We have an FAQ item for this problem:
http://www.eclemma.org/jacoco/trunk/doc/faq.html
-marc
Why does the coverage report not show highlighted source code?
Make sure the following prerequisites are fulfilled to get source code
highlighting in JaCoCo coverage reports:
* Class files must be compiled with debug information to contain line
numbers.
* Source files must be properly supplied at report generation time.
I.e. specified source folders must be the direct parent of the
folders that define the Java packages.
On 16.07.14 11:16, kunal tayal wrote:
Hi marc,
now its not getting the link to source files
<classfiles>
<fileset
dir="C:\Xars_client\run\Xplorer\eclipse\plugins\com.xyz.xbot.importexport.tests_4.5.0.201407111823\com\xyz\xbot\importexport\tests"
>
</fileset>
</classfiles>
<sourcefiles encoding="UTF-8">
<fileset
dir="C:\Xars_client\run\Xplorer\eclipse\plugins\com.xyz.xbot.importexport.tests_4.5.0.201407111823\com\xyz\xbot\importexport\tests">
</fileset>
</sourcefiles>
"C:\Xars_client\run\Xplorer\eclipse\plugins\com.xyz.xbot.importexport.tests_4.5.0.201407111823\com\xyz\xbot\importexport\tests"
contains both java and class files. but in report m not linked to
source files.
Can u tell me whats going on ?
i tried include *.java too...that is also not working ..
On Wed, Jul 16, 2014 at 11:17 AM, kunal tayal <[email protected]
<mailto:[email protected]>> wrote:
Hi Marc
found out the issue...
changed the <classfiles> element from
<classfiles>
<fileset dir="${result.classes.dir}" >
</classfiles>
to
<classfiles>
<fileset dir="${result.classes.dir}" >
<include name="com.xyz.xide*.jar"/>
<include name="com.xyz.xide*/**/*.class"/>
<include name="com.xyz.xbot*/**/*.class"/>
</fileset>
</classfiles>
without <include> it was not able to take the .class and .jar
files recursively directly from dir ${result.classes.dir}.
Any ways thanks for your time !
-kunal
On Tue, Jul 15, 2014 at 9:07 PM, Marc R. Hoffmann
<[email protected] <mailto:[email protected]>>
wrote:
Hm, no useful information here. Can you please run your Ant
build with the -debug option to get more output about the problem?
Ths,
-marc
2rf
On 15.07.14 10:46, [email protected] <mailto:[email protected]>
wrote:
plz see the last line of the logs...line 64 is
<jacoco:report> tag mentioned earlier...
C:\Xars_client\run\Xplorer>ant -f run_test.xml run
-Declipse_home=C:\Xars_client
\run\xplorer\eclipse
-Dtest-classname=com.tensilica.xbot.importexport.tests.Expo
rtProjectsTest
-Dtest-pluginname=com.tensilica.xbot.importexport.tests
-Declipse
-rundir= C:\Xars_client\run\xplorer\eclipse
-Dtemp-workspace=C:\workspace_ws -Do
s=win32 -Dlog4j_output=c:\xars_client\run\logs
-Dxbotdir=C:\Xars_client\run\xplo
rer\eclipse\plugins -DwaitForEarlyStartup=true -Dws=win32
-DpluginCustomization=
S:\winWS\er_r.ini
-Dproject_dir="D:\Work\PerforceDepot\eagle_nest_ktayal\p4root\
other\xideregress\projects"
-Dlocalroot=C:\Xars_client\xen_dev\
Buildfile: C:\Xars_client\run\Xplorer\run_test.xml
suite:
init:
swtbot-test:
java-test:
[echo] ======================================
[echo] Running swtbot junit tests in
com.tensilica.xbot.importexport.tests.
ExportProjectsTest
[echo] Command line args are -application
org.eclipse.swtbot.eclipse.ju
nit4.headless.swtbottestapplication -product
com.tensilica.xide.xplorer_ce
-testApplication org.eclipse.ui.ide.workbench -data
C:\workspace_ws forma
tter=org.apache.tools.ant.taskdefs.optional.junit.XMLJUnitResultFormatter,C:\Xar
s_client\run\xplorer\eclipse/com.tensilica.xbot.importexport.tests.ExportProject
sTest.xml
formatter=org.apache.tools.ant.taskdefs.optional.junit.PlainJUnitResul
tFormatter -testPluginName
com.tensilica.xbot.importexport.tests -classNam
e com.tensilica.xbot.importexport.tests.ExportProjectsTest
-os win32 -ws w
in32 -arch x86 -consoleLog -debug -showLocation
-pluginCustomization
S:/winWS/er_r.ini --discover ${extraXXargs}
[echo] JVM args are
-Dxbot.pluginsdir=C:\Xars_client\run\xplorer\eclipse\pl
ugins -Dtools_dir=${toolsdir} -Dtools=${tools}
-Dproject_dir=D:\Work\Perfor
ceDepot\eagle_nest_ktayal\p4root\other\xideregress\projects
-Dtie_dir=${tiedir}
-Dtest_count=1 -Dtemp_dir=${tempdir}
-Dlocalroot=C:\Xars_client\xen_dev\
-Dorg.eclipse.ui.testsWaitForEarlyStartup=true
-Dlog4j_output=c:\xars_cli
ent\run\logs
[echo] JUnit Result File:
C:\Xars_client\run\xplorer\eclipse/results/com.te
nsilica.xbot.importexport.tests.ExportProjectsTest.xml.
[echo] Console output File:
C:\Xars_client\run\xplorer\eclipse/results/com.
tensilica.xbot.importexport.tests.ExportProjectsTest.txt.
[echo] ======================================
[jacoco:coverage] Enhancing java with coverage
[echo] ======================================
[echo] If you see errors above please see the file
C:\Xars_client\run\xplor
er\eclipse/results/com.tensilica.xbot.importexport.tests.ExportProjectsTest.txt
for more information.
[echo] Errors are generally caused by missing or
incorrect dependencies.
[echo] ======================================
collect-results:
[move] Warning:
C:\Xars_client\run\xplorer\eclipse\screenshots does not exi
st.
[xslt] Transforming into
C:\Xars_client\run\xplorer\eclipse\results
[xslt] Processing
C:\Xars_client\run\xplorer\eclipse\results\com.tensilica.
xbot.importexport.tests.ExportProjectsTest.xml to
C:\Xars_client\run\xplorer\ecl
ipse\results\com.tensilica.xbot.importexport.tests.ExportProjectsTest.html
[xslt] Loading stylesheet
C:\Xars_client\run\xplorer\eclipse\plugins\org.ec
<http://org.ec>
lipse.swtbot.eclipse.junit4.headless_2.0.5.20111003_1754-3676ac8-dev-e36\JUNIT.X
SL
report:
[jacoco:report] Loading execution data file
C:\Xars_client\run\jacoco_results\ja
coco.exec
BUILD FAILED
C:\Xars_client\run\Xplorer\run_test.xml:64: Error while
creating report
Total time: 1 minute 27 seconds
On Tuesday, 15 July 2014 13:31:20 UTC+5:30, Marc R.
Hoffmann wrote:
What is the full error message please?
Best regards,
-marc
On 15.07.14 09:47, [email protected]
<mailto:[email protected]> wrote:
Hi guys ,
I am new to java and this plugin :)
I am having the complete build/compiled java
code with me for swtbot tests. Now i want to see
what all code/features has been covered from these
tests. So tried to use the ant tasks of jacoco
mentioned at
http://www.eclemma.org/jacoco/trunk/doc/ant.html
and referenced
http://www.eclemma.org/jacoco/trunk/doc/examples/build/build.xml
too.
when i am giving the report target as
<target name="report" depends="suite">
<!-- Step 3: Create coverage
report -->
<jacoco:report>
<!-- This task needs the
collected execution data and ... -->
<executiondata>
<file
file="${result.exec.file}" />
</executiondata>
<!-- the class files and
optional source files ... -->
<structure name="JaCoCo
report">
<classfiles>
<fileset dir="${result.classes.dir}" />
</classfiles>
</structure>
<!-- to produce reports in
different formats. -->
<html
destdir="${result.report.dir}" />
<csv
destfile="${result.report.dir}/report.csv" />
<xml
destfile="${result.report.dir}/report.xml" />
</jacoco:report>
</target>
and coverage as
<jacoco:coverage destfile="${result.exec.file}">
<java fork="true" dir="."
timeout="${timeout}" jvm="${jvm}" logError="true"
classname="org.eclipse.core.launcher.Main"
output="${junit-report-output}/${classname}.txt">
<classpath>
<fileset dir="${eclipse-home}/plugins">
<include name="org.eclipse.equinox.launcher_*.jar" />
</fileset>
</classpath>
<arg
line="${launcher-arg-line}" />
<jvmarg
line="${jvm-arg-line}" />
<sysproperty
key="PLUGIN_PATH" value="${plugin-path}" />
</java>
</jacoco:coverage>
where ${result.classes.dir} (i.e.
${eclipse-home}/plugins) points to my already
compiled code directory containing many .class and
.jar under different folders.
.exec and index.html and .session.html files are
getting generated but result is not correct and
command prompt it shows
BUILD FAILED : Error while creating report.
. It is not listing all the classes and
.sessions.html lists many classes but with no
links to direct to that class and see the executed
methods .
And when i run the EclEmma eclipse plugin from
eclipse and run and see the result there then that
it is working absolutely fine.
So i am just wandering what is missing in case of
ant tasks ?
--
You received this message because you are subscribed to a
topic in the Google Groups "JaCoCo and EclEmma Users" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/jacoco/AqidzHPR4f8/unsubscribe.
To unsubscribe from this group and all its topics, send an
email to [email protected]
<mailto:jacoco%[email protected]>.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google
Groups "JaCoCo and EclEmma Users" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected]
<mailto:[email protected]>.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "JaCoCo
and EclEmma Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
