What i see with cat /proc/iomem is the same as the root cell, so i must not
be connecting properly, do you have a hint of what might be incorrect?
I noticed that after issuing that command, there was still no TX/RX bytes
transmitted through the virtual interface,
eth0 Link encap:Ethernet HWaddr 86:A0:B7:4C:68:15
inet addr:10.10.70.3 Bcast:10.255.255.255 Mask:255.0.0.0
UP BROADCAST RUNNING MULTICAST MTU:16384 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
terça-feira, 27 de Agosto de 2019 às 10:34:25 UTC+1, Jan Kiszka escreveu:
>
> On 26.08.19 20:09, João Reis wrote:
> > I am using inmate-zynqmp.dtb for non-root cell, which is not being used
> by root
> > cell. Or are you referring to Petalinux's device tree? In that case,
> what nodes
> > must i alter? The memory node?
> >
>
> If you are already using the inmate dtb, you won't see most of the
> resources in
> /proc/iomem that you have in the root cell - or you are still looking at
> the
> root cell. This is what you get normally in the inmate with uart access
> (taken
> on ultra96):
>
> # cat /proc/iomem
> 10000000-1000ffff : pci@fc000000
> 10000000-100000ff : 0000:00:00.0
> 10000000-100000ff : ivshmem-net
> 74000000-7beeffff : System RAM
> 74000000-74000fff : reserved
> 74280000-7509ffff : Kernel code
> 750a0000-751bffff : reserved
> 751c0000-75368fff : Kernel data
> 7638a000-76b5cfff : reserved
> 79c00000-7bbfffff : reserved
> 7bead000-7bed8fff : reserved
> 7bedb000-7bedcfff : reserved
> 7bedd000-7beddfff : reserved
> 7bede000-7bee1fff : reserved
> 7bee2000-7bee3fff : reserved
> 7bee4000-7beeffff : reserved
> 7bf00000-7bffffff : ivshmem-net
> fc000000-fc0fffff : PCI ECAM
> ff010000-ff010fff : xuartps
>
> Jan
>
> --
> Siemens AG, Corporate Technology, CT RDA IOT SES-DE
> Corporate Competence Center Embedded Linux
>
--
You received this message because you are subscribed to the Google Groups
"Jailhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/jailhouse-dev/4a855b24-4638-4349-93a8-72366bc248be%40googlegroups.com.
