Of course, I checked the configuration for the root cell with "jailhouse config check". However, this is not changed at all while I change the configuration for the guest cells.
Also, everything is fine as long as I don't set the size for the guest cell larger than 320 MiB in the guest cell configuration. This only uses about 62% of the memory area reserved for the guest cells in the configuration for the root cell. I will follow up on the tip to increase the memory area for the hypervisor ( hypervisor_memory.size). So far, 6 MiB is reserved for the hypervisor itself. To what size should I increase this memory area? However, to find the cause in the driver or hypervisor, I lack the necessary knowledge about the structure and relationships. So I have to rely on external help. Thanks a lot! Jan-Marc. -- You received this message because you are subscribed to the Google Groups "Jailhouse" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jailhouse-dev/43f41f9d-0930-416b-a618-1955e237cc87n%40googlegroups.com.
