Just confirmed that the UART in the v0.9.1 worked with Erika and vPCI devices on arm64.
Thanks! Giovani > Hi Ralf, > > Yes, you are right. I cloned the master branch. > > I downloaded this one > (https://github.com/siemens/jailhouse/archive/v0.9.1.tar.gz). Will test and > get back to you. > > Giovani > > > Hi Giovani, > > > > On 08/09/2018 10:26 PM, Giovani Gracioli wrote: > > > Hello, > > > > > > I was using Jailhouse version 0.8 with Erika on the ultrascale+ platform. > > > > > > I migrated to version 0.9.1, but there is no printing on the UART after I > > > start the Erika cells. > > > > Umm... Did you migrate to 0.9.1 or to master/next? 0.9.1 doesn't contain > > the patches where I changed the UART config format, so I guess you > > migrated to master or next. > > > > > > > > When I run the gic-demo with the zynqmp-zcu102-gic-demo.cell, UART works > > > fine. > > > > Which means that the UART is basically functional, and Jailhouse inmates > > still use it correctly. > > > > > > > > I attached both the root and non-root configurations. > > > > > > Something related with UART has changed between the versions that is not > > > handled anymore by Erika or is it a config problem? > > > > Regarding external non-Jailhouse inmates, nothing has changed. The new > > format just adds information of the UART device to the communication region. > > > > If there's really a commit between 0.8..next/0.9.1 that introduces some > > change that causes your problem, you should be able to find it with git > > bisect. > > > > HTH > > Ralf > > > > > > > > Best regards, > > > Giovani > > > -- You received this message because you are subscribed to the Google Groups "Jailhouse" group. To unsubscribe from this group and stop receiving emails from it, send an email to jailhouse-dev+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.