On 10.11.21 17:58, Moustafa Nofal wrote: > I am not sure, if I should answer to this, but this can be solved by > recompiling Linux headers with editing kernel configuration: > add CONFIG_HOTPLUG_CPU=y >
Yes, that is a precondition and likely explains the build error. > this would help your problem, and jailhouse might work, but you might > face a problem of Jailhouse adding no virtual devices. You can check > this by lspci before and after jailhouse enable command. > > I have one question regarding your 5.10 kernel. I tried compiling it on > 5.10, but I had different error, so I was using 5.3 and had no PCI > devices, then upgraded to 5.4 and I got back the PCI devices, but as I > said Jailhouse still cannot add virtual PCI device In general, reference configurations (kernel, jailhouse) and integrations can be found in jailhouse-images. Deriving from there is simpler than starting from scratch. Jan -- Siemens AG, T RDA IOT Corporate Competence Center Embedded Linux -- You received this message because you are subscribed to the Google Groups "Jailhouse" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jailhouse-dev/43bd55d7-a77f-b979-102c-a947f07b8273%40siemens.com.
