> Needs to be 0 for INTx operation. OK, when I remove '.num_msix_vectors = 1' from the root cell configuration, I can see the following in '/var/log/messages': [ 69.760313] PCI host bridge //vpci@0 ranges: [ 69.764807] MEM 0x02100000..0x02101fff -> 0x02100000 [ 69.774477] pci-host-generic 2000000.vpci: PCI host bridge to bus 0000:00 [ 69.781428] pci_bus 0000:00: root bus resource [bus 00] [ 69.786705] pci_bus 0000:00: root bus resource [mem 0x02100000-0x02101fff] [ 69.793830] pci_bus 0000:00: scanning bus [ 69.794718] pci 0000:00:00.0: [1af4:1110] type 00 class 0xff0000 [ 69.794815] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x000000ff 64bit] [ 69.794981] pci 0000:00:00.0: calling pci_fixup_ide_bases+0x0/0x50 [ 69.797231] pci_bus 0000:00: fixups for bus [ 69.797283] PCI: bus0: Fast back to back transfers disabled [ 69.803007] pci_bus 0000:00: bus scan returning with max=00 [ 69.803343] pci 0000:00:00.0: fixup irq: got 124 [ 69.803363] pci 0000:00:00.0: assigning IRQ 124 [ 69.803433] pci 0000:00:00.0: BAR 0: assigned [mem 0x02100000-0x021000ff 64bit] [ 69.813181] uio_ivshmem 0000:00:00.0: enabling device (0000 -> 0002) [ 69.819791] uio_ivshmem 0000:00:00.0: using jailhouse mode [ 69.825511] uio_ivshmem 0000:00:00.0: regular IRQs [ 69.836988] The Jailhouse is opening.
How does this IRQ number correlate to the INTx I should be using when generating interrupts from the bare-metal inmate to the root-cell? Does the uio_ivshmem driver take care of generating interrupts from the root-cell to the bare metal cell, or do I need to modify this as well? Slightly confused - Jonas -- You received this message because you are subscribed to the Google Groups "Jailhouse" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
