Eur van Andel wrote:
> On 13 Oct 2008, at 17:39 , [EMAIL PROTECTED] wrote:
> 
>> As a consequence of the missing 'HS' the script which generates the
>> blink-an-led samples chooses to select the internal oscillator. In
>> principle nothing wrong with that, but maybe a rather unusual setup  
>> for
>> 18Fs.
> 
> Now I understand why my leds blinks so slow. I'll re-read the datasheet.

Me not, because when selecting the internal oscillator also 4MHz is 
specified for the clock!  But indeed I saw a lower blinking frequency 
too. I think for the moment I'll put a disclaimer in the blink sample 
about deviations in blinking frequency due to uncontrolled PLL effects.


[from another msg of yours:]
> There is one advantage to this:
> 
>       pragma target CPUDIV _OSC1_OSC2_SRC___1__96MHZ_PLL_SRC___2_
> 
> Newbies will run crying with the tail between their legs! No more  
> requests for USB enabled PICs on the jallist!
> 
> I wonder how you invent these spells. Is this straight from the .dev  
> files? Nasty.

Yes, straight from the .dev file (after removing about 20 types of 
special characters the compiler doesn't like in the specification)!

Only for the OSC type I found more than 140 different descriptions in 
the .dev files, and the related bits (frequency divisions, etc) make it 
even more complex. I tried to 'normalize' but saw no 100% solution.  Now 
that the dev2jal script is somewhat stable I probably must spend some 
time for improvements in this area. But looking at the descriptions of 
other fuse bits of the 18Fs makes me heavy-hearted!

Regards, Rob.

-- 
Rob Hamerling, Vianen, NL (http://www.robh.nl/)

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"jallib" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/jallib?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to