Le samedi 9 février 2019 06:26:29 UTC+1, [email protected] a écrit : > On Friday, February 8, 2019 at 8:40:18 AM UTC-7, Henning Schild wrote: > > Am Thu, 7 Feb 2019 16:53:41 -0800 > > schrieb <michael.***@gmail.com>: > > > > > On Wednesday, February 6, 2019 at 5:59:09 AM UTC-7, Henning Schild > > > wrote: > > > > Am Tue, 5 Feb 2019 19:25:28 -0800 > > > > schrieb <michael.***@gmail.com>: > > > > > > > > > On Friday, February 1, 2019 at 12:32:40 AM UTC-7, J. Kiszka > > > > > wrote: > > > > > > You likely want > > > > > > https://github.com/siemens/linux/commits/jailhouse-enabling/4.14 > > > > > > or the 4.19-variant that is jailhouse-prepared. That's what > > > > > > jailhouse-images is building for you. If you just rebuild the > > > > > > kernel that the original image was using, only adding UIO, you > > > > > > should be fine with keeping the jailhouse kernel package > > > > > > untouched. But the cleanest way is reproducing the image via > > > > > > jailhouse-images after adjusting the parameter you want to > > > > > > change (CONFIG_UIO, ROOTFS_EXTRA etc.). > > > > > > > > > > > > Jan > > > > > > > > > > > > -- > > > > > > Siemens AG, Corporate Technology, CT RDA IOT SES-DE > > > > > > Corporate Competence Center Embedded Linux > > > > > > > > > > That worked! I was able to figure out the correct kernel to build > > > > > by looking at > > > > > jailhouse-images/recipes-kernel/linux/linux-jailhouse.bb from > > > > > when I last generated my image at 4.14.73 > > > > > (https://github.com/siemens/linux/archive/1dd68658b3a8308a160b0786fc4e1e04d8ff5216.tar.gz). > > > > > With that, I supplied QEMU with the new UIO-enabled kernel image > > > > > and built jailhouse and uio_ivshmem.ko and ran the ivshmem > > > > > jailhouse demo. > > > > > > > > > > However, I'm still not sure how to read in the data from the > > > > > ivshmem-demo. Once I insmod uio_ivshmem.ko, shouldn't there be a > > > > > device called /dev/uio0 that I can read "Hello From IVSHMEM" from > > > > > and write back to? And shouldn't there be an entry > > > > > in /sys/class/uio/? I don't see either of these, and I'm not > > > > > quite sure how to debug this yet. > > > > > > > > Yes you should get that. If you do not, my first guess would be that > > > > you are not building the jailhouse branch of the guest-code repo. > > > > The jailhouse version of the PCI interface is slightly different, > > > > so the probing between the two is not compatible. > > > Shouldn't I see /dev/uio0 and /sys/class/uio/ once I `insmod` it, > > > regardless if it's built against a non-jailhouse-enabled kernel? Or > > > will it show up once jailhouse is running? > > > > I am not actually sure what will happen, so if a /dev/uio0 will pop up > > even if probing failed. > > Just to clarify, i did not talk about a jailhouse enabled kernel, i > > talked about checking out the jailhouse branch of the repo you got the > > uio driver from. The one from branch "master" will not work! > > Thanks! That's just what I needed. I didn't realize that there was a > jailhouse branch. I rebuilt it, /dev/uio0 shows up, and the ivshmem-demo is > working! uio_read and shmem_test.py (README.jailhouse) both work great. > > But unfortunately uio_send doesn't. When I run `uio_send /dev/uio0 1 0 0`, it > fails to mmap() with an ENODEV/"No such device" error. The mmap man page says > "the underlying filesystem of the specified file does not support memory > mapping." > > Do you know why this is? Isn't uio_send just trying to mmap() the PCI config > space (the first 256 bytes)? > > Thanks, > -Michael > > > > > Henning > > > > > When I `make` uio_ivshmem, it shows that it's entering the correct > > > kernel source. Is https://github.com/siemens/linux/commit/1dd68658b > > > not the correct jailhouse-enabled source to build for 4.14.73? > > > > > > Does making all the UIO modules be built-in (Y) instead of (M) make > > > any difference? I set them to Y because I thought it would make > > > things easier. > > > > > > I may consider upgrading jailhouse images to the latest if I can't > > > get things working. > > > > > > Thanks, > > > Michael > > > > > > > > Henning > > > > > > > > > The only documentation I can find on this is > > > > > https://www.kernel.org/doc/html/v4.18/driver-api/uio-howto.html. > > > > > > > > > > Any help is appreciated. Sorry to be a bother. Thanks! > > > > > -Michael > > > > > > > >
Hi Michael, I am in the same situation as you with the "no such device" during the mmap. Were you able to solve your problem? If so, how? Best regards, Jeanne -- You received this message because you are subscribed to the Google Groups "Jailhouse" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jailhouse-dev/6b032366-4973-48ee-bb6d-eeb9a8f8af0a%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
