2018-03-07 18:27 GMT+01:00 Jan Kiszka <jan.kis...@siemens.com>:
> On 2018-03-07 10:13, Claudio Scordino wrote:
> > Initial support for the NXP IMX8 evaluation board.
> > Peng Fang (4):
> > imx8mq: add UART support
> > imx8mq: ignore SIP for low-power modes
> > Cell configs for imx8mq EVK board.
> > README: support for NXP IMX8
> > README.md | 2 +
> > configs/arm64/imx8mq-gic-demo.c | 56 +++++++++++++
> > configs/arm64/imx8mq.c | 108
> > hypervisor/arch/arm-common/Kbuild | 2 +-
> > hypervisor/arch/arm-common/dbg-write.c | 2 +
> > hypervisor/arch/arm-common/include/asm/psci.h | 3 +
> > hypervisor/arch/arm-common/include/asm/uart.h | 2 +-
> > hypervisor/arch/arm-common/uart-imx.c | 39 ++++++++++
> > hypervisor/arch/arm64/traps.c | 12 ++-
> > include/jailhouse/cell-config.h | 1 +
> > inmates/lib/arm-common/Makefile.lib | 2 +-
> > inmates/lib/arm-common/include/uart.h | 1 +
> > inmates/lib/arm-common/printk.c | 2 +
> > inmates/lib/arm-common/uart-imx.c | 63 +++++++++++++++
> > inmates/lib/arm64/include/mach.h | 12 +++
> > 15 files changed, 301 insertions(+), 6 deletions(-)
> > create mode 100644 configs/arm64/imx8mq-gic-demo.c
> > create mode 100644 configs/arm64/imx8mq.c
> > create mode 100644 hypervisor/arch/arm-common/uart-imx.c
> > create mode 100644 inmates/lib/arm-common/uart-imx.c
> Some comments on patch 2, rest looks good on first glance.
Good. Going to re-submit soon based on next.
> Thanks for sharing early! Too bad I didn't find the live demo at
> Embedded World last week...
Ouch! Besides the x86-based demo at our own booth, we had prepared two
additionals demos based on Jailhouse:
- One at the NXP booth on a imx8 board by SECO, with the RTOS driving a
DC motor and Linux showing the speed through a Qt application
- One at the Lauterbach booth on a Ultrascale+ board, with the TRACE32
tracing information of both the Linux and the RTOS inmates
Considering the effort in preparing such demos, it's a shame if they
haven't respected the promises and haven't shown the demos for all 3 days
You received this message because you are subscribed to the Google Groups
To unsubscribe from this group and stop receiving emails from it, send an email
For more options, visit https://groups.google.com/d/optout.