Author: jsuijs
Date: Sun Oct 26 11:15:38 2008
New Revision: 485
Modified:
trunk/unvalidated/sample/test/board/board_16f88_js.jal
Log:
pwm setup corrected.
Modified: trunk/unvalidated/sample/test/board/board_16f88_js.jal
==============================================================================
--- trunk/unvalidated/sample/test/board/board_16f88_js.jal (original)
+++ trunk/unvalidated/sample/test/board/board_16f88_js.jal Sun Oct 26
11:15:38 2008
@@ -42,18 +42,16 @@
--
-- This program assumes a 20 MHz resonator or crystal
-- is connected to pins OSC1 and OSC2.
-pragma target OSC HS -- HS crystal or resonator
-pragma target clock 20_000_000 -- oscillator frequency
-pragma target WDT disabled
-pragma target LVP disabled
+pragma target OSC HS -- HS crystal or resonator
+pragma target clock 20_000_000 -- oscillator frequency
+pragma target WDT disabled
+pragma target LVP disabled
+pragma target CCP1MUX RB3
-- LED setup
var bit led is pin_b3 -- alias
var bit led_direction is pin_b3_direction
--- PWM setup
-;var bit pwm_direction = pin_b0_direction
-
-- LCD setup
var bit lcd_rs is pin_b4 -- LCD command/data select.
var bit lcd_rs_direction is pin_b4_direction
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"jallib" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at
http://groups.google.com/group/jallib?hl=en
-~----------~----~----~----~------~----~------~--~---
