Author: jsuijs
Date: Sun Nov 30 11:26:58 2008
New Revision: 603
Modified:
trunk/unvalidated/sample/test/board/board_16f648a_js.jal
Log:
converted for mac to dos format.
Modified: trunk/unvalidated/sample/test/board/board_16f648a_js.jal
==============================================================================
--- trunk/unvalidated/sample/test/board/board_16f648a_js.jal (original)
+++ trunk/unvalidated/sample/test/board/board_16f648a_js.jal Sun Nov 30
11:26:58 2008
@@ -1 +1,78 @@
--- ------------------------------------------------------
-- Title: BOARD FILE for [see filename]
-- Author: Joep Suijs, Copyright (c) 2008..2008, all rights reserved.
-- Adapted-by:
-- Compiler: >=2.4g
--
-- This file is part of jallib (http://jallib.googlecode.com)
-- Released under the BSD license
(http://www.opensource.org/licenses/bsd-license.php)
--
-- Description: This file defines the configuration of a specific
test-board.
-- --
-- BOARD DESCRIPTION
-- -----------------
-- --
-- * Darf board connector D0 t/m D7 pin-out of the test board:
-- D0 A0
-- D1 A1
-- D2 A2
-- D3 A3
-- D4 B0
-- D5 B4
-- D6 B3
-- D7 B1
-- --
-- * 20 MHz resonator
-- --
-- Dwarf LCD connection (with 2 additional LEDS)
-- D0 t/m D3 = dataport high nibble
-- D4 = E
-- D5 = RS
-- D6, D7 = led
--
-- Sources:
--
-- Notes:
--
-- ------------------------------------------------------
;@jallib section chipdef
-- chip setup
include 16f648a
--
-- This program assumes a 20 MHz resonator or crystal
-- is connected to pins OSC1 and OSC2.
pragma target OSC HS -- HS crystal or resonator
pragma target clock 20_000_000 -- oscillator frequency
pragma target WDT disabled
pragma target LVP disabled
;@jallib section led
-- LED IO definition
var bit led is pin_b3
var bit led_direction is pin_b3_direction
;@jallib section lcd_hd44780_4
-- LCD IO definition
var bit lcd_rs is pin_b4 -- LCD command/data select.
var bit lcd_rs_direction is pin_b4_direction
var bit lcd_en is pin_b0 -- LCD data trigger
var bit lcd_en_direction is pin_b0_direction
var byte lcd_dataport is porta_low -- LCD data port
var byte lcd_dataport_direction is porta_low_direction
const byte LCD_ROWS = 2 -- 2 lines
const byte LCD_CHARS = 16 -- 16 chars per line
;@jallib section i2c
-- I2C io definition
var volatile bit i2c_scl is pin_b4
var volatile bit i2c_scl_direction is pin_b4_direction
var volatile bit i2c_sda is pin_b3
var volatile bit i2c_sda_direction is pin_b3_direction
;@jallib section ccp
-- ccp setup
var volatile bit pin_ccp1_direction is pin_b3_direction
\ No newline at end of file
+-- ------------------------------------------------------
+-- Title: BOARD FILE for [see filename]
+-- Author: Joep Suijs, Copyright (c) 2008..2008, all rights reserved.
+-- Adapted-by:
+-- Compiler: >=2.4g
+--
+-- This file is part of jallib (http://jallib.googlecode.com)
+-- Released under the BSD license
(http://www.opensource.org/licenses/bsd-license.php)
+--
+-- Description: This file defines the configuration of a specific
test-board.
+-- --
+-- BOARD DESCRIPTION
+-- -----------------
+-- --
+-- * Darf board connector D0 t/m D7 pin-out of the test board:
+-- D0 A0
+-- D1 A1
+-- D2 A2
+-- D3 A3
+-- D4 B0
+-- D5 B4
+-- D6 B3
+-- D7 B1
+-- --
+-- * 20 MHz resonator
+-- --
+-- Dwarf LCD connection (with 2 additional LEDS)
+-- D0 t/m D3 = dataport high nibble
+-- D4 = E
+-- D5 = RS
+-- D6, D7 = led
+--
+-- Sources:
+--
+-- Notes:
+--
+-- ------------------------------------------------------
+
+;@jallib section chipdef
+-- chip setup
+include 16f648a
+
+--
+-- This program assumes a 20 MHz resonator or crystal
+-- is connected to pins OSC1 and OSC2.
+pragma target OSC HS -- HS crystal or resonator
+pragma target clock 20_000_000 -- oscillator frequency
+pragma target WDT disabled
+pragma target LVP disabled
+
+
+;@jallib section led
+-- LED IO definition
+var bit led is pin_b3
+var bit led_direction is pin_b3_direction
+
+;@jallib section lcd_hd44780_4
+-- LCD IO definition
+var bit lcd_rs is pin_b4 -- LCD command/data select.
+var bit lcd_rs_direction is pin_b4_direction
+var bit lcd_en is pin_b0 -- LCD data trigger
+var bit lcd_en_direction is pin_b0_direction
+
+var byte lcd_dataport is porta_low -- LCD data port
+var byte lcd_dataport_direction is porta_low_direction
+const byte LCD_ROWS = 2 -- 2 lines
+const byte LCD_CHARS = 16 -- 16 chars per line
+
+;@jallib section i2c
+-- I2C io definition
+var volatile bit i2c_scl is pin_b4
+var volatile bit i2c_scl_direction is pin_b4_direction
+var volatile bit i2c_sda is pin_b3
+var volatile bit i2c_sda_direction is pin_b3_direction
+
+;@jallib section ccp
+-- ccp setup
+var volatile bit pin_ccp1_direction is pin_b3_direction
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"jallib" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at
http://groups.google.com/group/jallib?hl=en
-~----------~----~----~----~------~----~------~--~---
