Author: jsuijs
Date: Sun Oct 26 06:19:04 2008
New Revision: 477
Added:
trunk/unvalidated/sample/test/board/board_16f88_js.jal
trunk/unvalidated/sample/test/external/lcd/test_hello_world_lcd.jal
Modified:
trunk/unvalidated/sample/test/board/board_16f648a_js.jal
trunk/unvalidated/sample/test/board/board_16f877a_dwarf.jal
trunk/unvalidated/sample/test/external/lcd/test_lcd_hd44780_4.jal
trunk/unvalidated/sample/test/jal/test_serial_format.jal
Log:
New test, boardfile. all test and board files are jsg compliant now
Modified: trunk/unvalidated/sample/test/board/board_16f648a_js.jal
==============================================================================
--- trunk/unvalidated/sample/test/board/board_16f648a_js.jal (original)
+++ trunk/unvalidated/sample/test/board/board_16f648a_js.jal Sun Oct 26
06:19:04 2008
@@ -1,12 +1,17 @@
---
--------------------------------------------------------------------------
--- BOARD FILE
---
--------------------------------------------------------------------------
--- This file defines the configuration of a specific
--- test-board for JALLIB testing.
+-- ------------------------------------------------------
+-- Title: BOARD FILE for [see filename]
+-- Author: Joep Suijs, Copyright (c) 2008..2008, all rights reserved.
+-- Adapted-by:
+-- Compiler: >=2.4g
--
+-- This file is part of jallib (http://jallib.googlecode.com)
+-- Released under the BSD license
(http://www.opensource.org/licenses/bsd-license.php)
+--
+-- Description: This file defines the configuration of a specific
test-board.
+-- --
-- BOARD DESCRIPTION
-- -----------------
---
+-- --
-- * Darf board connector D0 t/m D7 pin-out of the test board:
-- D0 A0
-- D1 A1
@@ -16,18 +21,20 @@
-- D5 B4
-- D6 B3
-- D7 B1
---
+-- --
-- * 20 MHz resonator
---
+-- --
-- Dwarf LCD connection (with 2 additional LEDS)
-- D0 t/m D3 = dataport high nibble
-- D4 = E
-- D5 = RS
-- D6, D7 = led
--
+-- Sources:
+--
+-- Notes:
--
--- At the end, include a specific test.
---
--------------------------------------------------------------------------
+-- ------------------------------------------------------
-- chip setup
include 16f648a
Modified: trunk/unvalidated/sample/test/board/board_16f877a_dwarf.jal
==============================================================================
--- trunk/unvalidated/sample/test/board/board_16f877a_dwarf.jal (original)
+++ trunk/unvalidated/sample/test/board/board_16f877a_dwarf.jal Sun Oct 26
06:19:04 2008
@@ -1,19 +1,29 @@
---
--------------------------------------------------------------------------
--- BOARD FILE
---
--------------------------------------------------------------------------
--- This file defines the configuration of a specific
--- test-board for JALLIB testing.
+-- ------------------------------------------------------
+-- Title: BOARD FILE for [see filename]
+-- Author: Joep Suijs, Copyright (c) 2008..2008, all rights reserved.
+-- Adapted-by:
+-- Compiler: >=2.4g
--
+-- This file is part of jallib (http://jallib.googlecode.com)
+-- Released under the BSD license
(http://www.opensource.org/licenses/bsd-license.php)
+--
+-- Description: This file defines the configuration of a specific
test-board.
+-- --
+-- BOARD DESCRIPTION
+-- -----------------
+-- --
-- DB01 - Dwarf board for 40pin pic
-- DBxx (8 leds) on port A
-- DB017 (LCD) on port B
+--
+-- Sources:
+--
+-- Notes:
--
---
--------------------------------------------------------------------------
--- At the end, include a specific test.
---
--------------------------------------------------------------------------
+-- ------------------------------------------------------
-- chip setup
-include 16F877a
+include 16f877a
pragma target clock 20_000_000 -- xtal frequency
pragma target OSC hs
@@ -21,8 +31,8 @@
pragma target WDT disabled
-- LED setup
-var bit LED is pin_a0
-var bit LED_direction is pin_a0_direction
+var bit led is pin_a0
+var bit led_direction is pin_a0_direction
-- PWM setup
var bit pwm_direction = pin_b0_direction
Added: trunk/unvalidated/sample/test/board/board_16f88_js.jal
==============================================================================
--- (empty file)
+++ trunk/unvalidated/sample/test/board/board_16f88_js.jal Sun Oct 26
06:19:04 2008
@@ -0,0 +1,75 @@
+-- ------------------------------------------------------
+-- Title: BOARD FILE for [see filename]
+-- Author: Joep Suijs, Copyright (c) 2008..2008, all rights reserved.
+-- Adapted-by:
+-- Compiler: >=2.4g
+--
+-- This file is part of jallib (http://jallib.googlecode.com)
+-- Released under the BSD license
(http://www.opensource.org/licenses/bsd-license.php)
+--
+-- Description: This file defines the configuration of a specific
test-board.
+-- --
+-- BOARD DESCRIPTION
+-- -----------------
+-- --
+-- * Darf board connector D0 t/m D7 pin-out of the test board:
+-- D0 A0
+-- D1 A1
+-- D2 A2
+-- D3 A3
+-- D4 B0
+-- D5 B4
+-- D6 B3
+-- D7 B1
+-- --
+-- * 20 MHz resonator
+-- --
+-- Dwarf LCD connection (with 2 additional LEDS)
+-- D0 t/m D3 = dataport high nibble
+-- D4 = E
+-- D5 = RS
+-- D6, D7 = led
+--
+-- Sources:
+--
+-- Notes:
+--
+-- ------------------------------------------------------
+
+-- chip setup
+include 16f88
+
+--
+-- This program assumes a 20 MHz resonator or crystal
+-- is connected to pins OSC1 and OSC2.
+pragma target OSC HS -- HS crystal or resonator
+pragma target clock 20_000_000 -- oscillator frequency
+pragma target WDT disabled
+pragma target LVP disabled
+
+-- LED setup
+var bit led is pin_b3 -- alias
+var bit led_direction is pin_b3_direction
+
+-- PWM setup
+;var bit pwm_direction = pin_b0_direction
+
+-- LCD setup
+var bit lcd_rs is pin_b4 -- LCD command/data select.
+var bit lcd_rs_direction is pin_b4_direction
+var bit lcd_en is pin_b0 -- LCD data trigger
+var bit lcd_en_direction is pin_b0_direction
+
+var byte lcd_dataport is porta_low -- LCD data port
+var byte lcd_dataport_direction is porta_low_direction -- LCD data port
+const byte LCD_ROWS = 2 -- 2 lines
+const byte LCD_CHARS = 16 -- 16 chars per line
+
+-- I2C setup
+var volatile bit i2c_scl is pin_b4
+var volatile bit i2c_scl_direction is pin_b4_direction
+var volatile bit i2c_sda is pin_b3
+var volatile bit i2c_sda_direction is pin_b3_direction
+
+-- ccp setup
+var volatile bit pin_ccp1_direction is pin_b3_direction
Added: trunk/unvalidated/sample/test/external/lcd/test_hello_world_lcd.jal
==============================================================================
--- (empty file)
+++ trunk/unvalidated/sample/test/external/lcd/test_hello_world_lcd.jal Sun
Oct 26 06:19:04 2008
@@ -0,0 +1,80 @@
+-- Title: Hello world with an LCD
+-- Author: Eur Van Andel, Copyright (c) 2008, all rights reserved.
+-- Adapted-by: Rob Hamerling, Joep Suijs
+-- Compiler: >=2.4g
+--
+-- This file is part of jallib (http://jallib.googlecode.com)
+-- Released under the BSD license
(http://www.opensource.org/licenses/bsd-license.php)
+--
+-- Description: this sample shows how to setup an LCD and writes
+-- "Hello World" to the first line, using a string and the print library.
+-- Line 3 and line 4 are used as well, but will work properly only on a
4x20 LCD.
+-- A counter is printed to show the running forever loop.
+--
+
+;include 16f88
+
+;pragma target CLOCK 20_000_000 -- xtal frequency
+;pragma target OSC HS
+;pragma target LVP disabled
+;pragma target WDT disabled
+
+enable_digital_io()
+
+;var bit LED is pin_A4 -- LED to see proper PIC startup
+led_direction = output
+
+;const LCD_ROWS = 4 -- 4x20 LCD
+;const LCD_CHARS = 20
+;var bit LCD_RS is pin_B6 -- LCD command/data select.
+;var bit LCD_EN is pin_B7 -- LCD data trigger
+;var byte lcd_dataport is portA_low -- LCD data
+
+;portA_direction = all_output -- LCD data and LED on portA
+;portB_direction = all_output -- LCD handshake lines on portB
+
+lcd_rs_direction = output
+lcd_en_direction = output
+lcd_dataport_direction = output
+
+include lcd_hd44780_4 -- LCD library with 4 data lines
+include print -- formatted output library
+;include delay_any_mc -- delay library
+
+for 4 loop -- blink LED 4 times
+ LED = on
+ delay_100ms(2)
+ LED = off
+ delay_100ms(2)
+end loop
+
+const byte str1[] = "Hello world!" -- define strings
+const byte str2[] = "third line"
+const byte str3[] = "fourth line"
+
+lcd_init() -- initialize LCD
+
+print_string(lcd, str1) -- show hello world!
+lcd_setcursor(2,0) -- to 3rd line
+print_string(lcd, str2)
+lcd_setcursor(3,0) -- to 4th line
+print_string(lcd, str3)
+
+var byte counter = 0
+
+forever loop -- loop forever
+
+ counter = counter + 1 -- update counter
+ lcd_setcursor(1,0) -- second line
+ print_byte_hex(lcd, counter) -- output in hex format
+ delay_100ms(3) -- wait a little
+
+ if counter == 255 then -- counter wrap
+ lcd_setcursor(1,1) -- 2nd line, 2nd char
+ lcd = " " -- clear 2nd char
+ lcd = " " -- clear 3rd char
+ end if
+
+end loop
+
+
Modified: trunk/unvalidated/sample/test/external/lcd/test_lcd_hd44780_4.jal
==============================================================================
--- trunk/unvalidated/sample/test/external/lcd/test_lcd_hd44780_4.jal
(original)
+++ trunk/unvalidated/sample/test/external/lcd/test_lcd_hd44780_4.jal Sun
Oct 26 06:19:04 2008
@@ -1,22 +1,33 @@
---
--------------------------------------------------------------------------
--- LCD_hd44780_4 TEST file
---
--------------------------------------------------------------------------
+-- ------------------------------------------------------
+-- Title: Test program for i2c_software.jal
+--
+-- Author: Joep Suijs, Copyright (c) 2008..2008, all rights reserved.
+--
+-- Adapted-by:
+--
+-- Compiler: >=2.4g
+--
+-- This file is part of jallib (http://jallib.googlecode.com)
+-- Released under the BSD license
(http://www.opensource.org/licenses/bsd-license.php)
+--
+-- Description: Level 0 i2c test program
+-- interact with an i2c eeprom using the i2c primitives
+-- --
-- This file defines a test for JALLIB testing, using a test-board
-- defined by a BOARD file .
--
--- setup: an hd44780 compatible display, used in 4-bit mode.
+-- Sources:
--
---
--------------------------------------------------------------------------
+-- Notes:
+-- setup: an hd44780 compatible display, used in 4-bit mode.
--
--
--------------------------------------------------------------------------
-
-
include delay
enable_digital_io()
-lcd_RS_direction = output
-lcd_EN_direction = output
+lcd_rs_direction = output
+lcd_en_direction = output
;lcd_d4_direction = output
;lcd_d5_direction = output
;lcd_d6_direction = output
Modified: trunk/unvalidated/sample/test/jal/test_serial_format.jal
==============================================================================
--- trunk/unvalidated/sample/test/jal/test_serial_format.jal (original)
+++ trunk/unvalidated/sample/test/jal/test_serial_format.jal Sun Oct 26
06:19:04 2008
@@ -1,10 +1,7 @@
-- ------------------------------------------------------
-- Title: Test program for format.jal
---
-- Author: Joep Suijs, Copyright (c) 2008..2008, all rights reserved.
---
-- Adapted-by:
---
-- Compiler: >=2.4g
--
-- This file is part of jallib (http://jallib.googlecode.com)
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"jallib" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at
http://groups.google.com/group/jallib?hl=en
-~----------~----~----~----~------~----~------~--~---
