Hi Peng, Any input from your end?
Thanks & Regards, Vipul Kumar On Tuesday, May 31, 2022 at 1:00:42 AM UTC+5:30 [email protected] wrote: > Hi, > > I am trying to load & bootup 2nd linux image in non-root cell of jailhouse. > I could port jailhouse 0.12 in kernel 5.4.147 . Flashed the image in SD > card & emmc of i.MX8. Initiated SD card image with command "run jh_mmcboot" > & could load jailhouse driver also. emmc has mmcblk0 & sd card has mmcblk1, > mounted mmcblk1p1 & mmcblkip2 manually. > > After driver is up used below commands: > > *jailhouse enable /usr/share/jailhouse/cells/imx8mq.cell* > > *export PATH=$PATH:/usr/share/jailhouse/tools/* > > * jailhouse cell linux /usr/share/jailhouse/cells/imx8mq-linux-demo.cell > /run/media/mmcblk1p1/Image -d /run/media/mmcblk1p1/imx8mq-evk-inmate.dtb -c > "clk_ignore_unused console=ttymxc0,115200 > earlycon=ec_imx6q,0x30860000,115200 root=/dev/mmcblk2p2 rootwait rw"* > > 2nd image not booting up, below are the logs: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > *root=/dev/mmcblk2p2 rootwait rw"mxc0,115200 > earlycon=ec_imx6q,0x30860000,115200[ 2102.362388] IRQ232: set affinity > failed(-22).[ 2102.362464] CPU2: shutdown[ 2102.369562] psci: CPU2 killed > (polled 0 ms)[ 2102.422343] IRQ232: set affinity failed(-22).[ 2102.422642] > CPU3: shutdown[ 2102.429741] psci: CPU3 killed (polled 0 ms)Adding virtual > PCI device 00:00.0 to cell "linux-inmate-demo"Shared memory connection > established, peer cells: "imx8mq"Adding virtual PCI device 00:01.0 to cell > "linux-inmate-demo"Shared memory connection established, peer > cells: "imx8mq"Created cell "linux-inmate-demo"Page pool usage after cell > creation: mem 80/992, remap 144/131072[ 2102.486660] Created Jailhouse cell > "linux-inmate-demo"Cell "linux-inmate-demo" can be loadedStarted cell > "linux-inmate-demo"[ 0.000000] Booting Linux on physical CPU > 0x0000000002 [0x410fd034][ 0.000000] Linux version 5.4.147+gbbb2e2b > (oe-user@oe-host) (gcc version 9.3.0 (GCC)) #1 SMP PREEMPT Wed Dec 1 > 22:21:40 UTC 2021[ 0.000000] Machine model: Freescale i.MX8MQ EVK[ > 0.000000] earlycon: ec_imx6q0 at MMIO 0x0000000030860000 (options > '115200')[ 0.000000] printk: bootconsole [ec_imx6q0] enabled[ > 0.000000] efi: Getting EFI parameters from FDT:[ 0.000000] efi: UEFI > not found.[ 0.000000] cma: Reserved 320 MiB at > 0x00000000e8000000imx8mqevk:/dev# [ 0.000000] NUMA: No NUMA > configuration found[ 0.000000] NUMA: Faking a node at [mem > 0x00000000c0000000-0x00000000fdbfffff][ 0.000000] NUMA: NODE_DATA [mem > 0xfda0e500-0xfda0ffff][ 0.000000] Zone ranges:[ 0.000000] DMA32 > [mem 0x00000000c0000000-0x00000000fdbfffff][ 0.000000] Normal > empty[ 0.000000] Movable zone start for each node[ 0.000000] Early > memory node ranges[ 0.000000] node 0: [mem > 0x00000000c0000000-0x00000000fdbfffff][ 0.000000] Initmem setup node 0 > [mem 0x00000000c0000000-0x00000000fdbfffff][ 0.000000] psci: probing for > conduit method from DT.[ 0.000000] psci: PSCIv1.1 detected in firmware.[ > 0.000000] psci: Using standard PSCI v0.2 function IDs[ 0.000000] > psci: MIGRATE_INFO_TYPE not supported.[ 0.000000] psci: SMC Calling > Convention v1.1[ 0.000000] percpu: Embedded 33 pages/cpu s98072 r8192 > d28904 u135168[ 0.000000] Detected VIPT I-cache on CPU0[ 0.000000] > CPU features: detected: ARM erratum 845719[ 0.000000] CPU features: > detected: GIC system register CPU interface[ 0.000000] Built 1 > zonelists, mobility grouping on. Total pages: 248976[ 0.000000] Policy > zone: DMA32[ 0.000000] Kernel command line: clk_ignore_unused > console=ttymxc0,115200 earlycon=ec_imx6q,0x30860000,115200 > root=/dev/mmcblk2p2 rootwait rw[ 0.000000] Dentry cache hash table > entries: 131072 (order: 8, 1048576 bytes, linear)[ 0.000000] Inode-cache > hash table entries: 65536 (order: 7, 524288 bytes, linear)[ 0.000000] > mem auto-init: stack:off, heap alloc:off, heap free:off[ 0.000000] > Memory: 632620K/1011712K available (17212K kernel code, 2074K rwdata, 7068K > rodata, 3712K init, 1034K bss, 51412K reserved, 327680K cma-reserved)[ > 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1[ > 0.000000] rcu: Preemptible hierarchical RCU implementation.[ 0.000000] > rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.[ > 0.000000] Tasks RCU enabled.[ 0.000000] rcu: RCU calculated value of > scheduler-enlistment delay is 25 jiffies.[ 0.000000] rcu: Adjusting > geometry for rcu_fanout_leaf=16, nr_cpu_ids=2[ 0.000000] NR_IRQS: 64, > nr_irqs: 64, preallocated irqs: 0[ 0.000000] GICv3: 128 SPIs > implemented[ 0.000000] GICv3: 0 Extended SPIs implemented[ 0.000000] > GICv3: Distributor has no Range Selector support[ 0.000000] GICv3: 16 > PPIs implemented[ 0.000000] GICv3: no VLPI support, no direct LPI > support[ 0.000000] GICv3: CPU0: found redistributor 2 region > 0:0x00000000388c0000[ 0.000000] ITS: No ITS available, not enabling > LPIs[ 0.000000] random: get_random_bytes called from > start_kernel+0x318/0x49c with crng_init=0[ 0.000000] arch_timer: cp15 > timer(s) running at 8.33MHz (virt).[ 0.000000] clocksource: > arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1ec0311ec, > max_idle_ns: 440795202152 ns[ 0.000004] sched_clock: 56 bits at 8MHz, > resolution 120ns, wraps every 2199023255541ns[ 0.008140] Console: colour > dummy device 80x25[ 0.012468] Calibrating delay loop (skipped), value > calculated using timer frequency.. 16.66 BogoMIPS (lpj=33333)[ 0.022663] > pid_max: default: 32768 minimum: 301[ 0.027337] LSM: Security Framework > initializing[ 0.031912] Smack: Initializing.[ 0.035152] Smack: IPv6 > port labeling enabled.[ 0.039717] Mount-cache hash table entries: 2048 > (order: 2, 16384 bytes, linear)[ 0.047061] Mountpoint-cache hash table > entries: 2048 (order: 2, 16384 bytes, linear)[ 0.056210] ASID allocator > initialised with 32768 entries[ 0.060340] rcu: Hierarchical SRCU > implementation.[ 0.065289] EFI services will not be available.[ > 0.069677] smp: Bringing up secondary CPUs ...[ 0.074490] Detected VIPT > I-cache on CPU1[ 0.074525] GICv3: CPU1: found redistributor 3 region > 0:0x00000000388e0000[ 0.074566] CPU1: Booted secondary processor > 0x0000000003 [0x410fd034][ 0.074660] smp: Brought up 1 node, 2 CPUs[ > 0.095498] SMP: Total of 2 processors activated.[ 0.100182] CPU > features: detected: 32-bit EL0 Support[ 0.105318] CPU features: > detected: CRC32 instructions[ 0.120795] CPU: All CPU(s) started at EL1[ > 0.122044] alternatives: patching kernel code[ 0.127762] devtmpfs: > initialized[ 0.131440] clocksource: jiffies: mask: 0xffffffff > max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns[ 0.139498] > futex hash table entries: 512 (order: 3, 32768 bytes, linear)[ 0.155615] > pinctrl core: initialized pinctrl subsystem[ 0.158617] DMI not present > or invalid.[ 0.162081] NET: Registered protocol family 16[ 0.173481] > DMA: preallocated 256 KiB pool for atomic allocations[ 0.176737] audit: > initializing netlink subsys (disabled)[ 0.182242] audit: type=2000 > audit(0.136:1): state=initialized audit_enabled=0 res=1[ 0.189855] > cpuidle: using governor menu[ 0.194092] hw-breakpoint: found 6 > breakpoint and 4 watchpoint registers.[ 0.200888] Serial: AMBA PL011 > UART driver[ 0.204654] imx mu driver is registered.[ 0.208501] imx > rpmsg driver is registered.[ 0.231076] HugeTLB registered 1.00 GiB page > size, pre-allocated 0 pages[ 0.234931] HugeTLB registered 32.0 MiB page > size, pre-allocated 0 pages[ 0.241608] HugeTLB registered 2.00 MiB page > size, pre-allocated 0 pages[ 0.248291] HugeTLB registered 64.0 KiB page > size, pre-allocated 0 pages[ 0.256007] cryptd: max_cpu_qlen set to 1000[ > 0.261848] ACPI: Interpreter disabled.[ 0.263391] iommu: Default > domain type: Translated[ 0.268086] vgaarb: loaded[ 0.270905] SCSI > subsystem initialized[ 0.274698] usbcore: registered new interface > driver usbfs[ 0.279826] usbcore: registered new interface driver hub[ > 0.285127] usbcore: registered new device driver usb[ 0.290446] mc: > Linux media interface: v0.10[ 0.294407] videodev: Linux video capture > interface: v2.00[ 0.299922] pps_core: LinuxPPS API ver. 1 registered[ > 0.304800] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo > Giometti <[email protected]>[ 0.313927] PTP clock support registered[ > 0.317874] EDAC MC: Ver: 3.0.0[ 0.321369] No BMan portals available![ > 0.324882] QMan: Allocated lookup table at (____ptrval____), entry count > 65537[ 0.332006] No QMan portals available![ 0.335746] No USDPAA > memory, no 'fsl,usdpaa-mem' in device-tree[ 0.341970] FPGA manager > framework[ 0.345172] Advanced Linux Sound Architecture Driver > Initialized.[ 0.351573] NetLabel: Initializing[ 0.354555] NetLabel: > domain hash size = 128[ 0.358877] NetLabel: protocols = UNLABELED > CIPSOv4 CALIPSO[ 0.364577] NetLabel: unlabeled traffic allowed by > default[ 0.370582] clocksource: Switched to clocksource > arch_sys_counter[ 1.126801] VFS: Disk quotas dquot_6.6.0[ 1.127914] > VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)[ > 1.134921] pnp: PnP ACPI: disabled[ 1.145678] thermal_sys: Registered > thermal governor 'step_wise'[ 1.145681] thermal_sys: Registered thermal > governor 'power_allocator'[ 1.149008] NET: Registered protocol family 2[ > 1.159787] IP idents hash table entries: 16384 (order: 5, 131072 bytes, > linear)[ 1.167659] tcp_listen_portaddr_hash hash table entries: 512 > (order: 1, 8192 bytes, linear)[ 1.175430] TCP established hash table > entries: 8192 (order: 4, 65536 bytes, linear)[ 1.183185] TCP bind hash > table entries: 8192 (order: 5, 131072 bytes, linear)[ 1.190453] TCP: > Hash tables configured (established 8192 bind 8192)[ 1.196747] UDP hash > table entries: 512 (order: 2, 16384 bytes, linear)[ 1.203285] UDP-Lite > hash table entries: 512 (order: 2, 16384 bytes, linear)[ 1.210414] NET: > Registered protocol family 1[ 1.215001] RPC: Registered named UNIX > socket transport module.[ 1.220549] RPC: Registered udp transport > module.[ 1.225224] RPC: Registered tcp transport module.[ 1.229907] > RPC: Registered tcp NFSv4.1 backchannel transport module.[ 1.236334] > PCI: CLS 0 bytes, default 64[ 1.240854] kvm [1]: HYP mode not available[ > 1.247543] Initialise system trusted keyrings[ 1.249234] workingset: > timestamp_bits=44 max_order=18 bucket_order=0[ 1.262658] squashfs: > version 4.0 (2009/01/31) Phillip Lougher[ 1.266308] NFS: Registering the > id_resolver key type[ 1.270690] Key type id_resolver registered[ > 1.274838] Key type id_legacy registered[ 1.278838] nfs4filelayout_init: > NFSv4 File Layout Driver Registering...[ 1.285511] > nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...[ > 1.292908] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.[ > 1.299464] 9p: Installing v9fs 9p2000 file system support[ 1.321024] Key > type asymmetric registered[ 1.322258] Asymmetric key parser 'x509' > registered[ 1.327165] Block layer SCSI generic (bsg) driver version 0.4 > loaded (major 244)[ 1.334506] io scheduler mq-deadline registered[ > 1.339020] io scheduler kyber registered[ 1.344069] pci-host-generic > bfb00000.pci: host bridge /pci@bfb00000 ranges:[ 1.350073] > pci-host-generic bfb00000.pci: MEM 0x10000000..0x1000ffff -> 0x10000000[ > 1.357904] pci-host-generic bfb00000.pci: ECAM at [mem > 0xbfb00000-0xbfbfffff] for [bus 00][ 1.366299] pci-host-generic > bfb00000.pci: PCI host bridge to bus 0000:00[ 1.372967] pci_bus 0000:00: > root bus resource [bus 00][ 1.378171] pci_bus 0000:00: root bus resource > [mem 0x10000000-0x1000ffff][ 1.385056] pci 0000:00:00.0: [110a:4106] > type 00 class 0xff0000[ 1.391048] pci 0000:00:00.0: reg 0x10: [mem > 0x00000000-0x00000fff][ 1.397518] pci 0000:00:01.0: [110a:4106] type 00 > class 0xff0001[ 1.403282] pci 0000:00:01.0: reg 0x10: [mem > 0x00000000-0x00000fff][ 1.409905] pci 0000:00:00.0: BAR 0: assigned [mem > 0x10000000-0x10000fff][ 1.416286] pci 0000:00:01.0: BAR 0: assigned [mem > 0x10001000-0x10001fff][ 1.423676] EINJ: ACPI disabled.[ 1.427098] Bus > freq driver module loaded[ 1.433950] Serial: 8250/16550 driver, 4 ports, > IRQ sharing enabled[ 1.438875] 30890000.serial: ttymxc1 at MMIO > 0x30890000 (irq = 5, base_baud = 1562500) is a IMX[ 1.454472] brd: > module loaded[ 1.460813] loop: module loaded[ 1.504683] imx ahci > driver is registered.[ 1.507384] libphy: Fixed MDIO Bus: probed[ > 1.510933] tun: Universal TUN/TAP device driver, 1.6[ 1.515357] > thunder_xcv, ver 1.0[ 1.518284] thunder_bgx, ver 1.0[ 1.521510] > nicpf, ver 1.0[ 1.524328] Freescale FM module, FMD API version 21.1.0[ > 1.529414] Freescale FM Ports module[ 1.533013] fsl_mac: fsl_mac: FSL > FMan MAC API based driver[ 1.538614] fsl_dpa: FSL DPAA Ethernet driver[ > 1.542943] fsl_advanced: FSL DPAA Advanced drivers:[ 1.547856] > fsl_proxy: FSL DPAA Proxy initialization driver[ 1.553450] fsl_oh: FSL > FMan Offline Parsing port driver[ 1.559103] hclge is initializing[ > 1.561998] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - > version[ 1.569209] hns3: Copyright (c) 2017 Huawei Corporation.[ > 1.574555] e1000: Intel(R) PRO/1000 Network Driver - version > 7.3.21-k8-NAPI[ 1.581534] e1000: Copyright (c) 1999-2006 Intel > Corporation.[ 1.587303] e1000e: Intel(R) PRO/1000 Network Driver - > 3.2.6-k[ 1.593078] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.[ > 1.599025] igb: Intel(R) Gigabit Ethernet Network Driver - version > 5.6.0-k[ 1.605926] igb: Copyright (c) 2007-2014 Intel Corporation.[ > 1.611521] igbvf: Intel(R) Gigabit Virtual Function Network Driver - > version 2.4.0-k[ 1.619298] igbvf: Copyright (c) 2009 - 2012 Intel > Corporation.[ 1.625275] sky2: driver version 1.30[ 1.629226] > ivshmem-net 0000:00:01.0: enabling device (0000 -> 0002)[ 1.635261] > ivshmem-net 0000:00:01.0: TX memory at 0x00000000bfe80000, size > 0x000000000007f000[ 1.643779] ivshmem-net 0000:00:01.0: RX memory at > 0x00000000bfe01000, size 0x000000000007f000_ivshmem 0000:00:00.0: > state_table at 0x00000000bfd00000, size 0x0000000000001000o58s ready[ > 1.667569] uio_ivshmem 0000:00:00.0: rw_section at 0x00000000bfd01000, size > 0x0000000000009000[ 1.676244] uio_ivshmem 0000:00:00.0: input_sections > at 0x00000000bfd0a000, size 0x0000000000006000[ 1.685268] uio_ivshmem > 0000:00:00.0: output_section at 0x00000000bfd0e000, size > 0x0000000000002000[ 1.694814] VFIO - User Level meta-driver version: > 0.3[ 1.700138] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) > Driver[ 1.705933] ehci-pci: EHCI PCI platform driver[ 1.710384] > ehci-platform: EHCI generic platform driver[ 1.715598] ohci_hcd: USB 1.1 > 'Open' Host Controller (OHCI) Driver[ 1.721741] ohci-pci: OHCI PCI > platform driver[ 1.726175] ohci-platform: OHCI generic platform driver[ > 1.731493] usbcore: registered new interface driver usb-storage[ > 1.737402] usbcore: registered new interface driver usbserial_generic[ > 1.743876] usbserial: USB Serial support registered for generic[ > 1.749866] usbcore: registered new interface driver cp210x[ 1.755414] > usbserial: USB Serial support registered for cp210x[ 1.761327] usbcore: > registered new interface driver usb_serial_simple[ 1.767836] usbserial: > USB Serial support registered for carelink[ 1.773904] usbserial: USB > Serial support registered for zio[ 1.779547] usbserial: USB Serial > support registered for funsoft[ 1.785535] usbserial: USB Serial support > registered for flashloader[ 1.791874] usbserial: USB Serial support > registered for google[ 1.797776] usbserial: USB Serial support > registered for libtransistor[ 1.804286] usbserial: USB Serial support > registered for vivopay[ 1.810274] usbserial: USB Serial support > registered for moto_modem[ 1.816526] usbserial: USB Serial support > registered for motorola_tetra[ 1.823127] usbserial: USB Serial support > registered for novatel_gps[ 1.829469] usbserial: USB Serial support > registered for hp4x[ 1.835189] usbserial: USB Serial support registered > for suunto[ 1.841092] usbserial: USB Serial support registered for > siemens_mpi[ 1.848500] i2c /dev entries driver[ 1.850968] usbcore: > registered new interface driver i2c-tiny-usb[ 1.857640] imx-cpufreq-dt: > probe of imx-cpufreq-dt failed with error -2[ 1.863865] sdhci: Secure > Digital Host Controller Interface driver[ 1.869815] sdhci: Copyright(c) > Pierre Ossman[ 1.874218] Synopsys Designware Multimedia Card Interface > Driver[ 1.880265] sdhci-pltfm: SDHCI platform and OF driver helper[ > 1.885988] sdhci-esdhc-imx 30b40000.mmc: could not get pinctrl[ > 1.922878] mmc2: SDHCI controller on 30b40000.mmc [30b40000.mmc] using > ADMA[ 1.927813] ledtrig-cpu: registered to indicate activity on CPUs[ > 1.934117] usbcore: registered new interface driver usbhid[ 1.938650] > usbhid: USB HID core driver[ 1.943182] No fsl,qman node[ 1.945348] > Freescale USDPAA process driver[ 1.949525] fsl-usdpaa: no region found[ > 1.953344] Freescale USDPAA process IRQ driver[ 1.959898] usbcore: > registered new interface driver snd-usb-audio[ 1.966247] pktgen: Packet > Generator for packet performance testing. Version: 2.75[ 1.971766] > drop_monitor: Initializing network drop monitor service[ 1.977889] NET: > Registered protocol family 26[ 1.982808] NET: Registered protocol family > 10[ 1.987363] Segment Routing with IPv6[ 1.990314] NET: Registered > protocol family 17[ 1.994752] 8021q: 802.1Q VLAN Support v1.8[ > 1.998931] lib80211: common routines for IEEE802.11 drivers[ 2.004686] > 9pnet: Installing 9P2000 support[ 2.008803] tsn generic netlink module > v1 init...[ 2.013535] Key type dns_resolver registered[ 2.018325] > registered taskstats version 1[ 2.021787] Loading compiled-in X.509 > certificates[ 2.028774] hctosys: unable to open rtc device (rtc0)[ > 2.031735] clk: Not disabling unused clocks[ 2.035868] ALSA device > list:[ 2.038808] No soundcards found.[ 2.042235] Warning: unable to > open an initial console.[ 2.047626] Waiting for root device > /dev/mmcblk2p2...[ 2.095262] mmc2: new DDR MMC card at address 0001[ > 2.097737] mmcblk2: mmc2:0001 DG4016 14.7 GiB[ 2.101934] mmcblk2boot0: > mmc2:0001 DG4016 partition 1 4.00 MiB[ 2.107842] mmcblk2boot1: mmc2:0001 > DG4016 partition 2 4.00 MiB[ 2.113647] mmcblk2rpmb: mmc2:0001 DG4016 > partition 3 4.00 MiB, chardev (237:0)[ 2.123465] mmcblk2: p1 p2[ > 2.139262] EXT4-fs (mmcblk2p2): mounted filesystem with ordered data mode. > Opts: (null)[ 2.144558] VFS: Mounted root (ext4 filesystem) on device > 179:2.[ 2.150930] devtmpfs: error mounting -2[ 2.156025] Freeing > unused kernel memory: 3712K[ 2.158906] Run /sbin/init as init process[ > 2.162934] Run /etc/init as init process[ 2.166921] Run /bin/init as > init process[ 2.170922] Run /bin/sh as init process[ 2.174728] Kernel > panic - not syncing: No working init found. Try passing init= option to > kernel. See Linux Documentation/admin-guide/init.rst for guidance.[ > 2.188854] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.4.147+gbbb2e2b #1[ > 2.195620] Hardware name: Freescale i.MX8MQ EVK (DT)[ 2.200655] Call > trace:[ 2.203094] dump_backtrace+0x0/0x140[ 2.206734] > show_stack+0x14/0x20[ 2.210036] dump_stack+0xb4/0x110[ 2.213419] > panic+0x158/0x360[ 2.216455] kernel_init+0xf0/0x108[ 2.219929] > ret_from_fork+0x10/0x1c[ 2.223489] SMP: stopping secondary CPUs[ > 2.227396] Kernel Offset: disabled[ 2.230865] CPU features: > 0x0002,2000200c[ 2.234856] Memory Limit: none[ 2.237901] ---[ end > Kernel panic - not syncing: No working init found. Try passing init= > option to kernel. See Linux Documentation/admin-guide/init.rst for > guidance. ]---* > > > -- You received this message because you are subscribed to the Google Groups "Jailhouse" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jailhouse-dev/e3d17a73-37b0-4250-9168-e37a134a4af4n%40googlegroups.com.
