Grr, my build suffered User Error. Once I built it properly everthing starts to work much better. Thanks for the help!!
# jailhouse enable imx8mm.cell [ 57.058121] jailhouse: firmware: direct-loading firmware jailhouse.bin [ 57.068743] pci-host-generic bb800000.pci: host bridge /pci@0 ranges: [ 57.075325] pci-host-generic bb800000.pci: MEM 0x00bb900000..0x00bb903fff -> 0x00bb900000 [ 57.084068] pci-host-generic bb800000.pci: ECAM at [mem 0xbb800000-0xbb8fffff] for [bus 00] [ 57.092822] pci-host-generic bb800000.pci: PCI host bridge to bus 0001:00 [ 57.099638] pci_bus 0001:00: root bus resource [bus 00] [ 57.104908] pci_bus 0001:00: root bus resource [mem 0xbb900000-0xbb903fff] [ 57.111833] pci 0001:00:00.0: [110a:4106] type 00 class 0xff0000 [ 57.117874] pci 0001:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 57.124382] pci 0001:00:01.0: [110a:4106] type 00 class 0xff0001 [ 57.130430] pci 0001:00:01.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 57.137880] pci 0001:00:00.0: BAR 0: assigned [mem 0xbb900000-0xbb900fff] [ 57.144709] pci 0001:00:01.0: BAR 0: assigned [mem 0xbb901000-0xbb901fff] [ 57.151711] The Jailhouse is opening. root@localhost:~/jailhouse/configs/arm64# On Tuesday, 17 October 2023 at 18:08:08 UTC+1 Dave Marples wrote: > > > Help still appreciated...Can't help getting the feeling I'm missing a > document somewhere whereby all this lot magically becomes easy... > > > Did you also apply the patch that I attached? I'm pretty sure that it's > missing. > > Hi Ralf, > > Thanks for the reply. That patch was indeed missing but applying it didn't > change my symptoms. Just spinning up a yocto image to see where the > differences are. > > Regards > > DAVE > > > > -- You received this message because you are subscribed to the Google Groups "Jailhouse" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jailhouse-dev/bf20ebf0-f447-4e73-8d94-e82b2d8dd836n%40googlegroups.com.
