local0 - local7) [default: local3] -->
<!-- <facility>local3</facility> -->
<!-- If logging to file, this is the filename of the logfile -->
<file>/var/jabberd/log/sm-yerevan.log</file>
</log>
<!-- Storage database configuration -->
<storage>
<!-- By default, we use the MySQL driver for all storage -->
<driver>db</driver>
<!-- Its also possible to explicitly list alternate drivers for
specific data types. -->
<!-- Store vcards in a PostgreSQL database instead -->
<!--
<driver type='vcard'>pgsql</driver>
-->
<!-- Berkeley DB driver configuration -->
<db>
<!-- Directory to store database files under -->
<path>/var/jabberd/db/yerevan</path>
<!-- Synchronize the database to disk after each write. If you
disable this, database accesses may be faster, but data may
be lost if jabberd crashes. -->
<sync/>
</db>
<!-- Oracle driver configuration -->
<oracle>
<!-- Database server host and port. -->
<host>localhost</host>
<port>1521</port>
<!-- Database name -->
<dbname>jabberd2</dbname>
<!-- Database username and password -->
<user>jabberd2</user>
<pass>secret</pass>
</oracle>
</storage>
<!-- Access control information -->
<aci>
<!-- The JIDs listed here will get access to all restricted
functions, regardless of restrictions further down -->
<acl type='all'>
<jid>[EMAIL PROTECTED]</jid>
</acl>
<!-- These JIDs can send broadcast messages (announce, motd) -->
<!--
<acl type='broadcast'>
<jid>[EMAIL PROTECTED]</jid>
<jid>[EMAIL PROTECTED]</jid>
</acl>
-->
<!-- These JIDs will receive messages addressed to the sm itself
(help requestes and such) -->
<!--
<acl type='messages'>
<jid>[EMAIL PROTECTED]</jid>
</acl>
-->
<!-- These JIDs can discover active user/session information -->
<!--
<acl type='disco'>
<jid>[EMAIL PROTECTED]</jid>
</acl>
-->
</aci>
<!-- Module chain configuration
Modules listed in a chain are called in the order specified at
the appropriate time for that chain (assuming that the module
knows how to work with that chain; otherwise it simply ignores
it).
Removing a module from these lists will stop the module being
called, even if its compiled into the server.
Serveral modules have a presence in more than one chain. It is
possible to remove a module from one chain but not others, but
this may cause strange behaviour. Make sure you know what you're
doing. -->
<modules>
<!-- sess-start. The modules in this chain are called when a session
is first started (usually on request by c2s as part of the
authentication process). This is normally used to load
per-session data. -->
<chain id='sess-start'/>
<!-- sess-end. The modules in this chain are called just before a
session is destroyed (after the client has disconnected). -->
<chain id='sess-end'>
<module>iq-last</module> <!-- update logout time -->
</chain>
<!-- in-sess. The modules in this chain are called when a packet
arrives from an active user session. Note that this chain is
also responsible for delivering packets to their destinations -
this is usually handled by the "deliver" module. -->
<chain id='in-sess'>
<module>validate</module> <!-- validate packet type -->
<module>privacy</module> <!-- manage privacy lists -->
<module>roster</module> <!-- handle roster get/sets and s10ns -->
<module>vacation</module> <!-- manage vacation settings -->
<module>iq-vcard</module> <!-- store and retrieve the user's vcard -->
<module>iq-private</module> <!-- manage the user's private data store -->
<module>disco</module> <!-- respond to agents requests from sessions -->
<module>offline</module> <!-- if we're coming online for the first time, deliver queued messages -->
<module>announce</module> <!-- deliver motd -->
<module>presence</module> <!-- process and distribute presence updates -->
<module>deliver</module> <!-- deliver packets with full jids directly -->
</chain>
<!-- out-sess. The modules in this chain are called just before a
packet is delivered to an active user session. -->
<chain id='out-sess'/>
<!-- in-router. The modules in this chain are called when a packet
arrives from the router (ie another component or s2s), but
before any processing is done. This is a good place to filter
incoming packets. -->
<chain id='in-router'>
<module>session</module> <!-- perform session actions as required by c2s -->
<module>validate</module> <!-- validate packet type -->
<module>presence</module> <!-- drop incoming presence if user not online -->
<module>privacy</module> <!-- filter incoming packets based on privacy rules -->
</chain>
<!-- out-router. The modules in this chain are called just before a
packet is delivered to the router (destined for another
component or s2s). This is a good place to filter outgoing
packets. -->
<chain id='out-router'>
<module>privacy</module> <!-- filter outgoing packets based on privacy rules -->
</chain>
<!-- pkt-sm. The modules in this chain are called when a packet
arrives that is addressed to the session manager itself (ie the
to JID has no node part). This is normally used to provide
session-manager-wide services (like service discovery). -->
<chain id='pkt-sm'>
<module>iq-last</module> <!-- return the server uptime -->
<module>iq-time</module> <!-- return the current server time -->
<module>iq-version</module> <!-- return the server name and version -->
<module>disco</module> <!-- build the disco list; respond to disco queries -->
<module>announce</module> <!-- send broadcast messages (announce, motd, etc) -->
<module>help</module> <!-- resend sm messages to administrators -->
<module>echo</module> <!-- echo messages sent to /echo -->
</chain>
<!-- pkt-user. The modules in this chain are called when a packet
arrives that is address to a specific user. Note that this
chain is also responsible for delivering packets to user
sessions as appropriate - this is usually handled by the
"deliver" module. -->
<chain id='pkt-user'>
<module>roster</module> <!-- handle s10n responses -->
<module>presence</module> <!-- process and distribute incoming presence from external entities -->
<module>iq-vcard</module> <!-- grab user vcards -->
<module>deliver</module> <!-- deliver the packet to an active session if we can -->
<module>vacation</module> <!-- send vacation messages -->
<module>offline</module> <!-- save messages and s10ns for later -->
<module>disco-publish</module> <!-- handle disco publishes; return information about user sessions -->
<module>iq-last</module> <!-- return time since last logout -->
</chain>
<!-- pkt-router. The modules in this chain are called when a
special-purpose packet arrives from the router (eg domain
advertisements). -->
<chain id='pkt-router'>
<module>session</module> <!-- take sessions offline their c2s disappears -->
<module>disco</module> <!-- query new components for service information -->
</chain>
<!-- user-load. The modules in this chain are called to load
per-user data. This will happen before a user can be used (ie
before a session is created). -->
<chain id='user-load'>
<module>active</module> <!-- get active status -->
<module>roster</module> <!-- load the roster and trust list -->
<module>privacy</module> <!-- load privacy lists -->
<module>disco-publish</module> <!-- load published information -->
<module>vacation</module> <!-- load vacation settings -->
</chain>
<!-- user-create. The modules in this chain are called when a user
creation request is received (usually from c2s as part of a
registration request). This initialises any per-user data. -->
<chain id='user-create'>
<module>active</module> <!-- activate new users -->
<module>template-roster</module> <!-- populate roster from template -->
</chain>
<!-- user-delete. The modules in this chain are called when a user
deletion request is received (usually from c2s as part of a
registration removal request). This deletes all data that may
have been previously created for the user during normal
operation. -->
<chain id='user-delete'>
<module>active</module> <!-- deactivate users -->
<module>announce</module> <!-- delete motd data -->
<module>disco-publish</module> <!-- delete published information -->
<module>offline</module> <!-- bounce queued messages -->
<module>privacy</module> <!-- delete privacy lists -->
<module>roster</module> <!-- delete roster -->
<module>vacation</module> <!-- delete vacation settings -->
<module>iq-last</module> <!-- delete last logout time -->
<module>iq-private</module> <!-- delete private data -->
<module>iq-vcard</module> <!-- delete vcard -->
</chain>
</modules>
<!-- Service discovery configuration -->
<discovery>
<!-- Service identity. these specify the category, type and name of
this service that will be included in discovery information
responses. -->
<identity>
<category>server</category> <!-- default: server -->
<type>im</type> <!-- default: im -->
<name>Jabber IM server</name> <!-- default: Jabber IM server -->
</identity>
<!-- The discovery module can respond to jabber:iq:agents queries
for compatibility with older clients. Comment this out to
disable this. -->
<agents/>
<!-- Static service list.
The discover module can discover disco-capable services
automatically as they come online. Most legacy services,
however, will not support discovery. In order to get them to
appear in disco/agents lists returned to the client, they
should be listed here.
Note that if a disco-capable service with the same name as one
listed below comes online, the information it provides will
override the information listed below.
The "category" and "type" attributes, and the list of supported
namespaces are only used for agents compatibility. If you have
disabled this above, you may omit them. -->
<items>
<!-- example entry for a user directory -->
<item category='service' type='jud' jid='jud.fxclub.org' name='FLJUD User Directory'/>
<!-- example entry for a groupchat (conference) service -->
<!--
<item category='conference' type='public' jid='conference.jabber.org' name='Text conferencing'/>
-->
</items>
</discovery>
<!-- User options -->
<user>
<!-- By default, users must explicitly created before they can start
a session. The creation process is usually triggered by a c2s
component in response to a client registering a new user.
Enableing this option will make it so that a user create will be
triggered the first time a non-existant user attempts to start
a session. This is useful if you already have users in an
external authentication database (eg LDAP) and you don't want
them to have to register. -->
<auto-create/>
<!-- Templates. If defined, the contents of these files will be
stored in the users data store when they are created. -->
<template>
<roster>/usr/local/etc/jabberd/templates/roster.xml</roster>
</template>
</user>
</sm>
_______________________________________________
Jabberd2 mailing list
[email protected]
http://lists.xiaoka.com/listinfo.cgi/jabberd2-xiaoka.com
