On 2017-02-13 16:44, Claudio Scordino wrote:
> Dear all,
> 
> after a while using Jailhouse on 4.09 on TX1, I came back to the stock
> Nvidia kernel since (as far as I've understood) X is not yet fully
> supported when using the free GPU driver, and I'd like to setup a
> demonstrator with graphics over Jailhouse.
> 
> When enabling Jailhouse on the 3.10 kernel I've got these errors on dmesg.
> Jailhouse didn't print any error message on the serial console.
> The system seems fully functional most of the times, even using X (the
> system crashed only once)
> 
> I've progressively increased the address spaces for the root cell in the
> hope of resolving the possible conflict, but without success (the root
> cell now has access to almost the whole address space).
> 
> Can you help me in figuring out what this problem could be related to ?

The driver that throws this error is not even upstream - hard to tell
what is going on there without NVIDIA people explaining the background.

Jan

>  
> Many thanks and best regards,
> 
>              Claudio
> 
> 
> [   68.271660] mc-err: (255) csw_mpcorew: GSC access violation
> [   68.271672] mc-err:   status = 0x75010039; addr = 0xff300000
> [   68.271681] mc-err:   secure: no, access-type: write, SMMU fault: none
> [   68.271726] mc-err: (255) csr_mpcorer: GSC access violation
> [   68.271732] mc-err:   status = 0x75046027; addr = 0xff321f80
> [   68.271738] mc-err:   secure: no, access-type: read, SMMU fault: none
> [   68.271778] mc-err: (255) csr_mpcorer: GSC access violation
> [   68.271784] mc-err:   status = 0x75005027; addr = 0xff339b40
> [   68.271789] mc-err:   secure: no, access-type: read, SMMU fault: none
> [   68.271829] mc-err: (255) csr_mpcorer: GSC access violation
> [   68.271834] mc-err:   status = 0x75046027; addr = 0xff350f80
> [   68.271839] mc-err:   secure: no, access-type: read, SMMU fault: none
> [   68.271878] mc-err: Too many MC errors; throttling prints
> [   68.273213] ------------[ cut here ]------------
> [   68.273224] WARNING: at drivers/platform/tegra/mc/mcerr.c:262
> tegra_mc_error_thread+0xa0/0x474()
> [   68.273227] Unknown error! intr sig: 0x00020100
> [   68.273230] Modules linked in: jailhouse(O) bnep bcmdhd cfg80211
> bluedroid_pm
> [   68.273244] CPU: 1 PID: 34 Comm: irq/109-mc_stat Tainted: G          
> O 3.10.96cloud #11
> [   68.273248] Call trace:
> [   68.273255] [<ffffffc000089b84>] dump_backtrace+0x0/0xf4
> [   68.273259] [<ffffffc000089e78>] show_stack+0x14/0x1c
> [   68.273265] [<ffffffc000325b60>] dump_stack+0x20/0x28
> [   68.273270] [<ffffffc0000a5190>] warn_slowpath_common+0x78/0x9c
> [   68.273274] [<ffffffc0000a5204>] warn_slowpath_fmt+0x50/0x58
> [   68.273279] [<ffffffc00084df3c>] tegra_mc_error_thread+0xa0/0x474
> [   68.273285] [<ffffffc000121360>] irq_thread_fn+0x28/0x4c
> [   68.273289] [<ffffffc00012160c>] irq_thread+0x80/0xdc
> [   68.273294] [<ffffffc0000d0150>] kthread+0xc0/0xc8
> [   68.273297] ---[ end trace 69316f5a53a3a15c ]---
> [   68.273426] ------------[ cut here ]------------
> [   68.273431] WARNING: at drivers/platform/tegra/mc/mcerr.c:262
> tegra_mc_error_thread+0xa0/0x474()
> [   68.273434] Unknown error! intr sig: 0x00020100
> [   68.273437] Modules linked in: jailhouse(O) bnep bcmdhd cfg80211
> bluedroid_pm
> [   68.273448] CPU: 1 PID: 34 Comm: irq/109-mc_stat Tainted: G        W
>  O 3.10.96cloud #11
> [   68.273450] Call trace:
> [   68.273454] [<ffffffc000089b84>] dump_backtrace+0x0/0xf4
> [   68.273458] [<ffffffc000089e78>] show_stack+0x14/0x1c
> [   68.273461] [<ffffffc000325b60>] dump_stack+0x20/0x28
> [   68.273466] [<ffffffc0000a5190>] warn_slowpath_common+0x78/0x9c
> [   68.273470] [<ffffffc0000a5204>] warn_slowpath_fmt+0x50/0x58
> [   68.273474] [<ffffffc00084df3c>] tegra_mc_error_thread+0xa0/0x474
> [   68.273478] [<ffffffc000121360>] irq_thread_fn+0x28/0x4c
> [   68.273482] [<ffffffc00012160c>] irq_thread+0x80/0xdc
> [   68.273486] [<ffffffc0000d0150>] kthread+0xc0/0xc8
> [   68.273489] ---[ end trace 69316f5a53a3a15d ]---
> [   68.273617] ------------[ cut here ]------------
> [   68.273622] WARNING: at drivers/platform/tegra/mc/mcerr.c:262
> tegra_mc_error_thread+0xa0/0x474()
> [   68.273625] Unknown error! intr sig: 0x00020100
> [   68.273627] Modules linked in: jailhouse(O) bnep bcmdhd cfg80211
> bluedroid_pm
> [   68.273638] CPU: 1 PID: 34 Comm: irq/109-mc_stat Tainted: G        W
>  O 3.10.96cloud #11
> [   68.273641] Call trace:
> [   68.273645] [<ffffffc000089b84>] dump_backtrace+0x0/0xf4
> [   68.273648] [<ffffffc000089e78>] show_stack+0x14/0x1c
> [   68.273652] [<ffffffc000325b60>] dump_stack+0x20/0x28
> [   68.273656] [<ffffffc0000a5190>] warn_slowpath_common+0x78/0x9c
> [   68.273660] [<ffffffc0000a5204>] warn_slowpath_fmt+0x50/0x58
> [   68.273664] [<ffffffc00084df3c>] tegra_mc_error_thread+0xa0/0x474
> [   68.273668] [<ffffffc000121360>] irq_thread_fn+0x28/0x4c
> [   68.273672] [<ffffffc00012160c>] irq_thread+0x80/0xdc
> [   68.273676] [<ffffffc0000d0150>] kthread+0xc0/0xc8
> [   68.273679] ---[ end trace 69316f5a53a3a15e ]---
> [   68.273741] ------------[ cut here ]------------
> 
> 
> -- 
> You received this message because you are subscribed to the Google
> Groups "Jailhouse" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to [email protected]
> <mailto:[email protected]>.
> For more options, visit https://groups.google.com/d/optout.

-- 
Siemens AG, Corporate Technology, CT RDA ITP SES-DE
Corporate Competence Center Embedded Linux

-- 
You received this message because you are subscribed to the Google Groups 
"Jailhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to